ubuntu904装显卡驱动后出问题，求助（已自己解决）

[lkr19891118]

小弟刚接触UNBUNTU不久，昨天上官方下载了RUN格式驱动，禁止了自带驱动，STOP了GDM，然后才装，安装成功，但是分辨率自动设置不正常，编辑XORG.CONF里面没有MODES这一项，手工加入也没用，重启就说配置错误又会把自己加入的MODES删除。无奈备份安装后的CONF并还原了以前的XORG.CONF，并且首选项里的NVIDIA X SERVER SETTINGS说我用的不是N卡……以下是安装驱动以后的XORG.CONF，求高手分析改哪里可以回到正常分辨率，多谢啦

代码： 全选

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder63)  Wed May 27 03:15:36 PDT 2009


Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "HW191A"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"

EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
    Depth       24
 EndSubSection
EndSection

[lkr19891118]

自己搞定了，可能是旧驱动没删干净，刚才自己把KERNEL里的DRIVER/VIDEO里关于NVIDIA全删了，再装搞定

[yy346956299]

我也碰到和你一样的问题 但是还是没有解决
lz 怎么到kernel里删除nvidia旧驱动啊？？

[tioner]

我的驱动还没装呢。