本人电脑主板集成Realtek ALC655声卡,在BIOS中己禁用该设备
主板上插有一块创新Ensoniq AudioPCI声卡
现在的问题是有时候重起,系统会检测到Realtek ALC655声卡,而导致系统无声,有时候又是Ensoniq AudioPCI,这时候又有声音。
这是在alsamixer下的得到的信息,以及系统硬件信息
还有这个,识别了两块声卡
varrily@Varrily-Ubuntu:~$ cat /proc/asound/cards
0 [AudioPCI ]: ENS1371 - Ensoniq AudioPCI
Ensoniq AudioPCI ENS1371 at 0xe000, irq 20
1 [V8237 ]: VIA8237 - VIA 8237
VIA 8237 with ALC655 at 0x1000, irq 21
难道UBUNTU能使用已禁用的设备??我该如何才能让系统只识别Ensoniq AudioPCI声卡???
[问题]好奇怪的现象,越权查找硬件,导致系统无声
- Varrily
- 帖子: 929
- 注册时间: 2007-06-21 12:31
- 联系:
- Varrily
- 帖子: 929
- 注册时间: 2007-06-21 12:31
- 联系:
- Varrily
- 帖子: 929
- 注册时间: 2007-06-21 12:31
- 联系:
郁闷,没人理我~~
自己找~
I fixed my Ensoniq 1371 issue buy doing the following:
(please use do not make these changes if your not comfortable doing so)
1. You'll need to edit the “modules” file thru a terminal window.
2. Start you terminal window
3. Once at the flashing prompt type:
4. cd /etc
5. then type
6. sudo nano modules (when asked for the root password please enter it)
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
lp
psmouse
7. now move your blinking courser to the line just below the list line mine is “psmouse”, yours could be different. then type in “snd-ens1371”, your modules file should look similar to mine:
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
lp
psmouse
snd-ens1371
8. To exit and save please do the following:
* Crtl-O
* You'll be asked: “File Name to Write: modules”; just hit the "enter" key.
* next you should see “[ Wrote 9 lines ]”
9. Now it Ctrl-X to exit GNU nano
10. Once that is done you should be back at “/etc$” prompt.
11. Now restart your computer. Once back in Ubuntu test your sound card.
Your sound card should work now, if you have speakers connected to your sound card you should hear the Ubuntu startup sounds. Please let me know if this works for you.
自己找~
I fixed my Ensoniq 1371 issue buy doing the following:
(please use do not make these changes if your not comfortable doing so)
1. You'll need to edit the “modules” file thru a terminal window.
2. Start you terminal window
3. Once at the flashing prompt type:
4. cd /etc
5. then type
6. sudo nano modules (when asked for the root password please enter it)
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
lp
psmouse
7. now move your blinking courser to the line just below the list line mine is “psmouse”, yours could be different. then type in “snd-ens1371”, your modules file should look similar to mine:
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
lp
psmouse
snd-ens1371
8. To exit and save please do the following:
* Crtl-O
* You'll be asked: “File Name to Write: modules”; just hit the "enter" key.
* next you should see “[ Wrote 9 lines ]”
9. Now it Ctrl-X to exit GNU nano
10. Once that is done you should be back at “/etc$” prompt.
11. Now restart your computer. Once back in Ubuntu test your sound card.
Your sound card should work now, if you have speakers connected to your sound card you should hear the Ubuntu startup sounds. Please let me know if this works for you.