[问题]Ubuntu里面刷新率没有100赫兹概念的???
版面规则
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
-
- 帖子: 58
- 注册时间: 2005-04-08 22:25
- 来自: 江苏-南京
[问题]Ubuntu里面刷新率没有100赫兹概念的???
显示器是三星19寸 型号是945MBi
windows下面1024 768 可以刷100
但为什么ubuntu里面却说超出范围,然后黑屏???
大家看看我的config , 看看如何修改为100HZ 谢谢了!
我显示器说明书上写:
水平扫描频率 30-85KHZ
垂直扫描频率 50-160HZ
下面是我现在85HZ的config,怎么改,能刷到100呢???
先谢谢了!!!!!!!!!
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,bg"
Option "XkbVariant" ","
Option "XkbOptions" "grp:alt_shift_toggle,lv3:ralt_switch,grp_led:scroll"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV20 [GeForce3 Ti 500]"
Driver "nv"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "SyncMaster"
Option "DPMS"
HorizSync 30-85
VertRefresh 50-160
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV20 [GeForce3 Ti 500]"
Monitor "SyncMaster"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"Section "Device"
Identifier "NVIDIA Corporation NV20 [GeForce3 Ti 500]"
Driver "nv"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "SyncMaster"
Option "DPMS"
HorizSync 30-85
VertRefresh 50-160
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV20 [GeForce3 Ti 500]"
Monitor "SyncMaster"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Mode 0666
EndSection
windows下面1024 768 可以刷100
但为什么ubuntu里面却说超出范围,然后黑屏???
大家看看我的config , 看看如何修改为100HZ 谢谢了!
我显示器说明书上写:
水平扫描频率 30-85KHZ
垂直扫描频率 50-160HZ
下面是我现在85HZ的config,怎么改,能刷到100呢???
先谢谢了!!!!!!!!!
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,bg"
Option "XkbVariant" ","
Option "XkbOptions" "grp:alt_shift_toggle,lv3:ralt_switch,grp_led:scroll"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV20 [GeForce3 Ti 500]"
Driver "nv"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "SyncMaster"
Option "DPMS"
HorizSync 30-85
VertRefresh 50-160
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV20 [GeForce3 Ti 500]"
Monitor "SyncMaster"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"Section "Device"
Identifier "NVIDIA Corporation NV20 [GeForce3 Ti 500]"
Driver "nv"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "SyncMaster"
Option "DPMS"
HorizSync 30-85
VertRefresh 50-160
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV20 [GeForce3 Ti 500]"
Monitor "SyncMaster"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Mode 0666
EndSection
- yysq009
- 帖子: 2682
- 注册时间: 2007-01-28 23:00
- 来自: @江西|南昌@
- 联系:
-
- 帖子: 67
- 注册时间: 2006-02-17 1:50
- stlxv
- 论坛版主
- 帖子: 8275
- 注册时间: 2006-05-03 0:39
- 来自: المريخ
- woodlinux
- 帖子: 158
- 注册时间: 2006-07-15 7:29
- 来自: 宁波北仑
- 联系:
可以通过以下命令设置自己想要的刷新频率:
sudo gtf 1027 768 100
(水平扫描频率 30-85KHZ 垂直扫描频率 50-160HZ )
再修改以下文件:
sudo gedit /etc/X11/xorg.conf
修改monitor中如下:
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 30.0 - 85
VertRefresh 50 - 160
Modeline "1024x768_100.00" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
Option "DPMS"
EndSection
安装私有显卡nvidia驱动
请先确保 您的 apt 源里有 main restricted universe multiverse 仓库, 因为 nvidia/ati 私有显卡驱动在 restricted 仓库里
* - 对于 nvidia 显卡,可以这样安装 nvidia 私有 glx 驱动:
sudo apt-get install nvidia-glx
sudo nvidia-xconfig
sudo depmod -a ; sudo modprobe nvidia
( 6.10
sudo apt-get install nvidia-glx
sudo nvidia-glx-config enable
然后按Ctrl+Alt+退格键 重启X或者重启电脑)
- 对于 ati 显卡,可以这样安装 ati 私有 fglrx 驱动:
sudo apt-get install xorg-driver-fglrx fglrx-control
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
sudo depmod -a ; sudo modprobe fglrx
sudo gtf 1027 768 100
(水平扫描频率 30-85KHZ 垂直扫描频率 50-160HZ )
再修改以下文件:
sudo gedit /etc/X11/xorg.conf
修改monitor中如下:
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 30.0 - 85
VertRefresh 50 - 160
Modeline "1024x768_100.00" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
Option "DPMS"
EndSection
安装私有显卡nvidia驱动
请先确保 您的 apt 源里有 main restricted universe multiverse 仓库, 因为 nvidia/ati 私有显卡驱动在 restricted 仓库里
* - 对于 nvidia 显卡,可以这样安装 nvidia 私有 glx 驱动:
sudo apt-get install nvidia-glx
sudo nvidia-xconfig
sudo depmod -a ; sudo modprobe nvidia
( 6.10
sudo apt-get install nvidia-glx
sudo nvidia-glx-config enable
然后按Ctrl+Alt+退格键 重启X或者重启电脑)
- 对于 ati 显卡,可以这样安装 ati 私有 fglrx 驱动:
sudo apt-get install xorg-driver-fglrx fglrx-control
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
sudo depmod -a ; sudo modprobe fglrx
-
- 帖子: 40
- 注册时间: 2006-08-25 23:06
- shadowson
- 帖子: 65
- 注册时间: 2007-04-15 18:46
-
- 帖子: 30
- 注册时间: 2007-08-15 17:01
我和楼主遇到一样的问题,希望高手们能帮助下,
代码: 全选
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder3) Thu Nov 9 17:56:12 PST 2006
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "PHILIPS 107S5"
HorizSync 30.0 - 85.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce4 MX 440 with AGP8X"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "1024x768_75 +0+0; 1280x1024 +0+0; 1152x864 +0+0; 1024x768 +0+0; 832x624 +0+0; 800x600 +0+0; 720x400 +0+0; 640x480 +0+0; 640x350 +0+0"
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
-
- 帖子: 30
- 注册时间: 2007-08-15 17:01