请教一下，为什么登录窗口分辨率和进入后的桌面分辨率不一致？

[xld2000]

我使用的nForce2集成显卡，安装nvidia的驱动后，登录界面的分辨率正确了，为1680x1050,但是登录后，桌面的分辨率一直为800x600,用sudo nvidia-settings更改设置，保存配置后也无效，每次都要手工修改分辨率。

请教大虾们，怎么解决啊？

好几天了

[wangdu2002]

楼主重复发贴，好似leaman又给了复了。Nv的集成显卡，被我禁用了，另搞了一块独立显卡。

[xld2000]

那个答复没解决问题啊
急了

[AngelMAX]

修改xorg.conf看看，我的是ATI的卡，分辨率也有问题，但是改了后就行了。

另，系统为8.10

[xld2000]

我的配置xorg.conf配置文件，刚刚试过配置

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Sun Feb 1 20:21:04 UTC 2009

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder57) Sat Jan 24 20:04:42 PST 2009
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection

Section "Module"
Load "glx"
EndSection

Section "ServerFlags"
Option "Xinerama" "0"
EndSection

Section "InputDevice"

# generated from default
Identifier "Keyboard0"
Driver "keyboard"
EndSection

Section "InputDevice"

# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Acer AL2216W"
HorizSync 31.0 - 84.0
VertRefresh 56.0 - 77.0
EndSection

Section "Device"
Identifier "Configured Video Device"
Driver "nvidia"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce4 MX Integrated GPU"
EndSection

#Section "Screen"
# Identifier "Default Screen"
# Device "Configured Video Device"
# Monitor "Configured Monitor"
# DefaultDepth 24
# Option "AddARGBGLXVisuals" "True"
# Option "NoLogo" "True"
# SubSection "Display"
# Depth 24
# Modes "nvidia-auto-select"
# EndSubSection
#EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "CRT: 1680x1050 +0+0; CRT: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection