ATI显卡能在7.04上直接安装BERLY了吗?

[hanben2000]

装了UBUNTU 7.04
显卡是ATI 9550
不知道能不能装BERLY
能直接安装吗
还要不要装官方驱动

[冲浪板]

应该行，因为我的9200行。
就是不行装个啥也行-在hiweed下装的。

[信望爱]

不装受限驱动可以用beryl,但慢

[lty365]

我也是9550 7.04
两总方法装了 都没出3D桌面～是不是
/etc/X11/xorg.conf
/usr/share/applications/beryl-manager.desktop
没改的原因？

[Louis]

楼主看下你的3D加速有没有,终端运行

glxinfo | grep "direct rendering"
应该得到
direct rendering: Yes
有的话能用

我的9200SE,用系统自带的开源驱动,Beryl效果很不错

[lty365]

YES的
但 还是没3D桌面
把你的 BERLY 设置贴上来看看

[Louis]

YES的
但 还是没3D桌面
把你的 BERLY 设置贴上来看看

你Beryl 启动后窗口管理器里要选Beryl 才有3D 效果,不是Metacity.
Beryl 设置没什么特别的,基本都是默认的,主要还是显卡驱动的配置
我以前装6.10的时候ATi官方的驱动老是配置不好,认不出9200SE,3D加速打不开.用A卡的装Ubuntu就是郁闷阿.
7.04就用开源的驱动算了,也还不错.
Ubuntu7.04 ATi9200SE AIGLX 仅供参考,有些值要根据你自己的机器来的,注意备份原先xorg.conf

代码： 全选

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/fonts/X11/misc"
	FontPath	"/usr/share/fonts/X11/cyrillic"
	FontPath	"/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/Type1"
	FontPath	"/usr/share/fonts/X11/100dpi"
	FontPath	"/usr/share/fonts/X11/75dpi"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
	FontPath	"/usr/share/fonts/wenquanyi/wqy-bitmapfont/"
EndSection

Section "Module"
  Load "i2c"
  Load "bitmap"
  Load "ddc"
  Load "dri"
  Load "extmod"
  Load "freetype"
  Load "glx"
  Load "int10"
  Load "vbe"
  Load "dbe" 
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc104"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ExplorerPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"stylus"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"stylus"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"eraser"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"eraser"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"cursor"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"cursor"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"ATI Technologies Inc RV280 [Radeon 9200 SE]"
	Driver		"radeon"
	BusID		"PCI:1:0:0"
	VideoRam	65536
   Option "DRI" "true"
   Option "XAANoOffscreenPixmaps"
   Option "AGPFastWrite" "true"
   Option "DisableGLXRootClipping" "true"
   Option "AddARGBGLXVisuals" "true"
   Option "AllowGLXWithComposite" "true"
   Option "EnablePageFlip" "true"  
   Option "ColorTiling" "on"  
   Option "AccelMethod" "XAA"  
   Option "RenderAccel" "true" 
   Option "AGPMode" "8" 
   Option "UseFBDev"  "true"
EndSection

Section "Monitor"
	Identifier	"ArtMedia AS772E"
	Option		"DPMS""true"
	HorizSync	30-70
	VertRefresh	50-150
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies Inc RV280 [Radeon 9200 SE]"
	Monitor		"ArtMedia AS772E"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
   Option "AIGLX" "true"
   Identifier "Default Layout"
   Screen "Default Screen"
   InputDevice "Generic Keyboard"
   InputDevice "Configured Mouse"
   InputDevice "stylus" "SendCoreEvents"
   InputDevice "cursor" "SendCoreEvents"
   InputDevice "eraser" "SendCoreEvents"
EndSection 

Section "DRI"
	Mode	0666
EndSection

Section "Extensions" 
   Option "Composite" "Enable" 
EndSection

[lty365]

在 系统 系统管理 里 有一个受限驱动管理器 ATI图形加速驱动 把他装起来？

[stephenven]

我的也是9550，我装了官方的8.36版的驱动才能装上beryl

[liuluc]

请问楼上的怎么安装的官方驱动？我的也是
9550。运行
.sh /aaaa.run就出错。老是说bash找不到命令。

[大槛哥]

完全可以直接装beryl，不过速度就是个问题了，装了那个受限驱动就不能装了

[hsy541]

谁给个xgl+beryl阿
开源驱动实在垃圾！

[zgw3]

我也是装了受限驱动，但是还是没有办法打开berly

[omgkent]

我觉得只要不更新系统
先装beryl
就非常顺利了
之前失败了若干次，就因为更新

我也9550

[cheno]

我也是9550，昨天刚搞定了beryl，安装过程中GHOST过几次系统了｀｀
我没有安装系统那个受限制驱动，3D加速是“YES”。要修改xorg.conf的～安装好beryl之后，右键点击红宝石，在选择窗口管理器里选择beryl，就可以用了