安装linux-686出问题了

OOo,TeX,KO,ABI,GIMP,Picasa,ProE,QCAD,Inkscape,Kicad,Eagle
回复
bravehao
帖子: 105
注册时间: 2005-10-11 11:15

安装linux-686出问题了

#1

帖子 bravehao » 2005-10-17 16:33

安装,结果每次都是死机,差不多安装到80%左右,强制关机,无法正确启动,修复过后能进入了,但是问题来了,每次用apt-get命令装完其它的东西,它就会自动安装这个linux-686

显示的是
1 not fully installed or removed.
有一个包未完全安装,然后就开始装
有什么命令完全删掉它呢?
头像
eexpress
帖子: 58428
注册时间: 2005-08-14 21:55
来自: 长沙

#2

帖子 eexpress » 2005-10-17 16:34

有个根子在吧。purge掉先。apt-get purge
● 鸣学
bravehao
帖子: 105
注册时间: 2005-10-11 11:15

#3

帖子 bravehao » 2005-10-17 16:46

用apt-get --purge linux-686出现
E: Invalid operation linux-686

用apt-get clean

用过apt-get clean之后,运行dpkg --configure -a
之后出现以下
Setting up linux-image-2.6.12-9-686 (2.6.12-9.23) ...
按Ctrl+C
There was a problem running depmod. This may be benign,
(You may have versioned symbol names, for instance).
Or this could be an error.
depmod exited with return value 0
depmod got a signal 2
Since this image uses initrd, I am not deleting the file
/lib/modules/2.6.12-9-686/modules.dep. However, there is no
guarantee that the file is valid. I would strongly advice
you to either abort and fix the errors in depmod, or
regenerate the initrd image with a known good modules.dep
file. I repeat, an initrd kernel image with a bad modules.dep
shall fail to boot.
Would you like to abort now? [No] y
dpkg: error processing linux-image-2.6.12-9-686 (--configure):
subprocess post-installation script returned error exit status 1
Errors were encountered while processing:
linux-image-2.6.12-9-686
头像
内存不足
论坛版主
帖子: 3277
注册时间: 2005-08-18 18:43
联系:

#4

帖子 内存不足 » 2005-10-17 16:55

apt-get -f install
修复一下依赖关系再更新看看
໌→ iCookie Gtk Theme
໌→DropPlusBluetheme
กรัก กรัก`菠萝
头像
eexpress
帖子: 58428
注册时间: 2005-08-14 21:55
来自: 长沙

#5

帖子 eexpress » 2005-10-17 16:58

--purge前面加install, remove主命令才行。直接到新立得彻底删除算了。一样的。
● 鸣学
bravehao
帖子: 105
注册时间: 2005-10-11 11:15

#6

帖子 bravehao » 2005-10-17 17:00

内存不足 写了:apt-get -f install
修复一下依赖关系再更新看看

运行之后,它又开始安装了
1 not fully installed or removed.
Need to get 0B of archives.
After unpacking 0B of additional disk space will be used.
Setting up linux-image-2.6.12-9-686 (2.6.12-9.23) ...
头像
eexpress
帖子: 58428
注册时间: 2005-08-14 21:55
来自: 长沙

#7

帖子 eexpress » 2005-10-17 17:02

试试我说的
● 鸣学
bravehao
帖子: 105
注册时间: 2005-10-11 11:15

#8

帖子 bravehao » 2005-10-17 17:03

eexpress 写了:--purge前面加install, remove主命令才行。直接到新立得彻底删除算了。一样的。
sudo apt-get remove --purge linux-686
出现
Package linux-686 is not installed, so not removed
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
1 not fully installed or removed.
Need to get 0B of archives.
After unpacking 0B of additional disk space will be used.
Setting up linux-image-2.6.12-9-686 (2.6.12-9.23) ...

然后。。。唉,又开始安装了。。。。

新立得里面这个包没安装,所以也根本没有删除指令
回复