ubuntu12.04挂起,恢复后无线无法连接。重启后可以连接。
版面规则
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
- qq420100523
- 帖子: 1684
- 注册时间: 2009-07-31 18:56
- 系统: windows、ubuntu
- 来自: 广东阳江
- qy117121
- 论坛版主
- 帖子: 50546
- 注册时间: 2007-12-14 13:40
- 系统: Winbuntu
- 来自: 志虚国乌由市
- 联系:
Re: ubuntu12.04挂起,恢复后无线无法连接。重启后可以连接。
重启下 network-manager服务试试
渠月 · QY
本人只会灌水,不负责回答问题
无聊可以点一下→ http://u.nu/ubuntu
Ubuntu 20.04 快速设置指南,请配合浏浏览器自动翻译使用
邮箱 chuan@ubuntu.org.cn
本人只会灌水,不负责回答问题
无聊可以点一下→ http://u.nu/ubuntu
Ubuntu 20.04 快速设置指南,请配合浏浏览器自动翻译使用
邮箱 chuan@ubuntu.org.cn
-
- 帖子: 418
- 注册时间: 2008-09-06 2:00
Re: ubuntu12.04挂起,恢复后无线无法连接。重启后可以连接。
恢复后看看
ip link 的输出
ip link 的输出
- qq420100523
- 帖子: 1684
- 注册时间: 2009-07-31 18:56
- 系统: windows、ubuntu
- 来自: 广东阳江
Re: ubuntu12.04挂起,恢复后无线无法连接。重启后可以连接。
试过了,还是不行。qy117121 写了:重启下 network-manager服务试试
- qq420100523
- 帖子: 1684
- 注册时间: 2009-07-31 18:56
- 系统: windows、ubuntu
- 来自: 广东阳江
Re: ubuntu12.04挂起,恢复后无线无法连接。重启后可以连接。
soiamso 写了:恢复后看看
ip link 的输出
代码: 全选
sunshine@suhshine:~$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN mode DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT qlen 1000
link/ether 00:23:5a:8a:97:31 brd ff:ff:ff:ff:ff:ff
3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DORMANT qlen 1000
link/ether 00:1e:65:e8:8e:70 brd ff:ff:ff:ff:ff:ff
sunshine@suhshine:~$
-
- 帖子: 418
- 注册时间: 2008-09-06 2:00
Re: ubuntu12.04挂起,恢复后无线无法连接。重启后可以连接。
根据输出驱动没有问题
然后参考
https://wiki.archlinux.org/index.php/Wi ... management
Manual Setup 部分至 Access point discovery 部分
然后参考
https://wiki.archlinux.org/index.php/Wi ... management
Manual Setup 部分至 Access point discovery 部分
qq420100523 写了:soiamso 写了:恢复后看看
ip link 的输出代码: 全选
sunshine@suhshine:~$ ip link 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN mode DEFAULT link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT qlen 1000 link/ether 00:23:5a:8a:97:31 brd ff:ff:ff:ff:ff:ff 3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DORMANT qlen 1000 link/ether 00:1e:65:e8:8e:70 brd ff:ff:ff:ff:ff:ff sunshine@suhshine:~$
-
- 帖子: 80
- 注册时间: 2009-03-30 23:04
- 系统: Ubuntu 18.04 LTS
Re: ubuntu12.04挂起,恢复后无线无法连接。重启后可以连接。
编辑
/etc/default/acpi-support
找到
# Add services to this list to stop them before suspend and restart them in # the resume process.
STOP_SERVICES=""
改为
STOP_SERVICES="networking"
/etc/default/acpi-support
找到
# Add services to this list to stop them before suspend and restart them in # the resume process.
STOP_SERVICES=""
改为
STOP_SERVICES="networking"
- skcmm
- 帖子: 32
- 注册时间: 2013-03-08 0:26
- 系统: ubuntu(x64)
Re: ubuntu12.04挂起,恢复后无线无法连接。重启后可以连接。
感谢分享,解决了多年的难题