[求助]耳塞只有一边有声音
-
- 帖子: 45
- 注册时间: 2005-12-16 13:09
- 联系:
[求助]耳塞只有一边有声音
系统:Ubuntu 5.10
主板:ASUS 5PVDC-X
声卡:板载ADI AD1986A 6声道 HDAudia
驱动:是安装是系统自动识别安装的ALSA
附:在音量控制的,“文件”--“更改设备”中,有如下信息:
0:HDA Intel (Alsa Mixer)
1:Analog Devices AD1986A(OSS Mixer)
目前系统默认的是“0”。
在“多媒体系统选择器”中,设置如下:
默认接收器
输出:ESD-Enlightenment Sound Daemon 流水线:esdsink
输出:OSS-Open Sound System 流水线:osssrc
*************************************************************************************************
现在情况是这样的:
所有有声音的时候都是右耳塞正常,左耳塞有很大的“嘶嘶。。”声,而且只有“嘶嘶”的声音。
没有声音的时候就不用说了,完全一个哑巴。
当以下情况是有声音:
1、刚开机的时候,有开机音乐。到桌面启动成功以后,就没有了。
2、使用sudo /etc/init.d/alsa-utils stop
sudo /etc/init.d/alsa-utils start
之后可以发出声音。
当以下情况是没有声音:
1、如上1所提到的,桌面启动成功以后。
2、使用如上2方法后,当其它程序如LumaQQ发声后,就又没有声音了。
**************************************************************************************************
在网上搜了N久,无果,特来求教。若能解答,万分感激!
主板:ASUS 5PVDC-X
声卡:板载ADI AD1986A 6声道 HDAudia
驱动:是安装是系统自动识别安装的ALSA
附:在音量控制的,“文件”--“更改设备”中,有如下信息:
0:HDA Intel (Alsa Mixer)
1:Analog Devices AD1986A(OSS Mixer)
目前系统默认的是“0”。
在“多媒体系统选择器”中,设置如下:
默认接收器
输出:ESD-Enlightenment Sound Daemon 流水线:esdsink
输出:OSS-Open Sound System 流水线:osssrc
*************************************************************************************************
现在情况是这样的:
所有有声音的时候都是右耳塞正常,左耳塞有很大的“嘶嘶。。”声,而且只有“嘶嘶”的声音。
没有声音的时候就不用说了,完全一个哑巴。
当以下情况是有声音:
1、刚开机的时候,有开机音乐。到桌面启动成功以后,就没有了。
2、使用sudo /etc/init.d/alsa-utils stop
sudo /etc/init.d/alsa-utils start
之后可以发出声音。
当以下情况是没有声音:
1、如上1所提到的,桌面启动成功以后。
2、使用如上2方法后,当其它程序如LumaQQ发声后,就又没有声音了。
**************************************************************************************************
在网上搜了N久,无果,特来求教。若能解答,万分感激!
-
- 帖子: 45
- 注册时间: 2005-12-16 13:09
- 联系:
-
- 帖子: 45
- 注册时间: 2005-12-16 13:09
- 联系:
-
- 帖子: 45
- 注册时间: 2005-12-16 13:09
- 联系:
-
- 帖子: 45
- 注册时间: 2005-12-16 13:09
- 联系:
-
- 帖子: 45
- 注册时间: 2005-12-16 13:09
- 联系:
-
- 帖子: 44
- 注册时间: 2007-02-01 10:16
完美回答!
本人使用的是华硕的P5PL2主板,板载了soundmax AD1986A声卡,可是在ubuntu下面却有时候出声,有时候单声道,搞的很是郁闷,寻遍了国内google的关于此板卡的驱动安装都没得到确实的解决办法。
后来发现到国外的一个网站,总算找到了解决办法,安装后reboot声卡立刻就出声了,而且两个音箱都出声了,爽啊!
