我新装的Ubuntu6.06,电脑比较旧,想装自己机器的集成显卡驱动,但是不知道怎么装,请教各位高手,附上驱动包所带的说明文件,最好能给我详细安装步骤,我英文不好,谢谢!
PS:那个/root/xc所指的到底是哪个文件夹,搞不懂
====================================================================
VIA/S3G Twister/Pro-savage 2D/3D Display Driver for Linux XFree86
Version 1.1.18bld2, May 28, 2003
Copyright (C) 2003 VIA Technologies, Inc. and S3 Graphics, Inc.
====================================================================
Caution
=================================
Before you begin to install the graphic driver, we seriously recommend
you to update the operation system.
It is tiresome at first, but it gives you a lot more convenience to the
extent that everytime you update the driver later.
File description
=================================
This package has 2 files as follows.
1.1.18bld2.tgz Savage driver source package Version 1.1.18bld2
readme.txt This file
System update
=================================
If you have done it before, you can go to driver installation directly.
1. Put Linux red hat 8.0 disk 1 in CDROM
Window pop out " Do you wish to run /mnt/cdrom/autorun?"
2. Select "Yes"
Window pop out " Add or Remove Packages"
3. Click "Forward"
Please wait to check system package status
4. Add following items and click "Forward"
* KDE Desktop Environment
* Engineering and Scientific
* FTP Server
* Kernel Development
* KDE Software Development
* System Tools
5. Window pops out "Package Installation Overview"
Click "Forward"
6. Please wait for the system to update (about 5-10mins)
You may need to change disk during the installation
7. Reboot system
Video memory configuration
=================================
Please set the share memory not less than 16M (32M is best) in BIOS
config if your motherboard is Twister/K or PM133/KM133.
Driver Installation
=================================
Before driver installation, we assume you have XFree86 environment
installed, which is located at /root/xc in your system.
1. Copy the driver package, then follow the steps below to rebuild
XFree86 and Savage driver.
tar zxvf 1.1.18bld2.tgz
cd LinuxDriver
./savage_install /root/xc
cd /root/xc
make World
2. Install 2D driver
cd xc/programs/Xserver/hw/xfree86/drivers/savage
make install
ldconfig
sync
3. Install 3D driver
cd xc/programs/Xserver/hw/xfree86/os-support/linux/drm/kernal
make -f Makefile.linux savage.o
cp savage.o /lib/modules/*/kernel/drivers/char/drm
cd xc/lib/GL/mesa/src/drv/savage
make install
ldconfig
sync
4. Insert modules during boot time
Modify the file "/etc/rc.d/rc.local", then add the following lines.
insmod agpgart agp_try_unsupported=1
insmod savage
5. Install XvMC driver
cd xc/lib/XvMC/hw/savage
make install
ldconfig
sync
6. Enable video capture
If you have SAA7111 device, modify the file "/etc/X11/XF86Config(-4)",
then add following line in "Driver" section.
Option "SAA7111" "1"
7. Reboot system and confirm driver installation
(a) 2D
Check the file "/var/log/XFree86.0.log", then search the item
"savage" and you can get driver version information.
(b) 3D
Using "glxinfo" command to make sure the 3D function is enabled.
求教!老的集成显卡驱动安装问题
版面规则
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
-
- 帖子: 47
- 注册时间: 2006-10-07 11:00