HP 500 的机子鼠标控制板不能用 用过suse也不行就自由自带的红旗可以使用
宽屏也不会弄安了915resolution 然后用915resolution -l 没有宽屏的模式能给一个具体的方法吗
HP 500 的机子鼠标控制板宽屏都不能用
-
- 帖子: 40
- 注册时间: 2006-11-01 0:28
HP 500 的机子鼠标控制板宽屏都不能用
上次由 dennis175 在 2007-02-15 0:00,总共编辑 1 次。
- CNBorn
- 帖子: 139
- 注册时间: 2006-04-28 18:40
- 来自: 北京
- 联系:
-
- 帖子: 8
- 注册时间: 2005-11-11 16:11
-
- 帖子: 26
- 注册时间: 2006-03-09 11:56
- sinoyster
- 帖子: 958
- 注册时间: 2005-10-16 13:24
- 来自: 四川成都
- 联系:
-
- 帖子: 8
- 注册时间: 2005-11-11 16:11
感谢4楼,5楼,我今天都试过了
Section "ServerFlags"
option "Pixmap" "32"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
# 1280x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 80.14 MHz
HorizSync 30.0 - 80.0
VertRefresh 55.0 - 70.0
Modeline "1280x768_60.00" 80.14 1280 1344 1480 1680 768 769 772 795 -HSync +Vsync
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
Monitor "Generic Monitor"
Option "AddARGBGLXVisuals" "True" #这个我不太清楚
Option "TripleBuffer" "true" #这个我不太清楚
#DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x768"
EndSubSection
EndSection
这个也都加上了,估计是显示器不支持的,或要安装显示器的驱动,郁闷!。。。
另外发现在不起动x时,运行zhcon也会黑屏。
Section "ServerFlags"
option "Pixmap" "32"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
# 1280x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 80.14 MHz
HorizSync 30.0 - 80.0
VertRefresh 55.0 - 70.0
Modeline "1280x768_60.00" 80.14 1280 1344 1480 1680 768 769 772 795 -HSync +Vsync
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
Monitor "Generic Monitor"
Option "AddARGBGLXVisuals" "True" #这个我不太清楚
Option "TripleBuffer" "true" #这个我不太清楚
#DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x768"
EndSubSection
EndSection
这个也都加上了,估计是显示器不支持的,或要安装显示器的驱动,郁闷!。。。
另外发现在不起动x时,运行zhcon也会黑屏。
-
- 帖子: 8
- 注册时间: 2005-11-11 16:11