摘抄如下:
Update to the latest version of alsa
These instructions do not interfere with the Ubuntu package structure or other kernel modules - in other words, the changes seem drastic however they are simply adding greater functionality to an existing kernel module
Install the required tools 安装需要的一些文件
sudo apt-get install build-essential ncurses-dev
Install your kernel headers 安装内核头文件
sudo apt-get install linux-headers-`uname -r`
Download the latest version of alsa from Alsa project (driver, library, and utils) to a directory (eg. /home/naaman/installers/alsa)
alsa-driver
下载alsa-driver驱动
alsa-lib
下载alsa-lib库文件
alsa-utils
下载alsa-utils
Setup installation directories 解压缩下载的文件
sudo mkdir -p /usr/src/alsacd /usr/src/alsasudo cp /home/naaman/installers/alsa/* .sudo tar xjf alsa-driver-1.0.14rc1.tar.bz2sudo tar xjf alsa-lib-1.0.14rc1.tar.bz2sudo tar xjf alsa-utils-1.0.14rc1.tar.bz2
Compile and install alsa-driver 重新编译安装,没有make和gcc的自己解决
cd alsa-driver-1.0.14rc1sudo ./configure --with-cards=hda-intelsudo makesudo make install
Compile and install alsa-lib
cd ../alsa-lib-1.0.14rc1sudo ./configuresudo makesudo make install
Compile and install alsa-utils
cd ../alsa-utils-1.0.14rc1sudo ./configuresudo makesudo make install
Reboot
Note: You may need to right click on the volume control applet in your gnome-panel and go to the preferences and change the device to "HDA Intel (Alsa Mixer)". The same applies to the gnome volume control program. Additionally, you may also need enable some volume sliders through Edit-Preferences in gnome volume control.
Manually tell the driver which flavor you are using
Edit the file /etc/modprobe.d/alsa-base
sudo nano /etc/modprobe.d/alsa-base
Add the line "options snd-hda-intel model=3stack" (change "3stack" to the model you need) 在该文件的末尾加上这个字符串,注意要去掉" "
后来发现到国外的一个网站,总算找到了解决办法,安装后reboot声卡立刻就出声了,而且两个音箱都出声了,爽啊!
摘抄如下:
Update to the latest version of alsa
These instructions do not interfere with the Ubuntu package structure or other kernel modules - in other words, the changes seem drastic however they are simply adding greater functionality to an existing kernel module
Install the required tools 安装需要的一些文件
sudo apt-get install build-essential ncurses-dev
Install your kernel headers 安装内核头文件
sudo apt-get install linux-headers-`uname -r`
Download the latest version of alsa from Alsa project (driver, library, and utils) to a directory (eg. /home/naaman/installers/alsa)
alsa-driver
下载alsa-driver驱动
alsa-lib
下载alsa-lib库文件
alsa-utils
下载alsa-utils
Setup installation directories 解压缩下载的文件
sudo mkdir -p /usr/src/alsacd /usr/src/alsasudo cp /home/naaman/installers/alsa/* .sudo tar xjf alsa-driver-1.0.14rc1.tar.bz2sudo tar xjf alsa-lib-1.0.14rc1.tar.bz2sudo tar xjf alsa-utils-1.0.14rc1.tar.bz2
Compile and install alsa-driver 重新编译安装,没有make和gcc的自己解决
cd alsa-driver-1.0.14rc1sudo ./configure --with-cards=hda-intelsudo makesudo make install
Compile and install alsa-lib
cd ../alsa-lib-1.0.14rc1sudo ./configuresudo makesudo make install
Compile and install alsa-utils
cd ../alsa-utils-1.0.14rc1sudo ./configuresudo makesudo make install
Reboot
Note: You may need to right click on the volume control applet in your gnome-panel and go to the preferences and change the device to "HDA Intel (Alsa Mixer)". The same applies to the gnome volume control program. Additionally, you may also need enable some volume sliders through Edit-Preferences in gnome volume control.
Manually tell the driver which flavor you are using
Edit the file /etc/modprobe.d/alsa-base
sudo nano /etc/modprobe.d/alsa-base
Add the line "options snd-hda-intel model=3stack" (change "3stack" to the model you need) 在该文件的末尾加上这个字符串,注意要去掉" "
-
- 帖子: 4
- 注册时间: 2007-12-10 13:46
解决!哈哈
功夫不负有心人那,哈哈
忙活了三天,终于让一句话搞定了!
修改/etc/modprobe.d/alsa-base,在其中加入“options snd-hda-intel position_fix=1 model=3stack”。保存然后重启,问题解决!
高手阿 ,向前辈们致敬!
忙活了三天,终于让一句话搞定了!
修改/etc/modprobe.d/alsa-base,在其中加入“options snd-hda-intel position_fix=1 model=3stack”。保存然后重启,问题解决!
高手阿 ,向前辈们致敬!