[SOS]刷新率只显示0HZ!!!!

CPU/显卡/打印机/USB设备等硬件问题
回复
头像
walkonoppson
帖子: 19
注册时间: 2009-02-14 15:12

[SOS]刷新率只显示0HZ!!!!

#1

帖子 walkonoppson » 2009-03-01 23:40

我的电脑也出问题了,但问题又和在论坛上找到的情况的不一样,所以开一新帖,请大伙帮帮忙:

我的刷新率只显示:0HZ,我现在还郁闷呢!每当我的分辨率从默认的1280*1024调成1024*768时就会导致颜色质量出问题。

之前只是想更新一下ati的显卡驱动,但找了老半天没找着ubuntu9.04的驱动,我的显卡是hd2600的~在安装显卡出错后,我再xie载,重启后就出上述问题了~
然后再想办法整回原状,参考了网上的方法改了x11下的xorg.conf:

代码: 全选

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Device"
	Identifier	"Configured Video Device"
EndSection

Section "Monitor"
	Identifier	"Configured Monitor"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Monitor		"Configured Monitor"
	Device		"Configured Video Device"
	DefaultDepth                 24
	SubSection    "Display"
	Depth                         24
	Modes             "1024×768" "800×600" "640×480"
	EndSubSection
EndSection
但还是不成功,现在只能在1280*1024的分辨率下显示质量为正常的,但刷新仍旧显示为 0HZ

:em06 小弟不才,望大虾批评指点!对了,我的显示器的17寸的!优派E72f+
夜空中的精灵,请为我祈祷!
头像
walkonoppson
帖子: 19
注册时间: 2009-02-14 15:12

Re: [SOS]刷新率只显示0HZ!!!!

#2

帖子 walkonoppson » 2009-03-02 0:17

我再改了下xorg.conf,为:

代码: 全选

Section "Device"
	Identifier	"Configured Video Device"
EndSection

Section "Monitor"
	Identifier	"Configured Monitor"
	HorizSync 30-70
	VertRefresh 75-85
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Monitor		"Configured Monitor"
	Device		"Configured Video Device"
	DefaultDepth                 24
	SubSection    "Display"
	Depth                         24
	Modes             "1024×768" "800×600" "640×480"
	EndSubSection
EndSection
情况有些好转了,分辨率显示为1152*864,刷新还是显示为0HZ,但效果上有75左右了!
显卡驱动还是没装上~
明天接着整,各位晚安~ :em11
附件
Screenshot-Display Settings.png
夜空中的精灵,请为我祈祷!
头像
kelen
帖子: 734
注册时间: 2008-05-02 19:50

Re: [SOS]刷新率只显示0HZ!!!!

#3

帖子 kelen » 2009-03-03 0:07

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
In a world without walls who needs Windows?
ylxi123
帖子: 122
注册时间: 2008-08-02 13:01

Re: [SOS]刷新率只显示0HZ!!!!

#4

帖子 ylxi123 » 2009-03-21 18:54

楼主用的是u904吗,我也是啊
我的更不妙
只有60HZ,你的问题解决了吗?
头像
walkonoppson
帖子: 19
注册时间: 2009-02-14 15:12

Re: [SOS]刷新率只显示0HZ!!!!

#5

帖子 walkonoppson » 2009-10-29 0:18

:em06 问题没有解决呢,事隔多月,我转向Win7了。。。
现在等待9.10.。。。。。。。。。。
夜空中的精灵,请为我祈祷!
回复