我有一台IBM R30的笔记本,P3 1G,512M的内存,140G的硬盘,Trident显卡,原来安装的是xp。最近听说Ubuntu不错,对机器要求不高,所以就下载了9.04版本的按照论坛上方法安装。出现如下问题:
1、安装时间很长大约50分钟,比安装xp还慢;
2、中文支持的不好,下载更新后还是有些地方不是中文显示
3、最大的问题就是显示不正常,笔记本的最佳分辨率为1024X768,但是系统最高只有800X600,而且更重要的是不能满屏显示。能显示的只是屏幕中间 一块区域,其他地方都是黑的。这就太不好了,跪求高人解决!或者这款老爷车本本,推荐安装其他什么版本最好,谢谢了!
IBM笔记本安装Ubuntu 9.04的问题
版面规则
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
-
- 帖子: 7
- 注册时间: 2008-01-30 23:05
- xixinjie
- 帖子: 163
- 注册时间: 2008-02-10 15:32
Re: IBM笔记本安装Ubuntu 9.04的问题
问题1的话估计你安装XP都是ghost的!呵呵 ubuntu 配置好之后的确不错,配置的话参照第2条!
问题2可以参照
http://wiki.ubuntu.org.cn/index.php?tit ... iant=zh-cn
问题3的话看看其他人怎么解决的!活用论坛搜索!
PS:不用重复发贴的! 加油
问题2可以参照
http://wiki.ubuntu.org.cn/index.php?tit ... iant=zh-cn
问题3的话看看其他人怎么解决的!活用论坛搜索!
PS:不用重复发贴的! 加油
上次由 xixinjie 在 2009-10-28 14:32,总共编辑 1 次。
-
- 帖子: 7
- 注册时间: 2008-01-30 23:05
Re: IBM笔记本安装Ubuntu 9.04的问题
这款笔记本的显卡是Trident Video Accelerator CyberBlade-Ai1 AGP的,在网上好像找不到Linux的驱动,只有一个Trident Blade 3D 的Linux的驱动,能用这个不?
- xixinjie
- 帖子: 163
- 注册时间: 2008-02-10 15:32
Re: IBM笔记本安装Ubuntu 9.04的问题
没有受限驱动?zbyleo 写了:这款笔记本的显卡是Trident Video Accelerator CyberBlade-Ai1 AGP的,在网上好像找不到Linux的驱动,只有一个Trident Blade 3D 的Linux的驱动,能用这个不?
-
- 帖子: 6
- 注册时间: 2009-04-18 11:45
Re: IBM笔记本安装Ubuntu 9.04的问题
引用自:http://andyfan.blog.sohu.com/106671236.html
xorg.conf编辑完保存,退出后再重新登录就OK了。
Section "Device"
Identifier "Configured Video Device"
Boardname "Trident CyberBlade (generic)"
Busid "PCI:1:0:0"
Driver "trident"
Screen 0
Vendorname "Trident"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
Vendorname "Generic LCD Display"
Modelname "LCD Panel 1024x768"
Horizsync 31.5-48.0
Vertrefresh 56.0 - 65.0
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
Gamma 1.0
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
SubSection "Display"
Depth 24
Modes "1024x768" "800x600"
EndSubSection
EndSection
xorg.conf编辑完保存,退出后再重新登录就OK了。
Section "Device"
Identifier "Configured Video Device"
Boardname "Trident CyberBlade (generic)"
Busid "PCI:1:0:0"
Driver "trident"
Screen 0
Vendorname "Trident"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
Vendorname "Generic LCD Display"
Modelname "LCD Panel 1024x768"
Horizsync 31.5-48.0
Vertrefresh 56.0 - 65.0
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
Gamma 1.0
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
SubSection "Display"
Depth 24
Modes "1024x768" "800x600"
EndSubSection
EndSection
-
- 帖子: 279
- 注册时间: 2007-03-31 12:56
Re: IBM笔记本安装Ubuntu 9.04的问题
现在的ubuntu应该对硬件的支持很不错了。
-
- 帖子: 27
- 注册时间: 2013-07-01 9:09
- 系统: Xubuntu7.04
Re: IBM笔记本安装Ubuntu 9.04的问题
修改后无法保存是怎么回事,请指教?steven0127 写了:引用自:http://andyfan.blog.sohu.com/106671236.html
xorg.conf编辑完保存,退出后再重新登录就OK了。
Section "Device"
Identifier "Configured Video Device"
Boardname "Trident CyberBlade (generic)"
Busid "PCI:1:0:0"
Driver "trident"
Screen 0
Vendorname "Trident"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
Vendorname "Generic LCD Display"
Modelname "LCD Panel 1024x768"
Horizsync 31.5-48.0
Vertrefresh 56.0 - 65.0
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
Gamma 1.0
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
SubSection "Display"
Depth 24
Modes "1024x768" "800x600"
EndSubSection
EndSection