UG NX6 for Linux已可下载
-
- 帖子: 13
- 注册时间: 2008-09-28 21:21
UG NX6 for Linux已可下载
可是我找不到lic,它的安装方法也看得头大。。。
附种: 用µTorrent下BT,
附种: 用µTorrent下BT,
- 附件
-
- Unigraphics+NX+6+Linux+64.rar
- UG NX6
- (17.34 KiB) 已下载 1221 次
-
- 帖子: 13
- 注册时间: 2008-09-28 21:21
-
- 帖子: 13
- 注册时间: 2008-09-28 21:21
Re: UG NX6 for Linux已可下载
随便问下,这里的FTP怎么用?
- eagle5678
- 帖子: 1865
- 注册时间: 2006-07-08 14:07
Re: UG NX6 for Linux已可下载
据说要叫老大开权限Botaski 写了:随便问下,这里的FTP怎么用?
-
- 帖子: 59
- 注册时间: 2007-12-06 14:06
Re: UG NX6 for Linux已可下载
找老大申请下,传上去吧
BT下老慢
BT下老慢
-
- 帖子: 14
- 注册时间: 2008-03-26 20:16
- 来自: 山东·青岛
- 联系:
Re: UG NX6 for Linux已可下载
强烈关注!
-
- 帖子: 2
- 注册时间: 2009-03-15 9:57
Re: UG NX6 for Linux已可下载
NX在ubuntu下只能运行于7.04版本的64位系统上,官方对Suse Linux的支持比较好。而且这压缩包看来似乎没有lic文件,可以和windows下的通用。
-
- 帖子: 13
- 注册时间: 2008-09-28 21:21
Re: UG NX6 for Linux已可下载
本人在虚拟机中用SLED 10 SP2lagameon 写了:NX在ubuntu下只能运行于7.04版本的64位系统上,官方对Suse Linux的支持比较好。而且这压缩包看来似乎没有lic文件,可以和windows下的通用。
但是是32的。。。
还有这个NX6是不能用迅雷等吸血BT客户端下的,用它们,下载速度会非常非常慢的
-
- 帖子: 24
- 注册时间: 2008-03-27 21:59
Re: UG NX6 for Linux已可下载
4.0在用中,6.0下来研究下。
-
- 帖子: 8
- 注册时间: 2008-02-04 16:11
Re: UG NX6 for Linux已可下载
Botaski, 小弟实在下不了啊,一点速度都没有。。。 大哥帮帮忙,行行好,喜欢到FTP 或者传给我吧,感激涕零~~~QQ:562885302
-
- 帖子: 7
- 注册时间: 2008-05-04 8:55
Re: UG NX6 for Linux已可下载
什么是偶可以下载阿,我这里4.0怎么也用不了
速度阿。。。。
其实我个人觉得5.0最好用,嘿嘿
速度阿。。。。
其实我个人觉得5.0最好用,嘿嘿
-
- 帖子: 13
- 注册时间: 2008-09-28 21:21
Re: UG NX6 for Linux已可下载
用Ut绝对有速度 的:em06xinghe 写了:Botaski, 小弟实在下不了啊,一点速度都没有。。。 大哥帮帮忙,行行好,喜欢到FTP 或者传给我吧,感激涕零~~~QQ:562885302
PS:我是他同学,发帖本人因为校园网络资费用光。下月才能上网。本学校网络流量有定量。
-
- 帖子: 2
- 注册时间: 2009-03-17 4:14
Re: UG NX6 for Linux已可下载
I am sorry I can not input Chinese character at this moment.
I found the installation on these tow wibsite for installing NX5
http://ubuntuforums.org/showthread.php?t=681842&page=2
http://ubuntuforums.org/showpost.php?s= ... ostcount=5
I seucceed to install NX6.I had tried to start it , but failed because of the license.
wish you good luck.
I have done as following:
1) copy the contents of the nx5 install DVD to a temporary location so that we can alter the install script:
Code:
mkdir /home/joebloggs/Desktop/ugnx
cp /cdrom/ /home/joebloggs/Desktop/ugnx/
chmod a+x -R /home/joebloggs/Desktop/ugnx/
2) install some dependencies
Code:
sudo apt-get install libmotif3 tcsh ksh libstdc++5
3) open the install script for some editing
Code:
gedit /home/joebloggs/Desktop/ugnx/ugnx050/ug_install
4) find this section in the file:
Quote:
Linux) # Machine type Linux
PATH=.:/sbin:/usr/sbin:/usr/bin:/bin:/etc ; export PATH # Set the PATH
UGS_TMP=/tmp/ugs_tmp # Define a stash area for old files.
