升级10.04出现问题！

[ynsc]

在线升级10.04后在启动的过程中出现问题：

an error occurred while mounting mount
press S to Skip mount or M for Manual Recovery

我按S后，正常进入系统。估计是磁盘mount的问题。
我的/etc/fstab文件是这样的：

# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda7 during installation
UUID=007a33bc-e006-407e-adcb-b57b43b829a8 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda8 during installation
UUID=fa1a6e6a-8f34-43ab-bd3e-58a8d1f00100 none swap sw 0 0
#Enjoy sda6
UUID=AA786AFC786AC6A3 /media/Enjoy ntfs-3g defaults,uid=<ynsc>,gid=<users> 0 0
#Share sda5
UUID=BE926199926156C5 /media/Share ntfs-3g defaults,uid=<ynsc>,gid=<users> 0 0
#UUID=0182-0182 /media/SHARE vfat defaults,iocharset=utf8,umask=000 0 0
sudo mount -a

请各位大侠指教！
谢谢！！！

[wowoto]

把那些uuid表示的改为 /dev/sdX？
cat /proc/partitions

[ynsc]

我改成这样：

# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda7 during installation
/dev/sda7 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda8 during installation
/dev/sda8 none swap sw 0 0
#Enjoy sda6
/dev/sda6 /media/Enjoy ntfs-3g defaults,uid=<ynsc>,gid=<users> 0 0
#Share sda5
/dev/sda5 /media/Share ntfs-3g defaults,uid=<ynsc>,gid=<users> 0 0
#UUID=0182-0182 /media/SHARE vfat defaults,iocharset=utf8,umask=000 0 0
sudo mount -a

可问题依旧！

cat /proc/partitions的结果如下：

ynsc-desktop:~$ cat /proc/partitions
major minor #blocks name

8 0 488386584 sda
8 1 52428096 sda1
8 2 1 sda2
8 3 31455238 sda3
8 4 205270506 sda4
8 5 52425728 sda5
8 6 83883366 sda6
8 7 29455146 sda7
8 8 2096451 sda8
8 9 31358848 sda9

请高人帮助！谢谢！

[ynsc]

请大仙指路！

[monk]

# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda7 during installation
/dev/sda7 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda8 during installation
/dev/sda8 none swap sw 0 0
#Enjoy sda6
/dev/sda6 /media/Enjoy ntfs-3g defaults,uid=<ynsc>,gid=<users> 0 0
#Share sda5
/dev/sda5 /media/Share ntfs-3g defaults,uid=<ynsc>,gid=<users> 0 0
#UUID=0182-0182 /media/SHARE vfat defaults,iocharset=utf8,umask=000 0 0
sudo mount -a

把红色部分去掉试试
确定这两个文件夹是否存在 /media/Enjoy /media/Share

[monk]

这是我的配置给你参考参考

代码： 全选

# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
/dev/sda1       /               ext4    errors=remount-ro 0       1
# /home was on /dev/sda4 during installation
UUID=5e2021df-e2c5-4150-b33c-401f7a1dddda /home           ext4    defaults        0       2
# swap was on /dev/sda3 during installation
UUID=bde27eab-7b7b-49a0-89d5-99cd66e44049 none            swap    sw              0       0
# /home/monk/sda2 was on /dev/sda2 during installation
UUID=bb3f100a-e9d8-444c-be47-093ec2ee9584 /home/monk/sda2           ext4    defaults        0       2

[ynsc]

把红色部分去掉试试
确定这两个文件夹是否存在 /media/Enjoy /media/Share

删除sudo mount -a后，一切恢复正常！

谢谢老兄的指点！

我发现我的电脑升级10.04后，启动和关机的速度变慢了！！！
以前在9.10下的速度比现在快多了！

[johnnytao]

我的Ubuntu由8.04升级到10.04也遇到了这个问题，麻烦大家帮忙看下～

代码： 全选

# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
# /dev/sda3
UUID=9fccd010-699b-4282-b9f3-532723b6c848 /               ext3    relatime,errors=remount-ro 0       1
# /dev/sda1
UUID=de366d4c-51d3-4ff3-a29c-3113775c224d /boot           ext3    relatime        0       2
# /dev/sda2
UUID=eb6fa2f2-5368-4d97-958a-d7c5122a8c91 none            swap    sw              0       0
# /dev/sda4
UUID=2a8b2c9d-4461-ce0e-52ee-90c027612939 /local/media    ext3
relatime,errors=remount-ro 0       1
/dev/scd0       /media/cdrom0   udf,iso9660 user,noauto,exec,utf8 0       0
# /dev/fd0        /media/floppy0  auto    rw,user,noauto,exec,utf8 0       0