[问题]恢复xorg.conf后,没有声音了
版面规则
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
-
- 帖子: 21
- 注册时间: 2007-01-10 8:34
[问题]恢复xorg.conf后,没有声音了
由于安装驱动而导致xorg.conf错误,而进不去图形界面了。(也没备份)。
使用命令sudo dpkg-reconfigure xserver-xorg
然后点Yes,就提示要我输入一些Video Card的信息。然而我实在不知道怎么设置。所以就一路默认,遇到输入信息也都没输入,结果倒是能进了图形界面,但是没了声音。
要怎么办啊?我以前没用过Linux,可否说的详细些,谢谢。
声卡集成到主板里,主板是精英k8,查了一下,说什么南桥VIA 8237。这个东西实在不懂
使用命令sudo dpkg-reconfigure xserver-xorg
然后点Yes,就提示要我输入一些Video Card的信息。然而我实在不知道怎么设置。所以就一路默认,遇到输入信息也都没输入,结果倒是能进了图形界面,但是没了声音。
要怎么办啊?我以前没用过Linux,可否说的详细些,谢谢。
声卡集成到主板里,主板是精英k8,查了一下,说什么南桥VIA 8237。这个东西实在不懂
上次由 zhiwasa 在 2007-01-13 15:12,总共编辑 3 次。
-
- 帖子: 955
- 注册时间: 2006-12-18 17:04
- 来自: 福建泉州
-
- 帖子: 1074
- 注册时间: 2006-01-18 15:01
-
- 帖子: 21
- 注册时间: 2007-01-10 8:34
- ttand
- 帖子: 1745
- 注册时间: 2005-08-22 14:05
- 来自: 离开北京
-
- 帖子: 21
- 注册时间: 2007-01-10 8:34
- ttand
- 帖子: 1745
- 注册时间: 2005-08-22 14:05
- 来自: 离开北京
系统自带了通用 nv 卡驱动 教室我们说的 “nv” 模块
我们装的驱动也是一个内核模块 叫 “nvidia”
你的xorg.conf 声明了使用哪一个模块
我以前也是有这个问题,两个驱动模块冲突 结果就没有声音(比较神奇)
结果看帖子 屏蔽了 nv模块就可以了
看看 你的
/etc/default/linux-restricted-modules-common
这个配置文件
有没有 吧 nv显示模块disable掉
我装了显卡驱动以后 就把其他的显示模块 和杂项都 屏蔽了
# This file is sourced from the linux-restricted-modules-common init
# script and is used to disable the link-on-boot feature, one module
# at a time. This can be useful if you want to use hand-compiled
# versions of one or more modules, but keep linux-restricted-modules
# installed on your system, or just to disable modules you don't use
# and speed up your boot process by a second or two.
#
# Use a space-separated list of modules you wish to not have linked
# on boot. The following example shows a (condensed) list of all
# modules shipped in the linux-restricted-modules packages:
#
DISABLED_MODULES="ath_hal fc fglrx ltm nv"
#
# Note that disabling "fc" disables all fcdsl drivers, "ltm" disables
# ltmodem and ltserial, and "nv" disables both the nvidia drivers.
# You can also name each module individually, if you prefer a subset.
我们装的驱动也是一个内核模块 叫 “nvidia”
你的xorg.conf 声明了使用哪一个模块
我以前也是有这个问题,两个驱动模块冲突 结果就没有声音(比较神奇)
结果看帖子 屏蔽了 nv模块就可以了
看看 你的
/etc/default/linux-restricted-modules-common
这个配置文件
有没有 吧 nv显示模块disable掉
我装了显卡驱动以后 就把其他的显示模块 和杂项都 屏蔽了
# This file is sourced from the linux-restricted-modules-common init
# script and is used to disable the link-on-boot feature, one module
# at a time. This can be useful if you want to use hand-compiled
# versions of one or more modules, but keep linux-restricted-modules
# installed on your system, or just to disable modules you don't use
# and speed up your boot process by a second or two.
#
# Use a space-separated list of modules you wish to not have linked
# on boot. The following example shows a (condensed) list of all
# modules shipped in the linux-restricted-modules packages:
#
DISABLED_MODULES="ath_hal fc fglrx ltm nv"
#
# Note that disabling "fc" disables all fcdsl drivers, "ltm" disables
# ltmodem and ltserial, and "nv" disables both the nvidia drivers.
# You can also name each module individually, if you prefer a subset.
错过好多好贴,没占到广告位后悔啊
-
- 帖子: 21
- 注册时间: 2007-01-10 8:34
用了你这种方法了,还是不行,但多谢你。ttand 写了:系统自带了通用 nv 卡驱动 教室我们说的 “nv” 模块
我们装的驱动也是一个内核模块 叫 “nvidia”
你的xorg.conf 声明了使用哪一个模块
我以前也是有这个问题,两个驱动模块冲突 结果就没有声音(比较神奇)
结果看帖子 屏蔽了 nv模块就可以了
看看 你的
/etc/default/linux-restricted-modules-common
这个配置文件
有没有 吧 nv显示模块disable掉
我装了显卡驱动以后 就把其他的显示模块 和杂项都 屏蔽了
# This file is sourced from the linux-restricted-modules-common init
# script and is used to disable the link-on-boot feature, one module
# at a time. This can be useful if you want to use hand-compiled
# versions of one or more modules, but keep linux-restricted-modules
# installed on your system, or just to disable modules you don't use
# and speed up your boot process by a second or two.
#
# Use a space-separated list of modules you wish to not have linked
# on boot. The following example shows a (condensed) list of all
# modules shipped in the linux-restricted-modules packages:
#
DISABLED_MODULES="ath_hal fc fglrx ltm nv"
#
# Note that disabling "fc" disables all fcdsl drivers, "ltm" disables
# ltmodem and ltserial, and "nv" disables both the nvidia drivers.
# You can also name each module individually, if you prefer a subset.