升级到9.10后mplayer与smplayer的Vdpau的问题

[coolfrog]

9.04的时候使用ubuntu tweak里带的mplayer及smplayer的9.04源安装mplayer及smplayer都带有vdpau支持
deb http://ppa.launchpad.net/rvm/mplayer/ubuntu Jaunty main
deb http://ppa.launchpad.net/rvm/smplayer/ubuntu Jaunty main

升级到9.10后使用ubuntu tweak里带的mplayer及smplayer的9.10源更新后的两个软件却没有了vdpau支持
deb http://ppa.launchpad.net/rvm/mplayer/ubuntu karmic main
deb http://ppa.launchpad.net/rvm/smplayer/ubuntu karmic main

使用在论坛上看到的另一个源安装的mplayer和smplayer正常开启vdpau， 但是版本号上看起来比上面的源要老一些
deb http://ppa.launchpad.net/nvidia-vdpau/ppa/ubuntu karmic main

想问一下ubuntu tweak里带的mplayer及smplayer的软件源里的这两个软件正常情况下是否带vdpau支持？这次9.10更新后的没有应该是暂时的吧？
毕竟这个源比较新 如果可能的话还是想用这个源

谢谢

[mech]

貌似9.10自己源里面的mplayer就是svn版的，而且支持vdpau的。
是vdpau 不是vpdau吧？
终端里运行 mplayer -vo help 就可以看到了

[coolfrog]

确实是拼写错了 已改正

自带源的那个忘记有没有了 版本比我找到的那个第三方源的要早两个月
现在的情况是通过ubuntu tweak里的第三方源里更新的没有支持 让我很是苦恼

貌似9.10自己源里面的mplayer就是svn版的，而且支持vdpau的。
是vdpau 不是vpdau吧？
终端里运行 mplayer -vo help 就可以看到了

[skygun]

都是自己手动添加SMPlayer官方的源然后更新。

[coolfrog]

deb http://ppa.launchpad.net/rvm/smplayer/ubuntu karmic main
这个就是SMPlayer官方的源
可之前用这个源更新的smplayer在视频输出里根本就没vdpau这一项

[mech]

先检测一下你的mplayer是否支持vdpau，smplayer只不过是mplayer的前端GUI。
另外，要在smplayer里使用vdpau来硬解h264，还要在参数里面添加-vc ff什么的才行。好象是ffh264vdpau

[yus253]

yus253@ubuntu:~$ mplayer -vo help
MPlayer SVN-r29237-4.4.1 (C) 2000-2009 MPlayer Team
Available video output drivers:
xmga Matrox G200/G4x0/G550 overlay in X11 window (using /dev/mga_vid)
mga Matrox G200/G4x0/G550 overlay (/dev/mga_vid)
tdfxfb 3Dfx Banshee/Voodoo3/Voodoo5
3dfx 3dfx (/dev/3dfx)
xv X11/Xv
vdpau VDPAU with X11
x11 X11 ( XImage/Shm )
xover General X11 driver for overlay capable video output drivers
gl X11 (OpenGL)
gl2 X11 (OpenGL) - multiple textures version
dga DGA ( Direct Graphic Access V2.0 )
sdl SDL YUV/RGB/BGR renderer (SDL v1.1.7+ only!)
fbdev Framebuffer Device
fbdev2 Framebuffer Device
svga SVGAlib
caca libcaca
v4l2 V4L2 MPEG Video Decoder Output
directfb Direct Framebuffer Device
dfbmga DirectFB / Matrox G200/G400/G450/G550
xvidix X11 (VIDIX)
cvidix console VIDIX
null Null video output
xvmc XVideo Motion Compensation
mpegpes MPEG-PES to DVB card
yuv4mpeg yuv4mpeg output for mjpegtools
png PNG file
jpeg JPEG file
gif89a animated GIF output
tga Targa output
pnm PPM/PGM/PGMYUV file
md5sum md5sum of each frame

[yus253]

