有哪个好心人来贴份7.04的menu.lst

[chinabiue]

有哪个好心人来贴份7.04的menu.lst,给我参考一下..帮帮忙.
谁帖我就认谁为老大了.

[dogal]

直接用FIND MUNU。LST就可以了，

[dogal]

不用贴的，查找就可以了，
或在boot/grub里就有了，

[xport]

不用贴的，查找就可以了，
或在boot/grub里就有了，

楼主会杀了你的，估计楼主自己升级的时候改menu.lst出了问题了吧？

我放一个出来好了：[xport@ubuntu ~] $ cat /boot/grub/menu.lst

代码： 全选

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default         0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout         3

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title         Windows 95/98/NT/2000
# root          (hd0,0)
# makeactive
# chainloader   +1
#
# title         Linux
# root          (hd0,1)
# kernel        /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=a1e46fc1-6b30-468c-9e1c-f855f9171398 ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## ## End Default Options ##

title           Ubuntu, kernel 2.6.20-15-generic
root            (hd0,0)
kernel          /vmlinuz-2.6.20-15-generic root=UUID=a1e46fc1-6b30-468c-9e1c-f855f9171398 ro quiet splash
initrd          /initrd.img-2.6.20-15-generic
quiet
savedefault

title           Ubuntu, kernel 2.6.20-15-generic (recovery mode)
root            (hd0,0)
kernel          /vmlinuz-2.6.20-15-generic root=UUID=a1e46fc1-6b30-468c-9e1c-f855f9171398 ro single
initrd          /initrd.img-2.6.20-15-generic

title           Ubuntu, memtest86+
root            (hd0,0)
kernel          /memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

[skyboy]

授人以鱼，不如授人以渔

还是说清楚点

title Ubuntu, kernel 2.6.20-15-generic
root (hd0,0)
kernel /vmlinuz-2.6.20-15-generic root=UUID=a1e46fc1-6b30-468c-9e1c-f855f9171398 ro quiet splash
initrd /initrd.img-2.6.20-15-generic
quiet
savedefault

title那行，是在grub引导菜单里显示的文字
第二行，是/boot所在的分区。
第三行，是/boot目录下的vmlinz文件。 后面的root＝后面是根目录所在位置。
因为ubuntu 7.04有把ide硬盘当成scsi的bug，所以建议使用uuid，像楼上那样。
可以使用 ls -l /dev/disk/by-uuid 来得到每个分区的uuid。
initrd那行则是相应的initrd.img文件

[chinabiue]

知道了.楼上两位就分别是我大哥和二哥了.以后要是有什么事.叫一声,小弟赴汤蹈火,在所不辞!

[xiehuoli]

知道了.楼上两位就分别是我大哥和二哥了.以后要是有什么事.叫一声,小弟赴汤蹈火,在所不辞!

这也行??

[chinabiue]

谁帖我就认谁为老大了.

我就是这样说的.

[依寻依然]

谁帖我就认谁为老大了.

我就是这样说的.

这年头……

[applnk]

谁帖我就认谁为老大了.

我就是这样说的.

这样的小弟老大用着也不放心啊！太容易叛变了。

[dogal]

难道/BOOT/GRUB里没有吗？

[chinabiue]

你不知.我装LINUX从来不装GRUB...全是自己写.然后把GRUB搞在WINXP下.那样就不用重写MBR了.

[xhy]

看我的

default 1

timeout 10

color white/blue white/brown

password --md5 $1$VVpSv1$ZOhhZGjD0C6KBdwh3fodY1

title Feisty
root (hd0,0)
kernel /boot/vmlinuz-2.6.20-14-generic root=/dev/sda8 ro quiet splash noapic
initrd /boot/initrd.img-2.6.20-14-generic
boot

title Gentoo
root (hd0,0)
kernel /vmlinuz-2.6.19-gentoo-r5 root=/dev/sda7 noapic
boot

[fallleaf]

楼上的grub没有单用户模式啊，这样貌似不是很好。

[xhy]

单用户模式对我没有什么意义
使用Linux到现在 只是尝试性的进去过一次而已


如果想进去
可以直接#init 1