为何分辨率调不到 ? 重新开机就变回原来的

[dengtion]

搜了几个帖, 都没解决这个问题, 怎么办啊?

[牛奶夹心饼]

说的具体一点嘛。

[dengtion]

说的具体一点嘛。

就是每次开机分辨率都是最大值， 要人工调到1024*768 ， 但关机后下次开机又变回最大值

[wangdu2002]

放狗和搜坛的能力还是不够啊。修改Xorg.conf文件，以下供参考：

Section "Monitor"
Identifier "Configured Monitor"
Vendorname "Generic LCD Display"
Modelname "Monitor 1920x1080"
Horizsync 31.5-60.0
Vertrefresh 50-60
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
modeline "1152x864@60" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
modeline "1680x1050@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
modeline "1920x1080@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
Gamma 1.0
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 1920 1080
Modes "1024×768@60" "1400×1050@60" "1680×1050@60" "1920×1080@60"
EndSubSection
EndSection

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@vernadsky) Thu Jun 5 09:26:53 UTC 2008

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
EndSection

Section "Module"
Load "glx"
EndSection

Section "ServerFlags"
Option "Xinerama" "0"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbOptions" "logo"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "CRT-0"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 150.0
EndSection

Section "Device"
Identifier "Configured Video Device"
Driver "nvidia"
Option "NoLogo" "True"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nv"
VendorName "NVIDIA Corporation"
BoardName "GeForce4 MX 440 with AGP8X"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "nvidia-auto-select +0+0"
EndSection

[白鳍豚]

简单办法。nvidia?用root登录更改或sudo启动更改,然后保存