怎么用ROOT权限啊
版面规则
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
-
- 帖子: 91
- 注册时间: 2005-06-05 19:00
- 来自: 浙江<<永康>>南京
怎么用ROOT权限啊
KDE控制中心的[Network Settings]里面配置IP地址、网关、DNS等
这得怎么弄啊
就是怎么进ROOT权限
我不知道怎么用啊
现在进去那里都是灰的
急啊
这得怎么弄啊
就是怎么进ROOT权限
我不知道怎么用啊
现在进去那里都是灰的
急啊
-
- 帖子: 91
- 注册时间: 2005-06-05 19:00
- 来自: 浙江<<永康>>南京
-
- 帖子: 3025
- 注册时间: 2005-05-07 23:57
- 联系:
-
- 帖子: 91
- 注册时间: 2005-06-05 19:00
- 来自: 浙江<<永康>>南京
-
- 帖子: 91
- 注册时间: 2005-06-05 19:00
- 来自: 浙江<<永康>>南京
-
- 帖子: 91
- 注册时间: 2005-06-05 19:00
- 来自: 浙江<<永康>>南京
-
- 帖子: 3025
- 注册时间: 2005-05-07 23:57
- 联系:
说清楚点。luchaoshuai 写了:这样子运行后出现的还是一样没用啊
没用是还是没有ROOT权限,还是网卡没用?你的网卡系统认出来了吗?
天呀,搞DHCP搞了这么久。好像我设过一回DHCP,在装系统时就已经搞定网络的了。
或者你先试一下叶兄的方法,先上能上网,搞定中文再从长计议吧。
oneleaf 写了:直接修改 /etc/network/interfaces
$ more /etc/network/interfaces代码: 全选
# This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # This is a list of hotpluggable network interfaces. # They will be activated automatically by the hotplug subsystem. mapping hotplug script grep map eth0 # The primary network interface iface eth0 inet dhcp
独自看一看大海
总想起身边走在路上的朋友
Lenovo E290-420[Celeron-M420/256M/60G/Intel GMA950]
总想起身边走在路上的朋友
Lenovo E290-420[Celeron-M420/256M/60G/Intel GMA950]
-
- 帖子: 91
- 注册时间: 2005-06-05 19:00
- 来自: 浙江<<永康>>南京
- carlos444_444
- 帖子: 448
- 注册时间: 2005-06-06 21:35
- 系统: Debian
- 来自: 四海为家
- 联系:
about root
when you start ubuntu, the grub menu will show you the choices, you can choice recovery mode and start system, then you can find out that you already in root mode,type "passwd",and you can change the root password to what you like,good luck!
I had installed the ubuntu linux, but I can not type chinese, hehe!
I had installed the ubuntu linux, but I can not type chinese, hehe!
-
- 帖子: 91
- 注册时间: 2005-06-05 19:00
- 来自: 浙江<<永康>>南京
- firehare
- 帖子: 2625
- 注册时间: 2005-04-10 16:54
- 来自: 温州大学
- 联系:
在/etc/network/interfaces文件中,类似下面的写法:luchaoshuai 写了:我在WINDOWS下可一用
IP 192.168.1.6
子网掩码 255.255.255.0
网关 192.168.1.1
DNS 192.168.1.1
上网
那在LINUX下的那个文件得怎么写才行啊
我在里面试了很久都没有希望啊
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# This is a list of hotpluggable network interfaces.
# They will be activated automatically by the hotplug subsystem.
mapping hotplug
script grep
map eth0
# The primary network interface
iface eth0 inet static
address 192.168.1.6
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
#如果你是宽带拨号的话,请将网关注释掉
gateway 192.168.1.1
# dns-* options are implemented by the resolvconf package, if installed
#下面是输入DNS服务器的IP地址和缺省搜索域名
dns-nameservers 192.168.1.1
dns-search xxx.org
auto eth0
修改你的resolv.conf文件:
search xxx.org
nameserver 192.168.1.1
我心无畏,源自于我心无知。
-
- 帖子: 91
- 注册时间: 2005-06-05 19:00
- 来自: 浙江<<永康>>南京
-
- 帖子: 91
- 注册时间: 2005-06-05 19:00
- 来自: 浙江<<永康>>南京
- firehare
- 帖子: 2625
- 注册时间: 2005-04-10 16:54
- 来自: 温州大学
- 联系: