我的ubuntu搞坏了,哪位大侠可以指导我修复一下

启动讨论 grub/grub2/syslinux/grub4dos/Lilo
回复
xiaoxiaflash
帖子: 12
注册时间: 2009-08-29 21:58

我的ubuntu搞坏了,哪位大侠可以指导我修复一下

#1

帖子 xiaoxiaflash » 2009-08-29 22:20

原本什么都好用的,当我用sudo halt关机后再回来,启动的时候硬盘检测卡住了,大约有1分钟,我不知道是怎么回事,我重启,现了以下问题,
这是我抄下来的全屏提示
[ 15.423659] ata1. 00:BMD MA Stat 0x25
[ 15.423719] ata1. SError: {Dispar}
[ 15.423781] ata1. 00:cmd c8/00:00:17:31:14/00:00:00:00:00/e0 tag 0 dma 13107 in
[ 15.423782] res 51/84:1f:f8:31:14/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
[ 15.423926] ata1.00 error: {1CRCABRT}
/dev/sda1:
Inodes that were part of a corrupted orphan linked list found
/dev/sda1:UNEXPECTED INCONSISTENCY; RUN fsck manually
(i.e., without –a or –p options)
Fsck died with exist status 4
[fail]
* An automatic file system check(fsck) of the root filesystem failed.
A manual fsck must be performed, then the system restarted.
The fsck should be performed in maintenance mode with the root file system mounted in read-only mode.
* The root filesystem maintence, press COUNTROL-D to terminate the maintence shell and restart the system
Give root password for maintence
(or type control-D to continue): //输入密码后
Bash: no job control in this shell
root@ubuntu_717:~#

请大家帮帮我,不胜感激~~~!!
头像
smallapple
论坛版主
帖子: 7868
注册时间: 2009-03-28 15:12

Re: 我的ubuntu搞坏了,哪位大侠可以指导我修复一下

#2

帖子 smallapple » 2009-08-29 22:28

root@ubuntu_717:~#
就在这里输入fsck /dev/sda1
整完了再输入exit
ws860513
帖子: 57
注册时间: 2008-11-25 19:07

Re: 我的ubuntu搞坏了,哪位大侠可以指导我修复一下

#3

帖子 ws860513 » 2009-08-29 22:29

上面说很清楚啊。
你root登录后,不是提示进入系统了吗?
然后RUN fsck manually
(i.e., without –a or –p options)

让你在root下再fsck一次。

别进不到图形界面就认为没有登录成功。

代码: 全选

rm  -rd /
xiaoxiaflash
帖子: 12
注册时间: 2009-08-29 21:58

Re: 我的ubuntu搞坏了,哪位大侠可以指导我修复一下

#4

帖子 xiaoxiaflash » 2009-08-29 22:43

smallapple, smallapple,
谢谢你 ,同时我这台还是一个DHCP服务器,系统提示
starting DHCP server dhcpd3
check syslog for dianoistics. [failed]
我这台机器有两个网卡,DHCP以前就做好了,我试了一下是好用的,现在不知道为什么服务器的DHCP不好使了,请问怎么办?
头像
smallapple
论坛版主
帖子: 7868
注册时间: 2009-03-28 15:12

Re: 我的ubuntu搞坏了,哪位大侠可以指导我修复一下

#5

帖子 smallapple » 2009-08-29 22:50

回复