VMware Tools 怎么安装啊?

系统安装、升级讨论
版面规则
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
回复
weifnh
帖子: 8
注册时间: 2007-04-05 21:57

VMware Tools 怎么安装啊?

#1

帖子 weifnh » 2007-04-07 15:16

我用硬盘安装UBUNTU6.10到最后一步搞不定了,就用VMware安装,装好了有要装VMware Tools,不知道怎么安装啊 ...
永恒不永恒
帖子: 124
注册时间: 2007-03-17 18:57
来自: 广东广州

#2

帖子 永恒不永恒 » 2007-04-07 15:40

这个问题其实比较简单。
首先,你要在vmware的菜单栏中,有个“VM”子菜单,选择它。
然后你就会看到有个叫“Install Vmware Tools”的,继续选择它。
这个时候,你就会得到通知,说vmware tools光盘加载了。
然后回到你的ubuntu desktop里面,点击光盘图标,desktop应该会自动加载光盘。好了,看到光盘里面有2个文件了吧,一个是类似“VMware tools-5.xx.x.x.rpm”的rpm文件,一个是类似“VMware tools-5.x.taz.gz”的压缩文件。
其实这2个文件都是一样的,不过前者是已经打包的可自动化安装驱动,后者是压缩打包的驱动源码。
如果想简单一点,你可以打开立得驱动管理界面,选择前面的rpm进行安装,可以一路顺利完成。(初学者建议使用)
如果稍微懂得一点基础的话,也可以自己解包后面的那个压缩文件自行学着手动给linux安装驱动。
还不明白,就上网搜索一下,以“linux 安装 vmware tools”为关键字,会找到很多的..
我用ubuntu 6.06,gnome桌面~
结果装个qBittorrent搞不定,
然后就换到ubuntu 7.04了..同样是gnome桌面~
定制才是王道!
cortez
帖子: 5
注册时间: 2006-08-25 0:55

#3

帖子 cortez » 2007-04-08 4:08

多谢了!我一直以为 VMware tools-5.x.taz.gz 才是安装包.老是安不上.这次知道了!谢谢了
cortez
帖子: 5
注册时间: 2006-08-25 0:55

#4

帖子 cortez » 2007-04-08 5:10

为什么我用软件管理器安装显示说 这个软件包以损坏.或者您不允许打开文件.请检查文件的权限 啊
eclipse_java
帖子: 5
注册时间: 2007-04-08 10:13

#5

帖子 eclipse_java » 2007-04-08 17:03

wo de nage guangpan li meiyou a
why ?
eclipse_java
帖子: 5
注册时间: 2007-04-08 10:13

#6

帖子 eclipse_java » 2007-04-09 18:47

我点了那个VM下面大安装
也有了个盘
可是盘里面没有你说的文件啊>?
高手怎么回事啊?
头像
jznhljg
帖子: 36
注册时间: 2008-08-21 3:42

#7

帖子 jznhljg » 2008-08-26 22:19

Install VMware Tools from the Command Line with the Tar or RPM Installer
Before you begin, make sure the virtual machine is powered on and the guest operating system is running.
To install VMware Tools from the command line with the tar or RPM installer
1 On the host, choose VM > Install VMware Tools.

2 On the guest, log in as root (su -).

3 If necessary, mount the VMware Tools virtual CD-ROM image by entering a command similar to the following:

mount /dev/cdrom /mnt/cdrom
Some Linux distributions automatically mount CD-ROMs. If your distribution uses automounting, you can skip this step.
Some Linux distributions use different device names or organize the /dev directory differently. If your CD-ROM drive is not /dev/cdrom or if the mount point for a CD-ROM is not /mnt/cdrom, modify the command to reflect the conventions used by your distribution.
4 Change to a working directory by entering a command such as the following:

cd /tmp
5 If a previous installation exists, delete the previous vmware-tools-distrib directory before installing.

The location of this directory depends on where you placed it during the previous installation. Often it is placed in:
/tmp/vmware-tools-distrib
6 Run the installer and unmount the CD-ROM image.

Depending on whether you are using the tar installer or the RPM installer, do one of the following:
• For the tar installer, at the command prompt, enter:

tar zxpf /mnt/cdrom/VMwareTools-<xxxx>.tar.gz
umount /dev/cdrom
Where <xxxx> is the build number of the product release.
• For the RPM installer, at the command prompt, enter:

rpm -Uhv /mnt/cdrom/VMwareTools-<xxxx>.i386.rpm
umount /dev/cdrom
Where <xxxx> is the build number of the product release.
If your Linux distribution automatically mounted the CD-ROMs, you do not need to use the unmount portion of the command.
If you attempt to install an RPM installation over a tar installation or the reverse, the installer detects the previous installation and must convert the installer database format before continuing.
7 Configure VMware Tools.

Depending on whether you are using the tar installer or the RPM installer, do one of the following:
• For the tar installer, enter the following commands to run the installer:

cd vmware-tools-distrib
./vmware-install.pl
Respond to the questions the command-line wizard displays on the screen. Press Enter to accept the default value. The configuration file, vmware-config-tools.pl, runs after the installer file finishes running.
• For the RPM installer, enter the following command to run the configuration file:

vmware-config-tools.pl
Respond to the questions the command-line wizard displays on the screen. Press Enter to accept the default value.
8 Log out of the root account.

exit
回复