装在u盘上的系统,如何能在a卡,n卡两台电脑之间都能使用。
-
- 帖子: 30
- 注册时间: 2009-07-17 3:04
装在u盘上的系统,如何能在a卡,n卡两台电脑之间都能使用。
将Ubuntu装在里u盘上,打算作为移动系统使用,可是单位的机子是n卡,而家里的机子是a卡,笔记本是n卡,我是在家里机子上装的系统,可是在单位地机子上黑屏死机,如何解决,一个系统里可以安装两个不同体系的驱动吗?
- missing
- 帖子: 1470
- 注册时间: 2008-03-28 20:52
- 系统: QNX
- jarryson
- 帖子: 4002
- 注册时间: 2005-08-14 19:53
Re: 装在u盘上的系统,如何能在a卡,n卡两台电脑之间都能使用。
也不是没有办法,比较麻烦而已。自动检测硬件,然后自动替换驱动。
如果都是使用开源驱动就简单非常多,本身自动检测。推荐都使用开源驱动
如果都是使用开源驱动就简单非常多,本身自动检测。推荐都使用开源驱动
-
- 帖子: 30
- 注册时间: 2009-07-17 3:04
Re: 装在u盘上的系统,如何能在a卡,n卡两台电脑之间都能使用。
我是菜鸟,能不能说得详细点,如何操作?我现在装的是ati网站上下来的一个88M的驱动,不知道是不是开源的。jarryson 写了:也不是没有办法,比较麻烦而已。自动检测硬件,然后自动替换驱动。
如果都是使用开源驱动就简单非常多,本身自动检测。推荐都使用开源驱动
- cnkilior
- 论坛版主
- 帖子: 4984
- 注册时间: 2007-08-05 17:40
Re: 装在u盘上的系统,如何能在a卡,n卡两台电脑之间都能使用。
不要启用显卡驱动就可以了。
- yaska
- 帖子: 1169
- 注册时间: 2007-10-28 21:35
Re: 装在u盘上的系统,如何能在a卡,n卡两台电脑之间都能使用。
这样装ubuntu 到u盘当然不行了。。
用 vesa 驱动可以,但是刷新频率不能调。
很多 liveusb 都可以自动检测显卡的。
看我的签名。
用 vesa 驱动可以,但是刷新频率不能调。
很多 liveusb 都可以自动检测显卡的。
看我的签名。
-
- 帖子: 30
- 注册时间: 2009-07-17 3:04
Re: 装在u盘上的系统,如何能在a卡,n卡两台电脑之间都能使用。
现在我是在n卡的机子上就黑屏或者花屏,有没有什么办法,能把驱动暂时卸下来。
-
- 帖子: 41
- 注册时间: 2008-08-05 9:29
Re: 装在u盘上的系统,如何能在a卡,n卡两台电脑之间都能使用。
我是这样用的
我有三台电脑 班上的是nvidia quardx700专业显卡
家里是台式机ati hd2600pro 笔记本atix1300
也是8gU盘的系统,直接用envyng来安装驱动就可以了,没有问题 桌面特效可以打开
我有三台电脑 班上的是nvidia quardx700专业显卡
家里是台式机ati hd2600pro 笔记本atix1300
也是8gU盘的系统,直接用envyng来安装驱动就可以了,没有问题 桌面特效可以打开
- pityonline
- 帖子: 3864
- 注册时间: 2008-12-09 12:44
- 来自: 北京
- 联系:
Re: 装在u盘上的系统,如何能在a卡,n卡两台电脑之间都能使用。
我没电脑,所以常用移动硬盘系统蹭别人电脑用,现在eth已经到6了,起码蹭过七台电脑了,不管A卡还是N卡,或是集显的卡,记得关机前一定把特效关掉,换另一台电脑时有必要fix X一下,基本没什么问题。
-
- 帖子: 30
- 注册时间: 2009-07-17 3:04
Re: 装在u盘上的系统,如何能在a卡,n卡两台电脑之间都能使用。
关键是我现在在n卡的机子上就近不了系统,开机停留在花屏状态下。我昨天试着将xorg.conf文件中的ati改成vesa,差点给系统弄费了,连a卡的机子都花屏了。幸亏有xorg.conf的备份,在命令行状态下又拷贝回来。而a卡状态下ENvyNG装不了n卡的驱动,真是愁死我了。及时雨天 写了:我是这样用的
我有三台电脑 班上的是nvidia quardx700专业显卡
家里是台式机ati hd2600pro 笔记本atix1300
也是8gU盘的系统,直接用envyng来安装驱动就可以了,没有问题 桌面特效可以打开
-
- 帖子: 30
- 注册时间: 2009-07-17 3:04
Re: 装在u盘上的系统,如何能在a卡,n卡两台电脑之间都能使用。
我的xorg.conf,昨天我把driver后的ati还成了 vesa,差一点把系统弄废了,连A卡开机都花屏。
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
- grahamgan
- 帖子: 194
- 注册时间: 2008-09-07 14:47
Re: 装在u盘上的系统,如何能在a卡,n卡两台电脑之间都能使用。
帮顶,同问……
只不过不一样的是我的移动硬盘是接在笔记本上装的,笔记本是Nvidia Quadro NVS 135M,公司的台式机是Nvidia 7300GT,家里的电脑是ATI X800。
只不过不一样的是我的移动硬盘是接在笔记本上装的,笔记本是Nvidia Quadro NVS 135M,公司的台式机是Nvidia 7300GT,家里的电脑是ATI X800。
-
- 帖子: 41
- 注册时间: 2008-08-05 9:29
Re: 装在u盘上的系统,如何能在a卡,n卡两台电脑之间都能使用。
liumiao 写了:关键是我现在在n卡的机子上就近不了系统,开机停留在花屏状态下。我昨天试着将xorg.conf文件中的ati改成vesa,差点给系统弄费了,连a卡的机子都花屏了。幸亏有xorg.conf的备份,在命令行状态下又拷贝回来。而a卡状态下ENvyNG装不了n卡的驱动,真是愁死我了。及时雨天 写了:我是这样用的
我有三台电脑 班上的是nvidia quardx700专业显卡
家里是台式机ati hd2600pro 笔记本atix1300
也是8gU盘的系统,直接用envyng来安装驱动就可以了,没有问题 桌面特效可以打开
如果不用envyng的话,下载官方的驱动,再把新立德里的自带ati和nvdia的驱动完全删除,然后退出桌面,在命令行下安装a卡和n卡的官方驱动,具体的可以找找论坛
我这样也干过,也可以运行,u盘上用过的显卡有nv fx5200 mx440 ,由于我在单位机房,用这个u盘试了非常多a卡和n卡的联想,同方,hp的电脑都没有问题,可以启动特效。
-
- 帖子: 30
- 注册时间: 2009-07-17 3:04
Re: 装在u盘上的系统,如何能在a卡,n卡两台电脑之间都能使用。
今天实验小成,上来念叨一下
卸载原驱动,造成我无法在n卡机子上使用系统的罪魁祸首是,装完系统后我曾安装了ati最新的官方受限驱动,今年6月份才出的,a卡下非常好用,但是n卡下死机,而且官方驱动在“新立德”下无法卸载。最终我在/usr/share/ati下发现了fglrx-uninstall.sh文件,命令行运行sudo /usr/share/ati/fglrx-uninstall.sh,彻底卸载ati驱动。
用envy安装ati驱动。重启后屏幕分辨率发生了变化,直觉在n卡下应该可以了。在笔记本上实验,终于不再死机,见到了桌面,用envy安装了n卡驱动。
为什么说小成呢。因为我笔记本的显卡是g130M的相对较新,默认驱动无法开启3D,我曾经安装过n卡最新驱动不知道是不是官方受限的,是可以开启3D的。
而我的台式机是24寸显示器默认分辨率是1920*1200的。而默认a卡的驱动最高只能上1600*1200,也无法开启3D,我现在的字是扁扁的,
envy提供的程序相对比较落后。但是可以实现不同显卡之间的显示,好不容易走到这步,我不敢在瞎试了,所以算是小成。
卸载原驱动,造成我无法在n卡机子上使用系统的罪魁祸首是,装完系统后我曾安装了ati最新的官方受限驱动,今年6月份才出的,a卡下非常好用,但是n卡下死机,而且官方驱动在“新立德”下无法卸载。最终我在/usr/share/ati下发现了fglrx-uninstall.sh文件,命令行运行sudo /usr/share/ati/fglrx-uninstall.sh,彻底卸载ati驱动。
用envy安装ati驱动。重启后屏幕分辨率发生了变化,直觉在n卡下应该可以了。在笔记本上实验,终于不再死机,见到了桌面,用envy安装了n卡驱动。
为什么说小成呢。因为我笔记本的显卡是g130M的相对较新,默认驱动无法开启3D,我曾经安装过n卡最新驱动不知道是不是官方受限的,是可以开启3D的。
而我的台式机是24寸显示器默认分辨率是1920*1200的。而默认a卡的驱动最高只能上1600*1200,也无法开启3D,我现在的字是扁扁的,
envy提供的程序相对比较落后。但是可以实现不同显卡之间的显示,好不容易走到这步,我不敢在瞎试了,所以算是小成。
- 卞锦生
- 帖子: 320
- 注册时间: 2008-12-07 19:43
- 系统: ubuntu14.10
- 来自: 江苏盐城亭湖区
- 联系: