acer 3634笔记本电脑,去哪里安装linux显卡驱动?
现在是分辨率是1024*768 变形的很厉害!
求如何可以变为1280的宽频
谢谢!
acer 3634笔记本电脑,去哪里安装linux显卡驱动?
版面规则
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
-
- 帖子: 29
- 注册时间: 2006-09-27 20:28
- 来自: Yunnan
- 联系:
- karron
- 帖子: 6226
- 注册时间: 2005-06-11 14:03
- 来自: 不明真相的群众
- 联系:
-
- 帖子: 116
- 注册时间: 2006-11-03 8:49
- 来自: Halifax
if you do not have a unique graphic card in your box(I just have an Intel 945g in my Acer5602), you can use the 915resolution to modify the display mode of the Xorg. Else you should download your graphic driver from you vendor or manufacturer for linux.
1)install 915resolution through the Snaptic Package Manager
2)use command "sudo /softwarepath/915resolution -l" to get the display mode of your system
3)use command "sudo /softwarepath/915resolution <mode#> 1280 800" to modify. the mode# is the line number of the first resolution your system can not display. suggest you begin from the 16bit.
4)add this line "sudo /softwarepath/915resolution <mode#> 1280 800"to bottom of /etc/init.d/bootmisc.sh to enable automatic modifying when you bootup
5)reboot the box.
1)install 915resolution through the Snaptic Package Manager
2)use command "sudo /softwarepath/915resolution -l" to get the display mode of your system
3)use command "sudo /softwarepath/915resolution <mode#> 1280 800" to modify. the mode# is the line number of the first resolution your system can not display. suggest you begin from the 16bit.
4)add this line "sudo /softwarepath/915resolution <mode#> 1280 800"to bottom of /etc/init.d/bootmisc.sh to enable automatic modifying when you bootup
5)reboot the box.
- Jessicau
- 帖子: 330
- 注册时间: 2010-04-28 13:33
Re: acer 3634笔记本电脑,去哪里安装linux显卡驱动?
请问在哪里查看自己的电脑配置,比如显卡,CPU,硬盘等