用光盘安装,按下Start or install Ubuntu后
不久出现
BusyBox v1.01 (Debian 1:1.01-4ubuntu3) Built-in shell (ash)
/bin/sh: can't access tty; job control turned off
网络上搜索了无数次,发现出现这种问题的人很多,但是解决办法一个都没有,连外国网站上都没有!
可恶我有点火大了,这么严重的问题UBUNTU的开发人员竟然不给出个解决方案
可怜了我的新笔记本要忍受VISTA的折磨!
看来世上是没人能够解决这个问题了吧
版面规则
我们都知道新人的确很菜，也喜欢抱怨，并且带有浓厚的Windows习惯，但既然在这里询问，我们就应该有责任帮助他们解决问题，而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享，以人为本，这正是Ubuntu的精神所在。
我们都知道新人的确很菜，也喜欢抱怨，并且带有浓厚的Windows习惯，但既然在这里询问，我们就应该有责任帮助他们解决问题，而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享，以人为本，这正是Ubuntu的精神所在。
-
yueguang14
- 帖子： 55
- 注册时间： 2007-06-13 9:45
-
salltm
- 帖子： 357
- 注册时间： 2006-10-18 16:17
-
bluepeng
- 帖子： 343
- 注册时间： 2007-04-02 14:35
-
yueguang14
- 帖子： 55
- 注册时间： 2007-06-13 9:45
-
wen1987
- 帖子： 88
- 注册时间： 2007-07-04 21:54
-
wen1987
- 帖子： 88
- 注册时间： 2007-07-04 21:54
我帮你google了一下，这个帖子可能有用
http://ubuntuforums.org/showthread.php? ... orkarounds
有以下几种解决方案：
"Can't access tty"
https://bugs.launchpad.net/ubuntu/+s...20/+bug/106864
There was a "fsck failed, see /var/log/checkfs" buried in the middle of the messages that roar up the screen. My interpretation, the bug came in when hard drive code was changed to support both IDE and SATA. Along with this came change of device name from hda to sda, complex UUID's, and all that. fsck failed to process the IDE hard drive.
My fix: put in an extra cable to put the IDE hard drive on IDE2, while the CDROM is on IDE1. Ubuntu booted right up, no "can't access tty" errors.
Ben Collins said on 2007-04-18: (permalink)
The quick workaround for this on an installed system is to add "piix" to /etc/initramfs-tools/modules, and run "sudo update-initramfs -u"
For installing a system, add break=top to the kernel cmdline via the bootgfx menu. Once at a busybox prompt, run "modprobe piix". Then "exit" the shell. Once the system is installed, the above work around will also be needed.
From another post in bug 106864: Adding piix in /etc/initramfs-tools/modules allowed to advance more in the
startup but the kernel was not able to finish the startup. I've added this in /etc/initramfs-tools/modules:
piix
i2c_piix4
i2c_core
Now the problem is solved in my system.
Another user report on [Bug 106864] Re: Feisty boot fail "can't access tty" IDE SATA problem:
"...then i found this Edgy bugreport:
https://bugs.launchpad.net/ubuntu/+s...ols/+bug/67256
thanks to this, edgy booted. i tried doing the same on feisty:
$ sudo update-initramfs -u -k 2.6.20-15-generic
and after rebooting everything worked fine!"
http://ubuntuforums.org/showthread.php? ... orkarounds
有以下几种解决方案：
"Can't access tty"
https://bugs.launchpad.net/ubuntu/+s...20/+bug/106864
There was a "fsck failed, see /var/log/checkfs" buried in the middle of the messages that roar up the screen. My interpretation, the bug came in when hard drive code was changed to support both IDE and SATA. Along with this came change of device name from hda to sda, complex UUID's, and all that. fsck failed to process the IDE hard drive.
My fix: put in an extra cable to put the IDE hard drive on IDE2, while the CDROM is on IDE1. Ubuntu booted right up, no "can't access tty" errors.
Ben Collins said on 2007-04-18: (permalink)
The quick workaround for this on an installed system is to add "piix" to /etc/initramfs-tools/modules, and run "sudo update-initramfs -u"
For installing a system, add break=top to the kernel cmdline via the bootgfx menu. Once at a busybox prompt, run "modprobe piix". Then "exit" the shell. Once the system is installed, the above work around will also be needed.
From another post in bug 106864: Adding piix in /etc/initramfs-tools/modules allowed to advance more in the
startup but the kernel was not able to finish the startup. I've added this in /etc/initramfs-tools/modules:
piix
i2c_piix4
i2c_core
Now the problem is solved in my system.
Another user report on [Bug 106864] Re: Feisty boot fail "can't access tty" IDE SATA problem:
"...then i found this Edgy bugreport:
https://bugs.launchpad.net/ubuntu/+s...ols/+bug/67256
thanks to this, edgy booted. i tried doing the same on feisty:
$ sudo update-initramfs -u -k 2.6.20-15-generic
and after rebooting everything worked fine!"
Study or die.
-
yueguang14
- 帖子： 55
- 注册时间： 2007-06-13 9:45
-
utnubudnai
- 帖子： 53
- 注册时间： 2007-06-20 15:45