Nvidia驱动安装上之后，开机时出现failed，这是怎么回事？

[osos]

Dell E6400机子 ＋ fedora 10 x86_64 系统
用yum install kmod-nvidia安装了显卡驱动，开机时出现了Nvidia的logo，可是还是出现这样的错误Enabling the nvidia driver: [Failed]。

下面是boot.log里的信息，帮忙看看问题出在哪里吧，我用百度、谷歌都搜过了，也没有找到解决办法。
linuxsir和linuxeden也找过了：（


Setting up hotplug.

Creating block device nodes.

Creating character device nodes.

Loading pata_acpi module

Loading ata_generic module

Creating root device.

Mounting root filesystem.

Setting up other filesystems.

Switching to new root and running init.

Welcome to Fedora

Press 'I' to enter interactive startup.

Starting udev: %G[ OK ]


Setting hostname QiPengos: [ OK ]


Setting up Logical Volume Management: [ OK ]


Checking filesystems

/: clean, 224547/1281120 files, 2007141/5118702 blocks

/home: clean, 64005/2125760 files, 5518075/8498377 blocks

/boot: clean, 47/26104 files, 31824/104388 blocks

[ OK ]


Remounting root filesystem in read-write mode: [ OK ]


Mounting local filesystems: [ OK ]


Enabling local filesystem quotas: [ OK ]


Enabling /etc/fstab swaps: [ OK ]


Entering non-interactive startup

Applying Intel CPU microcode update: [ OK ]


Checking kmods exist for 2.6.27.30-170.2.82.fc10.x86_64[ OK ]


Enabling ondemand cpu frequency scaling: [ OK ]


ip6tables: Applying firewall rules: [ OK ]


ip6tables: Loading additional modules: nf_conntrack_netbios_ns [ OK ]


iptables: Applying firewall rules: [ OK ]


iptables: Loading additional modules: nf_conntrack_netbios_ns [ OK ]


Checking for module nvidia.ko: [ OK ]



Enabling the nvidia driver: /etc/rc.d/init.d/functions: line 493: 2099 Segmentation fault "$@"

[FAILED]

--------------->为啥失败呢？开机的时候明明可以看到NVidia的logo。

Starting auditd: [ OK ]


Starting portreserve: [ OK ]


Starting system logger: [ OK ]


Starting irqbalance: [ OK ]


Starting rpcbind: [ OK ]


Starting NFS statd: [ OK ]


Starting RPC idmapd: [ OK ]


Starting system message bus: [ OK ]


Starting acpi daemon: [ OK ]


Starting HAL daemon: [ OK ]


Starting PC/SC smart card daemon (pcscd): [ OK ]


Setting network parameters... [ OK ]


Starting NetworkManager daemon: [ OK ]


Starting setroubleshootd: [ OK ]


Starting Bluetooth services:[ OK ]


Starting console mouse services: [ OK ]


Starting crond: [ OK ]
[ OK ]


Starting kerneloops:[ OK ]


Enabling monthly Smolt checkin: [ OK ]


Starting atd: [ OK ]
[ OK ]


Starting Avahi daemon... [ OK ]


Starting cups: [ OK ]


Starting anacron: [ OK ]


这里再附上/etc/X11/xorg.conf的内容吧：

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder62) Mon May 11 15:58:00 PDT 2009

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Fri Apr 17 00:40:10 PDT 2009
# Xorg configuration created by livna-config-display

Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection

Section "Files"
ModulePath "/usr/lib64/xorg/modules"
EndSection

Section "ServerFlags"
Option "AIGLX" "on"
Option "Xinerama" "0"
EndSection

Section "InputDevice"

# generated from data in "/etc/sysconfig/keyboard"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbLayout" "us"
Option "XkbModel" "pc105"
EndSection

Section "InputDevice"

# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Seiko"
HorizSync 37.3 - 55.9
VertRefresh 40.0 - 60.0
Option "DPMS"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "Quadro NVS 160M"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Videocard0"
Monitor "Monitor0"
SubSection "Display"
Modes "nvidia-auto-select"
EndSubSection
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "1440x900_60 +0+0; nvidia-auto-select +0+0; 1024x768 +0+0; 800x600 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection


谢谢了！

[pro_]

顶一下。你的驱动装好了吗？我邮箱high_point@163.com 我的也是这个问题。。怎么解决。。。