X11_DIR=/usr/lib/X11 # X11 directory for this system.
PS_CMD="ps -ef" # ps command for this system.
DF_CMD="df -k" # df command for this system.
AWK_CMD=awk # awk command for this system.
RC_DIR=/etc/rc.d # Dir for real rc scripts
RC_LNK_DIR=/etc/rc.d/rc5.d # Dir for links to rc scripts
TMP_DIR=/tmp # Tmp directory.
LPATH_VAR_NAME=LD_LIBRARY_PATH # Library path var name. V160P14
RC_PATH_VAR=/sbin:/usr/sbin:/usr/bin:/bin:/etc
alias -x pwd='pwd -L' # Tweak Linux pwd to give logical pwd.
alias -x uncompress=gunzip # On SuSE 10 must use gunzip. NX050P24
and change it to:
Quote:
Linux) # Machine type Linux
PATH=.:/sbin:/usr/sbin:/usr/bin:/bin:/etc ; export PATH # Set the PATH
UGS_TMP=/tmp/ugs_tmp # Define a stash area for old files.
X11_DIR=/etc/X11 # X11 directory for this system.
PS_CMD="ps -ef" # ps command for this system.
DF_CMD="df -k" # df command for this system.
AWK_CMD=awk # awk command for this system.
RC_DIR=/etc/init.d # Dir for real rc scripts
RC_LNK_DIR=/etc/rc2.d # Dir for links to rc scripts
TMP_DIR=/tmp # Tmp directory.
LPATH_VAR_NAME=LD_LIBRARY_PATH # Library path var name. V160P14
RC_PATH_VAR=/sbin:/usr/sbin:/usr/bin:/bin:/etc
alias -x pwd='pwd -L' # Tweak Linux pwd to give logical pwd.
alias -x uncompress=gunzip # On SuSE 10 must use gunzip. NX050P24
5) the script fails to correctly check if no products have been selected for install. I did not find a way to correct this, I commented out the selection checking part of the code. Change this:
Quote:
echo $FSETS | grep "[A-z]" >$NULL || {
print "${MSG}no products selected."
sleep 2 ; continue 2
[ "$Q_SWT" ] && { print "${ERR}no products selected." ; exit 1 ;}
} # End empty FSETS ck.
to this:
Quote:
# echo $FSETS | grep "[A-z]" >$NULL || {
# print "${MSG}no products selected."
# sleep 2 ; continue 2
# [ "$Q_SWT" ] && { print "${ERR}no products selected." ; exit 1 ;}
#} # End empty FSETS ck.
6) After you have made these changes save the file and the installer should run fine:
Code:
sudo /home/joebloggs/Desktop/ugnx/ugnx050/ug_install
7)modify license file
Hopefully by now you got your license file from UGS, I use the Windows version, it seems working.
Open it with sudo.
Modify 16th(first line?) line: SERVER hostname COMPOSITE=xxxxxxxxxxxxx portnumber
Replace hostname(linke ubuntu) and portnumber (usually 28000). Hostname is usually the hostname of your computer.
8) open the licence install script for editing
Code:
gedit /home/joebloggs/Desktop/ugnx/ugnx050/ugslicensing/ugslicensing_install
9) find the section:
Quote:
Linux) # Machine type Linux
alias -x df="df -k" # Alias df to df -k, gives K bytes.
alias -x pwd='pwd -L' # Alias pwd to give a logical pwd.
alias -x echo=print # Alias echo to print.
DEFAULT_MEDIA=/media/dvd # Default name for the CD/DVD media.
PATH=.:/sbin:/usr/sbin:/usr/bin:/bin:/etc # Set the PATH
PS_CMD="ps -ef" # ps command for this system.
PROD_SIZE=3600(4500?) # Hard coded size for this plat.
RC_DIR=/etc/rc.d # Dir for real rc scripts
RC_LNK_DIR=/etc/rc.d/rc5.d # Dir for links to rc scripts
RC_PATH_VAR=/sbin:/usr/sbin:/usr/bin:/bin:/etc # Path used in the rc script.
RC_SCRIPTNAME=rc.ugs.licensing # The rc script name.
RC_LNK_NAME=S91$RC_SCRIPTNAME # Name for sym link in rc lnk dir.
RESTART_DELAY=10 # Daemon Restart delay in seconds.
TMP_DIR=/tmp # Tmp directory for this plat.
UGS_TMP=/tmp/ugs_tmp # Define a stash area for old files.
and change it to:
Quote:
Linux) # Machine type Linux
alias -x df="df -k" # Alias df to df -k, gives K bytes.
alias -x pwd='pwd -L' # Alias pwd to give a logical pwd.
alias -x echo=print # Alias echo to print.