9.10配置MPLAYER的方法

MPlayer is a movie and animation player that supports a wide range of codecs and file formats, including MPEG 1/2/4,DivX 3/4/5, Windows Media 7/8/9, RealAudio/Video up to 9, Quicktime 5/6, and Vivo 1/2. It has many MX/SSE (2)/3Dnow(Ex) optimized native audio and video codecs, but allows using XAnim’s and RealPlayer’s binary codec plugins, and Win32 codec DLLs. It has basic VCD/DVD playback functionality, including DVD subtitles, but supports many text- based subtitle formats too. For video output, nearly every existing interface is supported. It’s also able to convert any supported files to raw/divx/mpeg4 AVI (pcm/mp3 audio), and even video grabbing from V4L devices.
Install Mplayer in Ubuntu 9.10 (Karmic)

You nned to make sure you have enabled universe,multiverse repositories

Now you need to run the following command to update the source list

sudo apt-get update

Install mplayer using the following command

sudo apt-get install mplayer

or

Click on the following link

apt://mplayer

If you want to open mplayer go to Applications—>Sound&Video—> Mplayer Movie Player

Install w32 video codecs and libdvdcss2 in Ubuntu 9.10 (Karmic)

Support for WMV, RealMedia and other formats has been bundled into the w32codecs package. This package is not available from the Ubuntu repositories due to licensing and legal restrictions.To play encrypted DVDs, the libdvdcss2 package is essential.

The following command adds Medibuntu’s repository to Ubuntu. It also adds Medibuntu’s GPG key to your keyring, which is needed to authenticate the Medibuntu packages.

sudo wget http://www.medibuntu.org/sources.list.d/$(lsb_release -cs).list --output-document=/etc/apt/sources.list.d/medibuntu.list

sudo apt-get -q update

sudo apt-get --yes -q --allow-unauthenticated install medibuntu-keyring

sudo apt-get -q update

For i386 Users install Codecs using the following command

sudo apt-get install w32codecs libdvdcss2

For amd64 Users install Codecs using the following command

sudo apt-get install w64codecs libdvdcss2

Using above download locations you can install most of the mutimedia codecs for ubuntu.

Mplayer Plugin for Firefox

If you want to install Mplayer with plug-in for Mozilla Firefox run the following command

sudo apt-get install mozilla-mplayer

or click on the following link

apt://mozilla-mplayer

[yus253]

We have already discussed how to install mplayer,mutimedia codecs and firefox plugin in ubuntu 9.10 this tutorial we will see two nice frontends for mplayer
Mplayer Frontends

gnome-mplayer

A simple GUI for MPlayerIt provides a simple and clean interface to MPlayer. GNOME MPlayer has a rich API that is exposed via DBus. Using DBus you can control a single or multiple instances of GNOME MPlayer from a single command.GNOME MPlayer can be used to play media on websites when used in conjunction with Gecko Mediaplayer.

Install gnome mplayer using the following command

sudo apt-get install gnome-mplayer

or click on the following link

apt://gnome-mplayer

gnome-mplayer-playlist-full

Smplayer

Install smplayer in ubuntu 9.10 (Karmic)

Edit your /etc/apt/sources.list file

gksudo gedit /etc/apt/sources.list

Add the following lines

deb http://ppa.launchpad.net/rvm/smplayer/ubuntu karmic main
deb-src http://ppa.launchpad.net/rvm/smplayer/ubuntu karmic main

Save and exit

Install GPG key

sudo apt-key adv --recv-keys --keyserver keyserver.ubuntu.com E4A4F4F4

Update source list

sudo apt-get update

Install Smplayer

sudo apt-get install smplayer

mainwindow_xp

[yus253]

我在播放六人行mkv时，smplayer控制条不走动；gnome mplayer 声音于字幕同步，而图像要慢；播放其他格式没问题。而在原来8.10，9.04没有这个问题。

[pk9284]

nvidia的ftp上的vdpau补丁已经能够让FFmpeg支持divx/mpeg4硬解码，不过需要自己安装190驱动和重编译mplayer。karmic源里的好象还不能支持，已支持的也没有nvidia放的补丁的好。