我的显示器是800x600，已经成功安装了nvidia驱动，通过sudo dpkg-reconfigure xserver-xorg，不知道如何设置刷新率？
现在我也不知道电脑现在实际的刷新率是多少。
知道的告诉一下。
[问题]刷新率怎么是50-55？
版面规则
我们都知道新人的确很菜，也喜欢抱怨，并且带有浓厚的Windows习惯，但既然在这里询问，我们就应该有责任帮助他们解决问题，而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享，以人为本，这正是Ubuntu的精神所在。
我们都知道新人的确很菜，也喜欢抱怨，并且带有浓厚的Windows习惯，但既然在这里询问，我们就应该有责任帮助他们解决问题，而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享，以人为本，这正是Ubuntu的精神所在。
-
yechf
- 帖子： 305
- 注册时间： 2006-04-27 12:18
- 来自： 浙江德清武康
[问题]刷新率怎么是50-55？
上次由 yechf 在 2007-01-03 8:58，总共编辑 1 次。
-
TualatriX
- 帖子： 359
- 注册时间： 2006-11-17 20:07
- 来自： 杭州/宁波
- 联系：
-
Ray
- 帖子： 387
- 注册时间： 2006-07-06 0:57
- 来自： Beijing, PRC
- 联系：
-
yechf
- 帖子： 305
- 注册时间： 2006-04-27 12:18
- 来自： 浙江德清武康
因为我的ubuntu无法启动到X，所以我用kde。（即kubuntu）
我的/etc/X11/xorg.conf内容如下：
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV18 [GeForce4 MX 440 AGP 8x]"
Driver "nvidia"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "SyncMaster"
Option "DPMS"
HorizSync 30-71
VertRefresh 50-160
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV18 [GeForce4 MX 440 AGP 8x]"
Monitor "SyncMaster"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 4
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 8
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 15
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 16
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "800x600"
EndSubSection
Option "AddARGBGLXVisuals" "True"
Option "TripleBuffer" "true"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
我的/etc/X11/xorg.conf内容如下：
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV18 [GeForce4 MX 440 AGP 8x]"
Driver "nvidia"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "SyncMaster"
Option "DPMS"
HorizSync 30-71
VertRefresh 50-160
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV18 [GeForce4 MX 440 AGP 8x]"
Monitor "SyncMaster"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 4
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 8
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 15
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 16
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "800x600"
EndSubSection
Option "AddARGBGLXVisuals" "True"
Option "TripleBuffer" "true"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
- 附件
-
-
skyx
- 论坛版主
- 帖子： 9202
- 注册时间： 2006-12-23 13:46
- 来自： Azores Islands
- 联系：
-
BigSnake.NET
- 帖子： 12522
- 注册时间： 2006-07-02 11:16
- 来自： 廣州
- 联系：
-
skyx
- 论坛版主
- 帖子： 9202
- 注册时间： 2006-12-23 13:46
- 来自： Azores Islands
- 联系：
-
SuperWar3Fan
- 帖子： 1263
- 注册时间： 2006-05-20 6:25
- 来自： 山东淄博
- 联系：