安装更新后 thinkpad t61 显卡驱动失效

[hukaiforever]

安装了下更新包 结果把显卡驱动给弄坏了
知道瞎折腾的后果了

代码： 全选

sudo nvidia-xconfig

出现这样的提示：

代码： 全选

Using X configuration file: "/etc/X11/xorg.conf".
Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup'
New X configuration file written to '/etc/X11/xorg.conf'

我再把xorg.conf的内容贴出来

代码： 全选

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen         "Default Screen" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Module"
    Load           "glx"
EndSection

Section "InputDevice"
    Identifier     "Keyboard0"
    Driver         "keyboard"
EndSection

Section "InputDevice"
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
    Identifier     "Configured Monitor"
EndSection

Section "Device"
    Identifier     "Configured Video Device"
    Driver         "nvidia"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "Configured Video Device"
    Monitor        "Configured Monitor"
    DefaultDepth    24
    Option         "NoLogo" "True"
    SubSection     "Display"
        Depth       24
        Modes      "nvidia-auto-select"
    EndSubSection
EndSection

我想通过 系统》系统设置》硬件驱动 安装 177版本的驱动 点完以后没有反应


在线等解决方法，谢谢各位

[hukaiforever]

有过类似问题的 T61用户 给个xorg.conf 文件来覆盖一下把

[hukaiforever]

顶阿～

[hukaiforever]

我晕 还没到饭点把 各位｀

[风之伤]

我的也是，天啦，这几天白忙活了！

[vampc]

贴一下我的吧，官方网站下的驱动www.nvidia.com,版本：180.29，
关键是注释掉
# HorizSync 46.4 - 55.6
# VertRefresh 50.0 - 60.0
这两行，不然分辨率有冲突。


# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Thu Feb 5 00:18:17 PST 2009

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Mon Nov 3 08:46:46 UTC 2008

Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
# Load "type1"
Load "freetype"
Load "glx"
EndSection

Section "ServerFlags"
Option "Xinerama" "0"
EndSection

Section "InputDevice"

# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "Monitor"

# HorizSync 46.4 - 55.6
# VertRefresh 50.0 - 60.0
Identifier "Monitor0"
VendorName "Unknown"
ModelName "LEN"
Option "DPMS"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "Quadro NVS 140M"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "1440x900_60 +0+0; nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection