死机呀死机

[yesq]

各种装机方法试遍后，终于碰到两次间隔很长的死机，Ubuntu完整的安装成功。但是死机还在继续。
在临死机前打开了系统日志。哪位高手能帮忙看看？谢谢了

[leeaman]

看top还好过啊

[yesq]

还有这个 dmesg


https://doc-08-4s-docs.googleuserconten ... cjupsu5mub

征兆就是鼠标点击间隔小于一秒，火狐同时开两个页面，打字一秒钟超过两个。之后就必然的要死机。

[yesq]

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7f0000 (usable)
[ 0.000000] BIOS-e820: 000000003f7f0000 - 000000003f7fe000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f7fe000 - 000000003f800000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x3f7f0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03F800000 mask FFF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003f7f0000 (usable)
[ 0.000000] modified: 000000003f7f0000 - 000000003f7fe000 (ACPI data)
[ 0.000000] modified: 000000003f7fe000 - 000000003f800000 (ACPI NVS)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 2f230000 - 2fa33d64
[ 0.000000] ACPI: RSDP 000f8e60 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 3f7f0000 00034 (v01 A M I OEMRSDT 04000811 MSFT 00000097)
[ 0.000000] ACPI: FACP 3f7f0200 00084 (v02 A M I OEMFACP 04000811 MSFT 00000097)
[ 0.000000] ACPI: DSDT 3f7f0440 04DE1 (v01 45GBM 45GBM011 00000011 INTL 02002026)
[ 0.000000] ACPI: FACS 3f7fe000 00040
[ 0.000000] ACPI: APIC 3f7f0390 0006C (v01 A M I OEMAPIC 04000811 MSFT 00000097)
[ 0.000000] ACPI: MCFG 3f7f0400 0003C (v01 A M I OEMMCFG 04000811 MSFT 00000097)
[ 0.000000] ACPI: OEMB 3f7fe040 00056 (v01 A M I AMI_OEM 04000811 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[ 0.000000] #4 [002f230000 - 002fa33d64] RAMDISK ==> [002f230000 - 002fa33d64]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [00008da000 - 00008dd197] BRK ==> [00008da000 - 00008dd197]
[ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003f7f0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f7f0
[ 0.000000] On node 0 totalpages: 259967
[ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1001200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 256 pages used for memmap
[ 0.000000] HighMem zone: 32498 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3f800000 (gap: 3f800000:bf600000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36024 r0 d21320 u1048576
[ 0.000000] pcpu-alloc: s36024 r0 d21320 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257935
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 5201280 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003f7f0)
[ 0.000000] Memory: 1008616k/1040320k available (4673k kernel code, 30532k reserved, 2122k data, 656k init, 131016k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB)
[ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2000.453 MHz processor.
[ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.90 BogoMIPS (lpj=8001812)
[ 0.004026] Security Framework initialized
[ 0.004054] AppArmor: AppArmor initialized
[ 0.004062] Mount-cache hash table entries: 512
[ 0.004219] Initializing cgroup subsys ns
[ 0.004223] Initializing cgroup subsys cpuacct
[ 0.004229] Initializing cgroup subsys memory
[ 0.004236] Initializing cgroup subsys devices
[ 0.004238] Initializing cgroup subsys freezer
[ 0.004240] Initializing cgroup subsys net_cls
[ 0.004263] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004266] CPU: L2 cache: 1024K
[ 0.004269] CPU: Physical Processor ID: 0
[ 0.004271] CPU: Processor Core ID: 0
[ 0.004275] mce: CPU supports 6 MCE banks
[ 0.004284] CPU0: Thermal monitoring enabled (TM1)
[ 0.004288] using mwait in idle threads.
[ 0.004296] Performance Events: Core2 events, Intel PMU driver.
[ 0.004306] ... version: 2
[ 0.004307] ... bit width: 40
[ 0.004309] ... generic registers: 2
[ 0.004311] ... value mask: 000000ffffffffff
[ 0.004313] ... max period: 000000007fffffff
[ 0.004315] ... fixed-purpose events: 3
[ 0.004317] ... event mask: 0000000700000003
[ 0.004323] Checking 'hlt' instruction... OK.
[ 0.022867] ACPI: Core revision 20090903
[ 0.032012] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.032017] ftrace: allocating 21771 entries in 43 pages
[ 0.036073] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.040264] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.079956] CPU0: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping 0d
[ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 1024K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM1)
[ 0.164049] CPU1: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping 0d
[ 0.164062] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.168022] Brought up 2 CPUs
[ 0.168025] Total of 2 processors activated (8001.27 BogoMIPS).
[ 0.168399] CPU0 attaching sched-domain:
[ 0.168403] domain 0: span 0-1 level MC
[ 0.168406] groups: 0 1
[ 0.168412] CPU1 attaching sched-domain:
[ 0.168414] domain 0: span 0-1 level MC
[ 0.168417] groups: 1 0
[ 0.168529] devtmpfs: initialized
[ 0.168529] regulator: core version 0.5
[ 0.168529] Time: 10:33:28 Date: 07/30/10
[ 0.168529] NET: Registered protocol family 16
[ 0.168529] Trying to unpack rootfs image as initramfs...
[ 0.168529] EISA bus registered
[ 0.168529] ACPI: bus type pci registered
[ 0.168529] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
[ 0.168529] PCI: Not using MMCONFIG.
[ 0.168529] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
[ 0.168529] PCI: Using configuration type 1 for base access
[ 0.168543] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.168545] mtrr: probably your BIOS does not setup all CPUs.
[ 0.168547] mtrr: corrected configuration.
[ 0.172143] bio: create slab <bio-0> at 0
[ 0.172950] ACPI: EC: Look up EC in DSDT
[ 0.176968] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.181998] ACPI: Interpreter enabled
[ 0.182015] ACPI: (supports S0 S1 S4 S5)
[ 0.182040] ACPI: Using IOAPIC for interrupt routing
[ 0.182098] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
[ 0.201172] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
[ 0.201177] PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.201180] PCI: Using MMCONFIG for extended config space
[ 0.210612] ACPI Warning: Incorrect checksum in table [OEMB] - 4A, should be 45 (20090903/tbutils-314)
[ 0.210727] ACPI: No dock devices found.
[ 0.210850] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.210959] pci 0000:00:02.0: reg 10 32bit mmio: [0xffa80000-0xffafffff]
[ 0.210964] pci 0000:00:02.0: reg 14 io port: [0xec00-0xec07]
[ 0.210970] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xe0000000-0xefffffff]
[ 0.210975] pci 0000:00:02.0: reg 1c 32bit mmio: [0xffa40000-0xffa7ffff]
[ 0.211088] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.211092] pci 0000:00:1c.0: PME# disabled
[ 0.211147] pci 0000:00:1d.0: reg 20 io port: [0xe000-0xe01f]
[ 0.211199] pci 0000:00:1d.1: reg 20 io port: [0xdc00-0xdc1f]
[ 0.211251] pci 0000:00:1d.2: reg 20 io port: [0xd880-0xd89f]
[ 0.211308] pci 0000:00:1d.3: reg 20 io port: [0xd800-0xd81f]
[ 0.211365] pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa3fc00-0xffa3ffff]
[ 0.211421] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.211426] pci 0000:00:1d.7: PME# disabled
[ 0.211510] pci 0000:00:1e.2: reg 10 io port: [0xd400-0xd4ff]
[ 0.211517] pci 0000:00:1e.2: reg 14 io port: [0xd080-0xd0bf]
[ 0.211523] pci 0000:00:1e.2: reg 18 32bit mmio: [0xffa3f800-0xffa3f9ff]
[ 0.211531] pci 0000:00:1e.2: reg 1c 32bit mmio: [0xffa3f400-0xffa3f4ff]
[ 0.211560] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[ 0.211564] pci 0000:00:1e.2: PME# disabled
[ 0.211653] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.211660] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.211664] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.211668] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 0.211714] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.211722] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.211729] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
[ 0.211736] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
[ 0.211743] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.211788] pci 0000:00:1f.2: reg 10 io port: [0xe880-0xe887]
[ 0.211795] pci 0000:00:1f.2: reg 14 io port: [0xe800-0xe803]
[ 0.211801] pci 0000:00:1f.2: reg 18 io port: [0xe480-0xe487]
[ 0.211807] pci 0000:00:1f.2: reg 1c io port: [0xe400-0xe403]
[ 0.211814] pci 0000:00:1f.2: reg 20 io port: [0xe080-0xe08f]
[ 0.211839] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.211843] pci 0000:00:1f.2: PME# disabled
[ 0.211893] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.211981] pci 0000:01:00.0: reg 10 io port: [0xc800-0xc8ff]
[ 0.212028] pci 0000:01:00.0: reg 18 64bit mmio: [0xff8ff000-0xff8fffff]
[ 0.212053] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xff8c0000-0xff8dffff]
[ 0.212109] pci 0000:01:00.0: supports D1 D2
[ 0.212111] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.212117] pci 0000:01:00.0: PME# disabled
[ 0.212175] pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff]
[ 0.212180] pci 0000:00:1c.0: bridge 32bit mmio: [0xff800000-0xff8fffff]
[ 0.212240] pci 0000:00:1e.0: transparent bridge
[ 0.212260] pci_bus 0000:00: on NUMA node 0
[ 0.212266] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.212414] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.212538] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.220610] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.220723] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.220833] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.220939] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.221043] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.221155] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.221261] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.221367] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.221498] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.221512] vgaarb: loaded
[ 0.221646] SCSI subsystem initialized
[ 0.221765] libata version 3.00 loaded.
[ 0.221846] usbcore: registered new interface driver usbfs
[ 0.221868] usbcore: registered new interface driver hub
[ 0.221904] usbcore: registered new device driver usb
[ 0.222052] ACPI: WMI: Mapper loaded
[ 0.222054] PCI: Using ACPI for IRQ routing
[ 0.222218] NetLabel: Initializing
[ 0.222220] NetLabel: domain hash size = 128
[ 0.222222] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.222237] NetLabel: unlabeled traffic allowed by default
[ 0.222400] hpet clockevent registered
[ 0.222403] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.222408] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.222413] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.228079] Switching to clocksource tsc
[ 0.230331] AppArmor: AppArmor Filesystem Enabled
[ 0.230356] pnp: PnP ACPI init
[ 0.230382] ACPI: bus type pnp registered
[ 0.236102] pnp: PnP ACPI: found 17 devices
[ 0.236105] ACPI: ACPI bus type pnp unregistered
[ 0.236111] PnPBIOS: Disabled by ACPI PNP
[ 0.236128] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 0.236138] system 00:0a: ioport range 0xa00-0xa0f has been reserved
[ 0.236141] system 00:0a: ioport range 0xa10-0xa1f has been reserved
[ 0.236144] system 00:0a: ioport range 0xa20-0xa2f has been reserved
[ 0.236147] system 00:0a: ioport range 0xa30-0xa3f has been reserved
[ 0.236154] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 0.236157] system 00:0b: ioport range 0x800-0x87f has been reserved
[ 0.236160] system 00:0b: ioport range 0x480-0x4bf has been reserved
[ 0.236164] system 00:0b: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.236167] system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.236174] system 00:0d: iomem range 0xffc00000-0xfff7ffff has been reserved
[ 0.236180] system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.236183] system 00:0e: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.236189] system 00:0f: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.236196] system 00:10: iomem range 0x0-0x9ffff could not be reserved
[ 0.236199] system 00:10: iomem range 0xc0000-0xcffff could not be reserved
[ 0.236202] system 00:10: iomem range 0xe0000-0xfffff could not be reserved
[ 0.236205] system 00:10: iomem range 0x100000-0x3f7fffff could not be reserved
[ 0.270956] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.270960] pci 0000:00:1c.0: IO window: 0xc000-0xcfff
[ 0.270967] pci 0000:00:1c.0: MEM window: 0xff800000-0xff8fffff
[ 0.270972] pci 0000:00:1c.0: PREFETCH window: 0x00000040000000-0x000000401fffff
[ 0.270979] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.270981] pci 0000:00:1e.0: IO window: disabled
[ 0.270986] pci 0000:00:1e.0: MEM window: disabled
[ 0.270991] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.271016] alloc irq_desc for 16 on node -1
[ 0.271018] alloc kstat_irqs on node -1
[ 0.271026] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.271034] pci 0000:00:1c.0: setting latency timer to 64
[ 0.271041] pci 0000:00:1e.0: setting latency timer to 64
[ 0.271046] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.271049] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.271052] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.271055] pci_bus 0000:01: resource 1 mem: [0xff800000-0xff8fffff]
[ 0.271057] pci_bus 0000:01: resource 2 pref mem [0x40000000-0x401fffff]
[ 0.271060] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.271064] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.271112] NET: Registered protocol family 2
[ 0.271250] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.271644] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.272391] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.272855] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.272860] TCP reno registered
[ 0.273014] NET: Registered protocol family 1
[ 0.273042] pci 0000:00:02.0: Boot video device
[ 0.273373] cpufreq-nforce2: No nForce2 chipset.
[ 0.273404] Scanning for low memory corruption every 60 seconds
[ 0.273534] audit: initializing netlink socket (disabled)
[ 0.273551] type=2000 audit(1280486008.271:1): initialized
[ 0.283652] highmem bounce pool size: 64 pages
[ 0.283658] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.285288] VFS: Disk quotas dquot_6.5.2
[ 0.285358] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.285998] fuse init (API version 7.13)
[ 0.286086] msgmni has been set to 1715
[ 0.286350] alg: No test for stdrng (krng)
[ 0.286414] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.286418] io scheduler noop registered
[ 0.286419] io scheduler anticipatory registered
[ 0.286422] io scheduler deadline registered
[ 0.286463] io scheduler cfq registered (default)
[ 0.286611] alloc irq_desc for 24 on node -1
[ 0.286613] alloc kstat_irqs on node -1
[ 0.286625] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.286635] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.286727] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.286789] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.286908] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.286912] ACPI: Power Button [PWRB]
[ 0.286961] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.286963] ACPI: Power Button [PWRF]
[ 0.287259] processor LNXCPU:00: registered as cooling_device0
[ 0.287296] processor LNXCPU:01: registered as cooling_device1
[ 0.293192] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.293294] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.293671] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.294931] brd: module loaded
[ 0.295459] loop: module loaded
[ 0.295593] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.295724] ata_piix 0000:00:1f.1: version 2.13
[ 0.295745] alloc irq_desc for 18 on node -1
[ 0.295747] alloc kstat_irqs on node -1
[ 0.295757] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.295799] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.295895] scsi0 : ata_piix
[ 0.295991] scsi1 : ata_piix
[ 0.297263] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.297267] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.297296] alloc irq_desc for 19 on node -1
[ 0.297298] alloc kstat_irqs on node -1
[ 0.297304] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.297308] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.297349] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.297416] scsi2 : ata_piix
[ 0.297477] scsi3 : ata_piix
[ 0.298807] ata3: SATA max UDMA/133 cmd 0xe880 ctl 0xe800 bmdma 0xe080 irq 19
[ 0.298810] ata4: SATA max UDMA/133 cmd 0xe480 ctl 0xe400 bmdma 0xe088 irq 19
[ 0.299171] Fixed MDIO Bus: probed
[ 0.299209] PPP generic driver version 2.4.2
[ 0.299275] tun: Universal TUN/TAP device driver, 1.6
[ 0.299277] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.299387] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.299449] alloc irq_desc for 23 on node -1
[ 0.299451] alloc kstat_irqs on node -1
[ 0.299458] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.299478] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.299482] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.299519] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.299542] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.299553] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.303433] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.303469] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffa3fc00
[ 0.307480] isapnp: Scanning for PnP cards...
[ 0.356567] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.356731] usb usb1: configuration #1 chosen from 1 choice
[ 0.356775] hub 1-0:1.0: USB hub found
[ 0.356785] hub 1-0:1.0: 8 ports detected
[ 0.356870] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.356892] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.356950] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.356960] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.356963] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.357011] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.357039] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e000
[ 0.357139] usb usb2: configuration #1 chosen from 1 choice
[ 0.357165] hub 2-0:1.0: USB hub found
[ 0.357172] hub 2-0:1.0: 2 ports detected
[ 0.357223] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.357233] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.357236] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.357270] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.357293] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000dc00
[ 0.357384] usb usb3: configuration #1 chosen from 1 choice
[ 0.357410] hub 3-0:1.0: USB hub found
[ 0.357417] hub 3-0:1.0: 2 ports detected
[ 0.357468] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.357475] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.357478] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.357510] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.357544] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d880
[ 0.357643] usb usb4: configuration #1 chosen from 1 choice
[ 0.357669] hub 4-0:1.0: USB hub found
[ 0.357675] hub 4-0:1.0: 2 ports detected
[ 0.357725] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.357733] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.357737] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.357779] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.357811] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d800
[ 0.357905] usb usb5: configuration #1 chosen from 1 choice
[ 0.357931] hub 5-0:1.0: USB hub found
[ 0.357937] hub 5-0:1.0: 2 ports detected
[ 0.358054] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.378894] Freeing initrd memory: 8207k freed
[ 0.403730] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.403741] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.403901] mice: PS/2 mouse device common for all mice
[ 0.404036] rtc_cmos 00:03: RTC can wake from S4
[ 0.404082] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.404107] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.404242] device-mapper: uevent: version 1.0.3
[ 0.404483] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.404564] device-mapper: multipath: version 1.1.0 loaded
[ 0.404567] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.404695] EISA: Probing bus 0 at eisa.0
[ 0.404723] EISA: Detected 0 cards.
[ 0.404797] cpuidle: using governor ladder
[ 0.404800] cpuidle: using governor menu
[ 0.405273] TCP cubic registered
[ 0.405431] NET: Registered protocol family 10
[ 0.405940] lo: Disabled Privacy Extensions
[ 0.406295] NET: Registered protocol family 17
[ 0.406359] Using IPI No-Shortcut mode
[ 0.406440] PM: Resume from disk failed.
[ 0.406453] registered taskstats version 1
[ 0.406717] Magic number: 2:350:579
[ 0.406758] pci_bus 0000:00: hash matches
[ 0.406800] rtc_cmos 00:03: setting system clock to 2010-07-30 10:33:28 UTC (1280486008)
[ 0.406803] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.406805] EDD information not available.
[ 0.423446] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.595435] ata3.00: ATA-7: ST3160815AS, 4.AAB, max UDMA/133
[ 0.595439] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.664278] isapnp: No Plug & Play device found
[ 0.670414] ata3.00: configured for UDMA/133
[ 0.670599] scsi 2:0:0:0: Direct-Access ATA ST3160815AS 4.AA PQ: 0 ANSI: 5
[ 0.670740] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 0.670756] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 0.670791] sd 2:0:0:0: [sda] Write Protect is off
[ 0.670793] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.670826] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.670972] sda: sda1 sda2 < sda5 sda6 >
