sudo dpkg-reconfigure xserver-xorg没反应,不知道怎么回事?
-
- 帖子: 27
- 注册时间: 2005-04-17 17:39
sudo dpkg-reconfigure xserver-xorg没反应,不知道怎么回事?
sudo dpkg-reconfigure xserver-xorg没反应,不知道怎么回事?而且用envyng安装ati的驱动也不成功,我的显卡是ati firemv2400的。
- renxinzhi
- 帖子: 970
- 注册时间: 2007-11-02 13:46
- leeaman
- 帖子: 30702
- 注册时间: 2007-02-02 18:14
- 系统: debian sid
Re: sudo dpkg-reconfigure xserver-xorg没反应,不知道怎么回事?
这个命令没有用了,lz你的显卡似乎不用装驱动了吧?
醉了星星,醉月亮●●●●●The Long Way To Go(*^_^*)
-
- 帖子: 27
- 注册时间: 2005-04-17 17:39
Re: sudo dpkg-reconfigure xserver-xorg没反应,不知道怎么回事?
可是,我用系统提供开源驱动也没有用,在硬件驱动里面根本就没有驱动可选,下载官方的驱动安装了以后还是没有用,现在我都不知道怎么办了,我的显卡是ati的firemv 2400,哪位大侠能够帮帮忙。
-
- 帖子: 27
- 注册时间: 2005-04-17 17:39
Re: sudo dpkg-reconfigure xserver-xorg没反应,不知道怎么回事?
我的xorg.conf文件是这样的:
Section "Module"
Load "dri"
Load "GLcore"
EndSection
Section "Device"
Identifier "Default Device"
Driver "vesa"
EndSection
是不是说明显卡没有装上?
Section "Module"
Load "dri"
Load "GLcore"
EndSection
Section "Device"
Identifier "Default Device"
Driver "vesa"
EndSection
是不是说明显卡没有装上?
- wangdu2002
- 帖子: 13284
- 注册时间: 2008-12-13 19:39
- 来自: 物华天宝人杰地灵
Re: sudo dpkg-reconfigure xserver-xorg没反应,不知道怎么回事?
现在用的是通用驱动,换ati试试。Driver "vesa"
行到水穷处,坐看云起时。
海内生明月,天涯共此夕。
--------------------吾本独!
海内生明月,天涯共此夕。
--------------------吾本独!
-
- 帖子: 27
- 注册时间: 2005-04-17 17:39
Re: sudo dpkg-reconfigure xserver-xorg没反应,不知道怎么回事?
我用envyng安装了最新的ati驱动(8.66)后,进入不了图形界面,xorg.conf文件是这样的:
Section "Screen"
Identifier "Default Screen"
DefaultDepth 24
EndSection
Section "Module"
Load "glx"
Disable "dri2"
EndSection
Section "Device"
Identifier "Default Device"
Driver "fglrx"
EndSection
之后我把Driver “fglrx”改为Driver “ati”后可以进入图形界面,但是启用不了3D效果,fglrxinfo的结果是:
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 152 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 16
Current serial number in output stream: 16
不知道是什么个意思,问一下各位大侠这么解决。
Section "Screen"
Identifier "Default Screen"
DefaultDepth 24
EndSection
Section "Module"
Load "glx"
Disable "dri2"
EndSection
Section "Device"
Identifier "Default Device"
Driver "fglrx"
EndSection
之后我把Driver “fglrx”改为Driver “ati”后可以进入图形界面,但是启用不了3D效果,fglrxinfo的结果是:
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 152 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 16
Current serial number in output stream: 16
不知道是什么个意思,问一下各位大侠这么解决。