我的系统终于出问题了!can't access tty
版面规则
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
- Soonfish
- 帖子: 53
- 注册时间: 2007-02-26 23:38
我的系统终于出问题了!can't access tty
先简单介绍一下问题:
前些天,开机时可以由GRUB正确引导,可是进入默认的edgy系统下后.提示:/bin/sh:can't access tty;job control turned off 装系统时我也碰到这种情况,那是因为我没把相应的盘转换为fat32.
再介绍一下自己最后一次操作吧,那些天我一直为我的x300的3D加速烦恼,我也记不太清到底误操作了什么.只是在想关机时发现没有关机键和重起键,在终端shutdown都说没有此指令......
后来尝试用recovery模式,可是进入后也提示类似问题!!!!!
昨天在杂志上看到有款Ext2 Installable File System for Windows的软件可以读写linux的ext2,ext3分区.我可不可以借助于它,如果能该怎么做!!!
高手指点
前些天,开机时可以由GRUB正确引导,可是进入默认的edgy系统下后.提示:/bin/sh:can't access tty;job control turned off 装系统时我也碰到这种情况,那是因为我没把相应的盘转换为fat32.
再介绍一下自己最后一次操作吧,那些天我一直为我的x300的3D加速烦恼,我也记不太清到底误操作了什么.只是在想关机时发现没有关机键和重起键,在终端shutdown都说没有此指令......
后来尝试用recovery模式,可是进入后也提示类似问题!!!!!
昨天在杂志上看到有款Ext2 Installable File System for Windows的软件可以读写linux的ext2,ext3分区.我可不可以借助于它,如果能该怎么做!!!
高手指点
- Soonfish
- 帖子: 53
- 注册时间: 2007-02-26 23:38
- Soonfish
- 帖子: 53
- 注册时间: 2007-02-26 23:38
- juanzhewudi
- 帖子: 1114
- 注册时间: 2006-01-19 11:55
- 来自: HUST
- 联系:
- Soonfish
- 帖子: 53
- 注册时间: 2007-02-26 23:38
ctrl+alt+F*不可以切换控制台,痛苦啊!!!juanzhewudi 写了:是开机后终端出现了这个字样?Soonfish 写了:我的意思就是开机后出现了bin/sh:can't access tty;job control turned off 字样......花墓狼 写了:i don't quite understand your words in the first floor...
不知道怎么弄
ctrl+alt+F*可不可以切换控制台?
能进控制台就一般有救
ps:主要是楼主写得太意识流了,我语文不好,抱歉
终端shutdown如果是用普通用户执行,说没有这个命令,那么说明可能是环境变量里路径没有包含/sbin吧。。
看到过提示/sbin字样,估计那有问题吧!!!!
现在谁有办法的尽量说啊,除了重装
- Soonfish
- 帖子: 53
- 注册时间: 2007-02-26 23:38
- eexpress
- 帖子: 58428
- 注册时间: 2005-08-14 21:55
- 来自: 长沙
- Soonfish
- 帖子: 53
- 注册时间: 2007-02-26 23:38
- Soonfish
- 帖子: 53
- 注册时间: 2007-02-26 23:38
我在国外的论坛上看到一篇和我类似的帖子了.
接决方法如下:
Select the kernel you want to boot from the GRUB menu. Press e to edit the boot options. Then, select the line that contains the kernel boot parameters and hit e again. Edit the line to your satisfaction, then hit enter. When you're done, hit b to boot. These changes will only take effect for the current boot, so if you mess something up, a reboot will revert your changes.
不过,我不知道如何编写,怕出错了连windows也进不了了.
请朋友们把自己的Grub menu发上来,我参照者写
在线等
接决方法如下:
Select the kernel you want to boot from the GRUB menu. Press e to edit the boot options. Then, select the line that contains the kernel boot parameters and hit e again. Edit the line to your satisfaction, then hit enter. When you're done, hit b to boot. These changes will only take effect for the current boot, so if you mess something up, a reboot will revert your changes.
不过,我不知道如何编写,怕出错了连windows也进不了了.
请朋友们把自己的Grub menu发上来,我参照者写
在线等
- juanzhewudi
- 帖子: 1114
- 注册时间: 2006-01-19 11:55
- 来自: HUST
- 联系:
这是临时改变grub的,不会写入到配置文件,放心。
我贴一下吧:
## ## End Default Options ##
title Ubuntu, kernel 2.6.15-28-k7
root (hd0,2)
kernel /boot/vmlinuz-2.6.15-27-k7 root=/dev/hdc3 ro quiet splash
initrd /boot/initrd.img-2.6.15-27-k7
savedefault
boot
title Ubuntu, kernel 2.6.15-28-k7 (recovery mode)
root (hd0,2)
kernel /boot/vmlinuz-2.6.15-28-k7 root=/dev/hdc3 ro single
initrd /boot/initrd.img-2.6.15-28-k7
boot
title Ubuntu Feisty newest
root (hd0,11)
kernel /boot/vmlinuz-2.6.20-10-generic root=/dev/hdc12 ro quiet splash
initrd /boot/initrd.img-2.6.20-10-generic
savedefault
boot
title Ubuntu Feisty
root (hd0,11)
kernel /boot/vmlinuz-2.6.20-9-generic root=/dev/hdc12 ro quiet splash vga=795
initrd /boot/initrd.img-2.6.20-9-generic
savedefault
boot
title Ubuntu Feisty(recovery mode)
root (hd0,11)
kernel /boot/vmlinuz-2.6.20-6-generic root=/dev/hdc12 ro single
initrd /boot/initrd.img-2.6.20-6-generic
boot
title Ubuntu, memtest86+
root (hd0,11)
kernel /boot/memtest86+.bin
boot
### END DEBIAN AUTOMAGIC KERNELS LIST
我贴一下吧:
## ## End Default Options ##
title Ubuntu, kernel 2.6.15-28-k7
root (hd0,2)
kernel /boot/vmlinuz-2.6.15-27-k7 root=/dev/hdc3 ro quiet splash
initrd /boot/initrd.img-2.6.15-27-k7
savedefault
boot
title Ubuntu, kernel 2.6.15-28-k7 (recovery mode)
root (hd0,2)
kernel /boot/vmlinuz-2.6.15-28-k7 root=/dev/hdc3 ro single
initrd /boot/initrd.img-2.6.15-28-k7
boot
title Ubuntu Feisty newest
root (hd0,11)
kernel /boot/vmlinuz-2.6.20-10-generic root=/dev/hdc12 ro quiet splash
initrd /boot/initrd.img-2.6.20-10-generic
savedefault
boot
title Ubuntu Feisty
root (hd0,11)
kernel /boot/vmlinuz-2.6.20-9-generic root=/dev/hdc12 ro quiet splash vga=795
initrd /boot/initrd.img-2.6.20-9-generic
savedefault
boot
title Ubuntu Feisty(recovery mode)
root (hd0,11)
kernel /boot/vmlinuz-2.6.20-6-generic root=/dev/hdc12 ro single
initrd /boot/initrd.img-2.6.20-6-generic
boot
title Ubuntu, memtest86+
root (hd0,11)
kernel /boot/memtest86+.bin
boot
### END DEBIAN AUTOMAGIC KERNELS LIST