[ 0.743137] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.743152] Freeing unused kernel memory: 656k freed
[ 0.743489] Write protecting the kernel text: 4676k
[ 0.743534] Write protecting the kernel read-only data: 1840k
[ 0.762320] udev: starting version 151
[ 0.881726] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.881752] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.881799] r8169 0000:01:00.0: setting latency timer to 64
[ 0.881864] alloc irq_desc for 25 on node -1
[ 0.881866] alloc kstat_irqs on node -1
[ 0.881885] r8169 0000:01:00.0: irq 25 for MSI/MSI-X
[ 0.882600] eth0: RTL8101e at 0xf8054000, 00:e1:4c:06:3e:b3, XID 94200000 IRQ 25
[ 1.402249] EXT4-fs (loop0): INFO: recovery required on readonly filesystem
[ 1.402254] EXT4-fs (loop0): write access will be enabled during recovery
[ 1.580953] EXT4-fs (loop0): orphan cleanup on readonly fs
[ 1.580962] EXT4-fs (loop0): ext4_orphan_cleanup: deleting unreferenced inode 412323
[ 1.581042] EXT4-fs (loop0): ext4_orphan_cleanup: deleting unreferenced inode 412216
[ 1.581060] EXT4-fs (loop0): 2 orphan inodes deleted
[ 1.581064] EXT4-fs (loop0): recovery complete
[ 1.581867] EXT4-fs (loop0): mounted filesystem with ordered data mode
[ 8.979181] udev: starting version 151
[ 9.246067] lp: driver loaded but no devices found
[ 9.256772] parport_pc 00:07: reported by Plug and Play ACPI
[ 9.256830] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 9.322472] ppdev: user-space parallel port driver
[ 9.349672] lp0: using parport0 (interrupt-driven).
[ 9.458523] Linux agpgart interface v0.103
[ 9.468570] intel_rng: FWH not detected
[ 9.485157] agpgart-intel 0000:00:00.0: Intel 945G Chipset
[ 9.485486] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 9.487814] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 9.502800] psmouse serio1: ID: 10 00 64
[ 9.591250] type=1505 audit(1280457217.681:2): operation="profile_load" pid=580 name="/sbin/dhclient3"
[ 9.592150] type=1505 audit(1280457217.681:3): operation="profile_load" pid=580 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 9.592573] type=1505 audit(1280457217.685:4): operation="profile_load" pid=580 name="/usr/lib/connman/scripts/dhclient-script"
[ 9.619741] [drm] Initialized drm 1.1.0 20060810
[ 9.698827] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.698835] i915 0000:00:02.0: setting latency timer to 64
[ 9.703067] [drm] set up 7M of stolen space
[ 9.704227] [drm] initialized overlay support
[ 9.869035] fb0: inteldrmfb frame buffer device
[ 9.869038] registered panic notifier
[ 9.869047] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 10.180324] vga16fb: initializing
[ 10.180331] vga16fb: mapped to 0xc00a0000
[ 10.180337] vga16fb: not registering due to another framebuffer present
[ 10.193034] alloc irq_desc for 17 on node -1
[ 10.193037] alloc kstat_irqs on node -1
[ 10.193045] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 10.193108] Intel ICH 0000:00:1e.2: setting latency timer to 64
[ 10.217781] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 10.353860] Console: switching to colour frame buffer device 160x64
[ 10.517119] intel8x0_measure_ac97_clock: measured 55506 usecs (2675 samples)
[ 10.517123] intel8x0: clocking to 48000
[ 11.250289] Adding 261112k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:261112k
[ 11.627486] type=1505 audit(1280457219.717:5): operation="profile_load" pid=905 name="/usr/share/gdm/guest-session/Xsession"
[ 11.630695] type=1505 audit(1280457219.721:6): operation="profile_replace" pid=909 name="/sbin/dhclient3"
[ 11.631409] type=1505 audit(1280457219.721:7): operation="profile_replace" pid=909 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 11.631790] type=1505 audit(1280457219.721:8): operation="profile_replace" pid=909 name="/usr/lib/connman/scripts/dhclient-script"
[ 11.668133] type=1505 audit(1280457219.761:9): operation="profile_load" pid=910 name="/usr/bin/evince"
[ 11.680262] r8169: eth0: link up
[ 11.680274] r8169: eth0: link up
[ 11.700991] type=1505 audit(1280457219.793:10): operation="profile_load" pid=910 name="/usr/bin/evince-previewer"
[ 11.707145] type=1505 audit(1280457219.797:11): operation="profile_load" pid=910 name="/usr/bin/evince-thumbnailer"

[thorne]

就算是X死了
linux也没有死的吧

[thorne]

用grep没有在mesg输出中找到任何的错误信息

[yhvista]

我也碰到这个问题。经常性的。可以解决吗