以前觉得 声音 不好听，就从新安装了ALSA驱动
装完后 笔记本自带的 控制音量键 不能控制了， 界面里控制音量也没用，只能是双击打开音量控制
调节PCM才能 调整音量。 笔记本的音量键发现是调节耳机的。。界面上的也是！！！！
这样我很不方便 大虾 帮忙啊！！！！！
另外 我在快捷键里面想改，也没有用..我这个怪问题能解决吗？？？？
重新安装声卡驱动以后不能控制音量了！！！！
版面规则
我们都知道新人的确很菜，也喜欢抱怨，并且带有浓厚的Windows习惯，但既然在这里询问，我们就应该有责任帮助他们解决问题，而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享，以人为本，这正是Ubuntu的精神所在。
我们都知道新人的确很菜，也喜欢抱怨，并且带有浓厚的Windows习惯，但既然在这里询问，我们就应该有责任帮助他们解决问题，而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享，以人为本，这正是Ubuntu的精神所在。
-
七粒尘
- 帖子： 53
- 注册时间： 2007-04-17 17:34
- 联系：
-
xport
- 帖子： 1277
- 注册时间： 2006-05-19 21:23
- 联系：
-
yyuuttaaoo
- 帖子： 13
- 注册时间： 2007-08-03 21:24
Hi, I managed to fix this (was having the same problem as you) by following a tip on installing xbindkeys from an HOWTO in this forum http://ubuntuforums.org/showthread.php?t=79560.
But, to be more exact, this is what I did:
1 - Deleted gnome's keybindings for the mute, increase volume and decrease volume. Did this by clicking in the Shortcut column of the gnome-keybinding-properties window respective to these three actions, then pressing backspace.
2 - Installed xbindkeys and its gui configuration utility:
sudo apt-get install xbindkeys xbindkeys-config
3 - Executed this:
xbindkeys --defaults > /home/eduardo/.xbindkeysrc
Don't know if this is strictly necessary.
4 - Ran xbindkeys and xbindkeys-config
xbindkeys
xbindkeys-config
5 - In the configuration window of xbindkeys-config delete the pre-existent keybindings (unless you want to keep any, like the Ctrl+Shift+q , which looks handy, since it shows the configured keybindings at any time) .
6 - Press the button "New" to create a new keybinding, and on the right, you can name it, choose what key to use (use the Get Key button then press the combination of keys you want, and it will capture it for you), and choose the command to run.
These are the ones I created:
Name: Mute
Action: amixer sset PCM toggle
Name: Increase volume
Action: amixer sset PCM 1+ unmute
Name: Decrease volume
Action: amixer sset PCM 1- unmute
7 - File -> Save to default File
8 - You can already test it!
9 - Add "xbindkeys" to Gnome-session Startup applications so it always runs when you enter Gnome.
But, to be more exact, this is what I did:
1 - Deleted gnome's keybindings for the mute, increase volume and decrease volume. Did this by clicking in the Shortcut column of the gnome-keybinding-properties window respective to these three actions, then pressing backspace.
2 - Installed xbindkeys and its gui configuration utility:
sudo apt-get install xbindkeys xbindkeys-config
3 - Executed this:
xbindkeys --defaults > /home/eduardo/.xbindkeysrc
Don't know if this is strictly necessary.
4 - Ran xbindkeys and xbindkeys-config
xbindkeys
xbindkeys-config
5 - In the configuration window of xbindkeys-config delete the pre-existent keybindings (unless you want to keep any, like the Ctrl+Shift+q , which looks handy, since it shows the configured keybindings at any time) .
6 - Press the button "New" to create a new keybinding, and on the right, you can name it, choose what key to use (use the Get Key button then press the combination of keys you want, and it will capture it for you), and choose the command to run.
These are the ones I created:
Name: Mute
Action: amixer sset PCM toggle
Name: Increase volume
Action: amixer sset PCM 1+ unmute
Name: Decrease volume
Action: amixer sset PCM 1- unmute
7 - File -> Save to default File
8 - You can already test it!
9 - Add "xbindkeys" to Gnome-session Startup applications so it always runs when you enter Gnome.