显卡驱动已安装 版本为173.14.16 但分辨率最大只有640*480 Nvidia X Setting-Xserver Display setting configuration-Display modle为CRT0(CRT0 on GPUo) 桌面特效能打开 按论坛方法尝试过很多命令 也还是没搞定 我的应用程序-其他里面也没有显卡和显示器选项 不知道少装了什么
下面是我的xorg.conf
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
请教9.04 nv5200分辨率问题
-
- 帖子: 4
- 注册时间: 2009-04-28 12:56
- 20sanguo
- 帖子: 794
- 注册时间: 2008-05-10 9:53
Re: 请教9.04 nv5200分辨率问题
我也出现这种问题,是这样解决的:
先在终端执行sudo nvidia-xconfig
Device里出现nvidia。如果还是只有640x480
那就再改xorg.conf
Section "Monitor"
Identifier "Configured Monitor"
Vendorname "Generic LCD Display"
Modelname "LCD Panel 1024x768"
Horizsync 31.5-48.0
Vertrefresh 56.0 - 65.0
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
Gamma 1.0
#Option "DPMS" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Configured Monitor"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Virtual 1024 768
Modes "1024x768_60" "800x600" "640x480"
EndSubSection
EndSection
先在终端执行sudo nvidia-xconfig
Device里出现nvidia。如果还是只有640x480
那就再改xorg.conf
Section "Monitor"
Identifier "Configured Monitor"
Vendorname "Generic LCD Display"
Modelname "LCD Panel 1024x768"
Horizsync 31.5-48.0
Vertrefresh 56.0 - 65.0
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
Gamma 1.0
#Option "DPMS" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Configured Monitor"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Virtual 1024 768
Modes "1024x768_60" "800x600" "640x480"
EndSubSection
EndSection
-
- 帖子: 4
- 注册时间: 2009-04-28 12:56
Re: 请教9.04 nv5200分辨率问题
谢谢您的解答 可是我的显示器不是平板的 我的是CRT的老显示器 所以上面的参数好像并不适合我
sudo nvidia-xconfig 我运行了 但是device还是以前的 整个xorg.conf也没变化
sudo nvidia-xconfig 我运行了 但是device还是以前的 整个xorg.conf也没变化
- 20sanguo
- 帖子: 794
- 注册时间: 2008-05-10 9:53
Re: 请教9.04 nv5200分辨率问题
这就奇怪了sudo nvidia-xconfig应该会改xorg.conf文件。贴个我以前的备份,看看行不行。分辨率、刷新率改成你的。
Section "Monitor"
Identifier "Configured Monitor"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Gamma 1.0
EndSection
Section "Screen"
Identifier "Configured Screen Device"
Monitor "Configured Monitor"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Virtual 1024 768
Modes "1024x768_60" "800x600" "640x480"
EndSubSection
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "nvidia"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Gamma 1.0
EndSection
Section "Screen"
Identifier "Configured Screen Device"
Monitor "Configured Monitor"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Virtual 1024 768
Modes "1024x768_60" "800x600" "640x480"
EndSubSection
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "nvidia"
EndSection
-
- 帖子: 4
- 注册时间: 2009-04-28 12:56
Re: 请教9.04 nv5200分辨率问题
算是基本解决吧 哈哈 谢谢 我卸载了显卡驱动 然后按照你的那个xorg.conf 修改了一下我的 现在已经分辨率正常了 哈哈 谢谢 改天试一下再把驱动装上看看20sanguo 写了:这就奇怪了sudo nvidia-xconfig应该会改xorg.conf文件。贴个我以前的备份,看看行不行。分辨率、刷新率改成你的。
Section "Monitor"
Identifier "Configured Monitor"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Gamma 1.0
EndSection
Section "Screen"
Identifier "Configured Screen Device"
Monitor "Configured Monitor"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Virtual 1024 768
Modes "1024x768_60" "800x600" "640x480"
EndSubSection
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "nvidia"
EndSection
-
- 帖子: 4
- 注册时间: 2009-04-28 12:56
Re: 请教9.04 nv5200分辨率问题
驱动安装后一切正常 现在已经能开启桌面特效了 哈哈
- wangdu2002
- 帖子: 13284
- 注册时间: 2008-12-13 19:39
- 来自: 物华天宝人杰地灵
-
- 帖子: 16
- 注册时间: 2009-05-23 15:01
Re: 请教9.04 nv5200分辨率问题
大侠,只改到1024*768阿,再往上还能改不?参数是怎么定义的