[问题]我安装好了xgl,为什么还是以前的界面?
- nonozone
- 帖子: 134
- 注册时间: 2006-08-06 19:28
- 来自: Quanzhou
- 联系:
[问题]我安装好了xgl,为什么还是以前的界面?
要怎么才可以进入 3D特效呀?
- goldfox_79
- 帖子: 2004
- 注册时间: 2005-10-16 8:26
- 来自: 地球
- nonozone
- 帖子: 134
- 注册时间: 2006-08-06 19:28
- 来自: Quanzhou
- 联系:
- goldfox_79
- 帖子: 2004
- 注册时间: 2005-10-16 8:26
- 来自: 地球
俺是按照这个装的beryl viewtopic.php?t=26309&highlight=beryl
- nonozone
- 帖子: 134
- 注册时间: 2006-08-06 19:28
- 来自: Quanzhou
- 联系:
我也是呀goldfox_79 写了:俺是按照这个装的beryl viewtopic.php?t=26309&highlight=beryl
- goldfox_79
- 帖子: 2004
- 注册时间: 2005-10-16 8:26
- 来自: 地球
- nonozone
- 帖子: 134
- 注册时间: 2006-08-06 19:28
- 来自: Quanzhou
- 联系:
-
- 帖子: 26
- 注册时间: 2006-10-24 16:22
郁闷,我的也出现这个问题。图标已经显示了但是没有效果。
sudo gedit /etc/gdm/gdm.conf-custom,在[servers] 后面加入
0=Xgl
[server-Xgl]
name=Xgl server
command=/usr/bin/Xgl -fullscreen -ac -accel glx:pbuffer -accel xv:fbo
(不行的也可以选用command=/usr/bin/Xgl -fullscreen -br -accel glx:pbuffer -accel xv:fbo)
flexible=true
这一段我没有加,加上去就进不了gnome了
晕死
sudo gedit /etc/gdm/gdm.conf-custom,在[servers] 后面加入
0=Xgl
[server-Xgl]
name=Xgl server
command=/usr/bin/Xgl -fullscreen -ac -accel glx:pbuffer -accel xv:fbo
(不行的也可以选用command=/usr/bin/Xgl -fullscreen -br -accel glx:pbuffer -accel xv:fbo)
flexible=true
这一段我没有加,加上去就进不了gnome了
晕死
-
- 帖子: 5
- 注册时间: 2006-09-25 9:26
- nonozone
- 帖子: 134
- 注册时间: 2006-08-06 19:28
- 来自: Quanzhou
- 联系:
-
- 帖子: 4
- 注册时间: 2006-11-04 19:29
搞定这个问题
我也和大家碰到了同样的问题。同样的按照这个网址所说的安装,同样的有钻石图标没有3D效果,同样的出现了beryl-xgl: No composite extension 的提示。别人都是一次都装好了,为什么我就好事多磨呢?那个郁闷阿。。。奋斗一下午,直接查询英文版的安装手册,终于把问题搞定了。goldfox_79 写了:俺是按照这个装的beryl viewtopic.php?t=26309&highlight=beryl
在那篇文章中有如下文字:
还有sudo gedit /etc/gdm/gdm.conf,找到“0=Standard”,改为“1=Standard”;找到“GdmXserverTimeout=10”,改为“GdmXserverTimeout=50”(词句为可选修改,这么做只是延长timeout时间,增加成功机会,有的机器上用修改这句也行的)。
注意,这只是针对ATI显卡的,不适用于NV显卡。原因很简单,在NV版本的gdm.conf-custom中将0=Xgl,如果在gdm.conf再改1=Standard,岂不是不让xgl启动了?所以会有XGL Absent的提示。
-
- 帖子: 4
- 注册时间: 2006-11-04 19:29
如果直接看英文版的,就很明显了:https://help.ubuntu.com/community/CompositeManager/Xgl
If you have NVIDIA
Add a new [server-Xgl] section and change the [servers] section to look like this:
[servers]
0=Xgl
[server-Xgl]
name=Xgl server
command=/usr/bin/Xgl -fullscreen -br -accel xv:fbo -accel glx:pbuffer
flexible=true
If you have ATI with fglrx drivers
When we use this alternativ we must change standard server to 1
gksudo gedit /etc/gdm/gdm.conf
Find this lines and switch standard server to 1
#0=Standard
1=Standard
Add a new [server-Xgl] section and change the [servers] section to look like this:
[servers]
1=Xgl #Override display 1 to use Xgl (DISPLAY 1 IMPORTANT FOR FGLRX, 0 works on Edgy+FGLRX).
[server-Xgl]
name=Xgl server
command=/usr/bin/Xgl -fullscreen -br -accel xv:pbuffer -accel glx:pbuffer -dpi 100 -nolisten tcp
flexible=true
Else
Add a new [server-Xgl] section and change the [servers] section to look like this:
[servers]
0=Xgl
[server-Xgl]
name=Xgl server
command=/usr/bin/Xgl -fullscreen -br -accel xv:pbuffer -accel glx:pbuffer
flexible=true
If you have NVIDIA
Add a new [server-Xgl] section and change the [servers] section to look like this:
[servers]
0=Xgl
[server-Xgl]
name=Xgl server
command=/usr/bin/Xgl -fullscreen -br -accel xv:fbo -accel glx:pbuffer
flexible=true
If you have ATI with fglrx drivers
When we use this alternativ we must change standard server to 1
gksudo gedit /etc/gdm/gdm.conf
Find this lines and switch standard server to 1
#0=Standard
1=Standard
Add a new [server-Xgl] section and change the [servers] section to look like this:
[servers]
1=Xgl #Override display 1 to use Xgl (DISPLAY 1 IMPORTANT FOR FGLRX, 0 works on Edgy+FGLRX).
[server-Xgl]
name=Xgl server
command=/usr/bin/Xgl -fullscreen -br -accel xv:pbuffer -accel glx:pbuffer -dpi 100 -nolisten tcp
flexible=true
Else
Add a new [server-Xgl] section and change the [servers] section to look like this:
[servers]
0=Xgl
[server-Xgl]
name=Xgl server
command=/usr/bin/Xgl -fullscreen -br -accel xv:pbuffer -accel glx:pbuffer
flexible=true
-
- 帖子: 4
- 注册时间: 2006-11-04 19:29