DEFAULT_MEDIA=/media/dvd # Default name for the CD/DVD media.
PATH=.:/sbin:/usr/sbin:/usr/bin:/bin:/etc # Set the PATH
PS_CMD="ps -ef" # ps command for this system.
PROD_SIZE=3600 # Hard coded size for this plat.
RC_DIR=/etc/init.d # Dir for real rc scripts
RC_LNK_DIR=/etc/rc2.d # Dir for links to rc scripts
RC_PATH_VAR=/sbin:/usr/sbin:/usr/bin:/bin:/etc # Path used in the rc script.
RC_SCRIPTNAME=rc.ugs.licensing # The rc script name.
RC_LNK_NAME=S91$RC_SCRIPTNAME # Name for sym link in rc lnk dir.
RESTART_DELAY=10 # Daemon Restart delay in seconds.
TMP_DIR=/tmp # Tmp directory for this plat.
UGS_TMP=/tmp/ugs_tmp # Define a stash area for old files.
10) Save the file, you can run the install script for the licence server now:
Code:
sudo /home/joebloggs/Desktop/ugnx/ugslicensing/ugslicensing_install
11) The startup script to automatically run the licence server when the machine starts needs some attention:
Code:
sudo chmod u+x /etc/init.d/rc.ugs.licensing
sudo update-rc.d rc.ugs.licensing defaults
I found the installation on these tow wibsite for installing NX5
http://ubuntuforums.org/showthread.php?t=681842&page=2
http://ubuntuforums.org/showpost.php?s= ... ostcount=5
I seucceed to install NX6.I had tried to start it , but failed because of the license.
wish you good luck.
I have done as following:
1) copy the contents of the nx5 install DVD to a temporary location so that we can alter the install script:
Code:
mkdir /home/joebloggs/Desktop/ugnx
cp /cdrom/ /home/joebloggs/Desktop/ugnx/
chmod a+x -R /home/joebloggs/Desktop/ugnx/
2) install some dependencies
Code:
sudo apt-get install libmotif3 tcsh ksh libstdc++5
3) open the install script for some editing
Code:
gedit /home/joebloggs/Desktop/ugnx/ugnx050/ug_install
4) find this section in the file:
Quote:
Linux) # Machine type Linux
PATH=.:/sbin:/usr/sbin:/usr/bin:/bin:/etc ; export PATH # Set the PATH
UGS_TMP=/tmp/ugs_tmp # Define a stash area for old files.
X11_DIR=/usr/lib/X11 # X11 directory for this system.
PS_CMD="ps -ef" # ps command for this system.
DF_CMD="df -k" # df command for this system.
AWK_CMD=awk # awk command for this system.
RC_DIR=/etc/rc.d # Dir for real rc scripts
RC_LNK_DIR=/etc/rc.d/rc5.d # Dir for links to rc scripts
TMP_DIR=/tmp # Tmp directory.
LPATH_VAR_NAME=LD_LIBRARY_PATH # Library path var name. V160P14
RC_PATH_VAR=/sbin:/usr/sbin:/usr/bin:/bin:/etc
alias -x pwd='pwd -L' # Tweak Linux pwd to give logical pwd.
alias -x uncompress=gunzip # On SuSE 10 must use gunzip. NX050P24
and change it to:
Quote:
Linux) # Machine type Linux
PATH=.:/sbin:/usr/sbin:/usr/bin:/bin:/etc ; export PATH # Set the PATH
UGS_TMP=/tmp/ugs_tmp # Define a stash area for old files.
X11_DIR=/etc/X11 # X11 directory for this system.
PS_CMD="ps -ef" # ps command for this system.
DF_CMD="df -k" # df command for this system.
AWK_CMD=awk # awk command for this system.
RC_DIR=/etc/init.d # Dir for real rc scripts
RC_LNK_DIR=/etc/rc2.d # Dir for links to rc scripts
TMP_DIR=/tmp # Tmp directory.
LPATH_VAR_NAME=LD_LIBRARY_PATH # Library path var name. V160P14
RC_PATH_VAR=/sbin:/usr/sbin:/usr/bin:/bin:/etc
alias -x pwd='pwd -L' # Tweak Linux pwd to give logical pwd.
alias -x uncompress=gunzip # On SuSE 10 must use gunzip. NX050P24
5) the script fails to correctly check if no products have been selected for install. I did not find a way to correct this, I commented out the selection checking part of the code. Change this:
Quote:
echo $FSETS | grep "[A-z]" >$NULL || {
print "${MSG}no products selected."
sleep 2 ; continue 2
[ "$Q_SWT" ] && { print "${ERR}no products selected." ; exit 1 ;}
} # End empty FSETS ck.
to this:
Quote:
# echo $FSETS | grep "[A-z]" >$NULL || {
# print "${MSG}no products selected."
# sleep 2 ; continue 2
# [ "$Q_SWT" ] && { print "${ERR}no products selected." ; exit 1 ;}
#} # End empty FSETS ck.
6) After you have made these changes save the file and the installer should run fine:
Code:
sudo /home/joebloggs/Desktop/ugnx/ugnx050/ug_install
7)modify license file
Hopefully by now you got your license file from UGS, I use the Windows version, it seems working.
Open it with sudo.
Modify 16th(first line?) line: SERVER hostname COMPOSITE=xxxxxxxxxxxxx portnumber
Replace hostname(linke ubuntu) and portnumber (usually 28000). Hostname is usually the hostname of your computer.
8) open the licence install script for editing
Code:
gedit /home/joebloggs/Desktop/ugnx/ugnx050/ugslicensing/ugslicensing_install
9) find the section:
Quote:
Linux) # Machine type Linux
alias -x df="df -k" # Alias df to df -k, gives K bytes.
alias -x pwd='pwd -L' # Alias pwd to give a logical pwd.
alias -x echo=print # Alias echo to print.
DEFAULT_MEDIA=/media/dvd # Default name for the CD/DVD media.
PATH=.:/sbin:/usr/sbin:/usr/bin:/bin:/etc # Set the PATH
PS_CMD="ps -ef" # ps command for this system.
PROD_SIZE=3600(4500?) # Hard coded size for this plat.
RC_DIR=/etc/rc.d # Dir for real rc scripts
RC_LNK_DIR=/etc/rc.d/rc5.d # Dir for links to rc scripts
RC_PATH_VAR=/sbin:/usr/sbin:/usr/bin:/bin:/etc # Path used in the rc script.
RC_SCRIPTNAME=rc.ugs.licensing # The rc script name.
RC_LNK_NAME=S91$RC_SCRIPTNAME # Name for sym link in rc lnk dir.
RESTART_DELAY=10 # Daemon Restart delay in seconds.
TMP_DIR=/tmp # Tmp directory for this plat.
UGS_TMP=/tmp/ugs_tmp # Define a stash area for old files.
and change it to:
Quote:
Linux) # Machine type Linux
alias -x df="df -k" # Alias df to df -k, gives K bytes.
alias -x pwd='pwd -L' # Alias pwd to give a logical pwd.
alias -x echo=print # Alias echo to print.
DEFAULT_MEDIA=/media/dvd # Default name for the CD/DVD media.
PATH=.:/sbin:/usr/sbin:/usr/bin:/bin:/etc # Set the PATH
PS_CMD="ps -ef" # ps command for this system.
PROD_SIZE=3600 # Hard coded size for this plat.
RC_DIR=/etc/init.d # Dir for real rc scripts
RC_LNK_DIR=/etc/rc2.d # Dir for links to rc scripts
RC_PATH_VAR=/sbin:/usr/sbin:/usr/bin:/bin:/etc # Path used in the rc script.
RC_SCRIPTNAME=rc.ugs.licensing # The rc script name.
RC_LNK_NAME=S91$RC_SCRIPTNAME # Name for sym link in rc lnk dir.
RESTART_DELAY=10 # Daemon Restart delay in seconds.
TMP_DIR=/tmp # Tmp directory for this plat.
UGS_TMP=/tmp/ugs_tmp # Define a stash area for old files.
10) Save the file, you can run the install script for the licence server now:
Code:
sudo /home/joebloggs/Desktop/ugnx/ugslicensing/ugslicensing_install
11) The startup script to automatically run the licence server when the machine starts needs some attention:
Code:
sudo chmod u+x /etc/init.d/rc.ugs.licensing
sudo update-rc.d rc.ugs.licensing defaults
上次由 shibodong 在 2009-03-19 1:49,总共编辑 1 次。
-
- 帖子: 7
- 注册时间: 2009-03-16 21:16
Re: UG NX6 for Linux已可下载
这个是Windows版的吧?Botaski 写了: 包里MS是标准的安装包。。。
-
- 帖子: 24
- 注册时间: 2008-03-27 21:59
Re: UG NX6 for Linux已可下载
这是LInux版的,可以看下说明书,里面有介绍的,而且安装程序也是Linux 格式的