已经用
sudo sh ati9.8.run
在菜单里点击 ATICCC 和ATICCC(superuser)都没有弹出相应的设置窗口 这样算装好了么 应该怎么应用呢?
关于ATI9。8催化 的安装问题
-
- 帖子: 56
- 注册时间: 2008-10-26 19:39
- hcym
- 帖子: 15634
- 注册时间: 2007-05-06 2:46
Re: 关于ATI9。8催化 的安装问题
ubuntu英文官网有最规范的安装方法
你还是按那步骤来吧
你还是按那步骤来吧
-
- 帖子: 56
- 注册时间: 2008-10-26 19:39
Re: 关于ATI9。8催化 的安装问题
英语。。。 楼上的高人能否简单翻译下?
- leeaman
- 帖子: 30702
- 注册时间: 2007-02-02 18:14
- 系统: debian sid
Re: 关于ATI9。8催化 的安装问题
代码: 全选
sudo aticonfig --initial -f
醉了星星,醉月亮●●●●●The Long Way To Go(*^_^*)
-
- 帖子: 7
- 注册时间: 2009-08-20 18:12
Re: 关于ATI9。8催化 的安装问题
本人装好UBUNTU9。04好几天了,被显卡的刷新率整得头晕晕的,我的是ATI3850显卡,用系统的硬件驱动装的话会闪屏,后来用官方的9,8版驱动装好了,可是刷新率最高只能上到60,我的显示器是crt的,没法看。型号为三菱的RDF221S,1280*1024分辨率下刷新率可以上到85的,在论坛到处找帖子,搞了三天了,还没解决,望有朋友可以帮帮忙,多谢了!以下是我的xorg.conf
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
EndSection
Section "ServerFlags"
Option "Xinerama" "off"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
EndSection
Section "ServerFlags"
Option "Xinerama" "off"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
- adagio
- 论坛版主
- 帖子: 22110
- 注册时间: 2008-02-17 23:47
- 来自: 美丽富饶的那啥星球
Re: 关于ATI9。8催化 的安装问题
代码: 全选
Section "Monitor"
Identifier "Configured Monitor"
EndSection
代码: 全选
Section "Device"
Identifier "Configured Video Device"
EndSection
代码: 全选
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
EndSection
明天就换大三八!
——8核CPU、8G内存、8T硬盘……
8卡交火,80寸大屏放8个……
IPv8的光纤要8条……
---------------------------------------------------------------------------------
★ [图片版]新手当自强(续)FAQ
★ [新手进阶]挂载、fstab、调整linux分区
★ [图片版]E17桌面环境配置手把手
——8核CPU、8G内存、8T硬盘……
8卡交火,80寸大屏放8个……
IPv8的光纤要8条……
---------------------------------------------------------------------------------
★ [图片版]新手当自强(续)FAQ
★ [新手进阶]挂载、fstab、调整linux分区
★ [图片版]E17桌面环境配置手把手
-
- 帖子: 7
- 注册时间: 2009-08-20 18:12
Re: 关于ATI9。8催化 的安装问题
谢adagio提点,可把上面的东西删掉后仍然最高刷新率60.不知道怎么办好了,唉,ATI!
上次由 xiaohuang1228 在 2009-08-21 21:01,总共编辑 1 次。
-
- 帖子: 135
- 注册时间: 2009-04-28 21:47
-
- 帖子: 817
- 注册时间: 2008-11-13 16:03
Re: 关于ATI9。8催化 的安装问题
可怜的 ATI