手头有一台Netbook,HDD只是一张2GB的CF卡,所以用Alternate方式装了基本系统,然后装了LXDE,这样还有大概500MB的空间。
可是,发现在LXDE下,firefox在显示某些网页时的效果和GNOME下不同,主要是字体变大,这样的网页比较少,这个问题算是小问题,有兴趣的朋友可以试一下,文泉驿的首页,在LXDE和GNOME下显示的字体大小就不同,而转到论坛,字体就相同。
另外一个问题就是,在LXDE下,firefox滚动网页的时候,总是不够平滑,感觉一卡一卡的,不知道怎么形容。
但是,同一台机器,有一个Canonical(Ubuntu母公司)提供的专用系统,代号Chelsea,是GNOME的,在这个平台下面,firfox浏览网页的滚动就是平滑的。
有没有高手知道这是怎么一回事?
Ubuntu平滑滚动问题
- alpha.gu
- 帖子: 1456
- 注册时间: 2006-09-10 16:06
- 联系:
- wangdu2002
- 帖子: 13284
- 注册时间: 2008-12-13 19:39
- 来自: 物华天宝人杰地灵
- li_likun
- 帖子: 43
- 注册时间: 2007-10-31 15:35
Re: Ubuntu平滑滚动问题
显卡驱动未装好
- alpha.gu
- 帖子: 1456
- 注册时间: 2006-09-10 16:06
- 联系:
Re: Ubuntu平滑滚动问题
我猜也是这个问题,但是,同样的机器,装定制过的Ubuntu(Chelsea),情况是OK的,看起来我要重新使用xorg.conf来指定驱动了。
- alpha.gu
- 帖子: 1456
- 注册时间: 2006-09-10 16:06
- 联系:
Re: Ubuntu平滑滚动问题
把Chelsea上面的xorg.conf拷贝过来,结果还是一样,真是找不到问题出在哪里,慢慢找吧,还好卡的不严重。
- alpha.gu
- 帖子: 1456
- 注册时间: 2006-09-10 16:06
- 联系:
Re: Ubuntu平滑滚动问题
查看了一下Chelsea的相关文档,这个系统是基于Ubuntu 8.04.2的,并且加入了Poulsbo(Intel搭配Atom凌动CPU的平台)的VGA驱动,这样看起来是没有办法解决了,因为源里面应该还没有Poulsbo的驱动吧。
如果我从Chelsea系统上面拷贝驱动的话,可行吗?要怎么做?
下面是Chelsea上的xorg.conf的内容:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
Option "VertEdgeScroll" "0"
Option "VertTwoFingerScroll" "1"
Option "HorizTwoFingerScroll" "1"
EndSection
Section "Device"
Identifier "Configured Video Device"
Option "UseFBDev" "true"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "ServerFlags"
Option "BlankTime" "0"
Option "StandbyTime" "0"
Option "SuspendTime" "0"
Option "OffTime" "0"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
如果我从Chelsea系统上面拷贝驱动的话,可行吗?要怎么做?
下面是Chelsea上的xorg.conf的内容:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
Option "VertEdgeScroll" "0"
Option "VertTwoFingerScroll" "1"
Option "HorizTwoFingerScroll" "1"
EndSection
Section "Device"
Identifier "Configured Video Device"
Option "UseFBDev" "true"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "ServerFlags"
Option "BlankTime" "0"
Option "StandbyTime" "0"
Option "SuspendTime" "0"
Option "OffTime" "0"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection