[问题]hiweed beta3 xgl不成功
-
- 帖子: 406
- 注册时间: 2006-03-21 10:47
[问题]hiweed beta3 xgl不成功
我的显卡是gf3ti 硬改 quadro dcc ,nvidia驱动也安装了的,登录时,在会话中选xfce4 xgl 然后填写登录名和密码登录,可是不断重复这个登录过程,就是进不了系统。怎么解决???
还有一个问题:我的移动硬盘,在ubuntu系统中默认是可以读写的,但在hiweed中默认只读;还有.gz文件双击不能打开,说没有默认打开的程序,这个也要改一下。还有,不知道怎么混音,以前在ubuntu中可以一边开bmp一边开mplayer的,现在不知道怎么设置。
暂时这么多。
还有一个问题:我的移动硬盘,在ubuntu系统中默认是可以读写的,但在hiweed中默认只读;还有.gz文件双击不能打开,说没有默认打开的程序,这个也要改一下。还有,不知道怎么混音,以前在ubuntu中可以一边开bmp一边开mplayer的,现在不知道怎么设置。
暂时这么多。
- huangjiahua
- 帖子: 3294
- 注册时间: 2005-03-30 0:27
- 联系:
谢谢
1.
Xgl 应该还是 驱动安装问题, beta4 有一些修正。
2.
你的移动硬盘是什么文件系统格式呀
3.
哦, 没有完全把 xfce4.4 backport 过来, thunar-archive-plugin 的问题
4.
看是你的声卡不支持硬件混音,
加上软件混音了
谢谢
Xgl 应该还是 驱动安装问题, beta4 有一些修正。
2.
你的移动硬盘是什么文件系统格式呀
3.
哦, 没有完全把 xfce4.4 backport 过来, thunar-archive-plugin 的问题
4.
看是你的声卡不支持硬件混音,
加上软件混音了
谢谢
跃过无数的时间断层,只为了在
-
- 帖子: 406
- 注册时间: 2006-03-21 10:47
- huangjiahua
- 帖子: 3294
- 注册时间: 2005-03-30 0:27
- 联系:
关于 nvidia 驱动
能不能麻烦你贴一些 glxinfo 命令的前几行输出
比如我这儿的是
主要是这有没有这个
direct rendering: Yes
另外, 再贴一下 lspci 命令的输出好嘛
谢谢
得先解决掉这些问题, 才能放 正式版她出来~
比如我这儿的是
代码: 全选
hua@vgh:~$ glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
direct rendering: Yes
另外, 再贴一下 lspci 命令的输出好嘛
谢谢
得先解决掉这些问题, 才能放 正式版她出来~
跃过无数的时间断层,只为了在
-
- 帖子: 406
- 注册时间: 2006-03-21 10:47
libohui@libohui:~$ glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
libohui@libohui:~$ lspci
0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1)
0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
0000:01:08.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U
0000:01:09.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]
0000:02:00.0 VGA compatible controller: nVidia Corporation NV20DCC [Quadro DCC] (rev a3)
我这里direct rendering: no,问题是不是就出在这里?我查查看是什么问题。
混音的问题解决了,有一个软件原来是用oss的,改为alsa就可以混音了。
谢谢了。
name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
libohui@libohui:~$ lspci
0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1)
0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
0000:01:08.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U
0000:01:09.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]
0000:02:00.0 VGA compatible controller: nVidia Corporation NV20DCC [Quadro DCC] (rev a3)
我这里direct rendering: no,问题是不是就出在这里?我查查看是什么问题。
混音的问题解决了,有一个软件原来是用oss的,改为alsa就可以混音了。
谢谢了。
-
- 帖子: 406
- 注册时间: 2006-03-21 10:47
- huangjiahua
- 帖子: 3294
- 注册时间: 2005-03-30 0:27
- 联系:
谢谢试用 :)
Xgl 里是不能用 direct rendering 的, 不过你的 Xgl 里 glxgears 帖数更高有些奇怪 。
如果再装上 alsa-oss , 那 用 oss 也可以混音了。
新的 xfce4.4 的包已经放进 ubuntu-cn 的源, 升级下应该可以处理压缩文件了。
beta4 重新设了 Xgl 下的 dpi , Xgl 下字体大小应该没问题了。
添加 CUP 占有率查看 可以 右键点击 面板, 添加项目,CPU监视。
这个任务管理器是 xfce 自带的, 比较简陋,不过比 gnome 的任务管理器快一些。
beta4 估计明天或后天可以下载了 ( 同步到各个 mirrors 需要点时间)
Xgl 里是不能用 direct rendering 的, 不过你的 Xgl 里 glxgears 帖数更高有些奇怪 。
如果再装上 alsa-oss , 那 用 oss 也可以混音了。
新的 xfce4.4 的包已经放进 ubuntu-cn 的源, 升级下应该可以处理压缩文件了。
beta4 重新设了 Xgl 下的 dpi , Xgl 下字体大小应该没问题了。
添加 CUP 占有率查看 可以 右键点击 面板, 添加项目,CPU监视。
这个任务管理器是 xfce 自带的, 比较简陋,不过比 gnome 的任务管理器快一些。
beta4 估计明天或后天可以下载了 ( 同步到各个 mirrors 需要点时间)
跃过无数的时间断层,只为了在
-
- 帖子: 406
- 注册时间: 2006-03-21 10:47
- huangjiahua
- 帖子: 3294
- 注册时间: 2005-03-30 0:27
- 联系: