什么时才有HP LaserJet 1020激光打印机驱动呢?(这是新品)今天才买了没装上
-
- 帖子: 76
- 注册时间: 2005-08-24 17:34
什么时才有HP LaserJet 1020激光打印机驱动呢?(这是新品)今天才买了没装上
现目前只能在xp里才能用
-
- 帖子: 27
- 注册时间: 2005-06-16 5:29
安装hp1020打印机
来自: http://ubuntuforums.org/showthread.php?p=483600
1. 安装驱动程序:
2.下载补丁:
http://support.ideainformatica.com/hplj ... hed.tar.gz
3. 安装补丁:
4. 修改文件:
找到含有1020的那一行,找到:
修改为:
5. 安装udev文件:
6. 重启udev
现在可以听到打印机运作的声音
When you power cycle the printer you should hear it whirring as it powers, then whirring again as the new firmware is uploaded.
To check the firmware is in look at /var/log/messages - -there should be some note of successful upload of firmware.
7. 重启 cupsys
8. I also found it necessary to install "cupsys-bsd" to get the cups versions of "lpr lpq" etc, and also :-
来自: http://ubuntuforums.org/showthread.php?p=483600
1. 安装驱动程序:
代码: 全选
sudo apt-get install foo2zjs
http://support.ideainformatica.com/hplj ... hed.tar.gz
3. 安装补丁:
代码: 全选
tar zxvf foo2zjs-patched.tar.gz
cd foo2zjs
make
sudo make install
代码: 全选
vim 58-foo2zjs.rules
代码: 全选
SYSFS{idProduct}=="2B17"
代码: 全选
SYSFS{idProduct}=="2b17"
5. 安装udev文件:
代码: 全选
sudo make install-udev
代码: 全选
sudo udevstart
When you power cycle the printer you should hear it whirring as it powers, then whirring again as the new firmware is uploaded.
To check the firmware is in look at /var/log/messages - -there should be some note of successful upload of firmware.
7. 重启 cupsys
代码: 全选
sudo /etc/init.d/cupsys restart
代码: 全选
sudo lpoptions -o cpi-12 -o lpi=7 -o page-left=36 -o page-right=36 -o page-top=36 -o page-bottom=36
-
- 帖子: 76
- 注册时间: 2005-08-24 17:34
tar zxvf foo2zjs-patched.tar.gz
cd foo2zjs
make //说找不到make文件
sudo make install //也一样了,错误的。
下载地址,没错呀
http://support.ideainformatica.com/hplj ... hed.tar.gz
cd foo2zjs
make //说找不到make文件
sudo make install //也一样了,错误的。
下载地址,没错呀
http://support.ideainformatica.com/hplj ... hed.tar.gz
-
- 帖子: 27
- 注册时间: 2005-06-16 5:29
再试试这个方法:
Click the link, or cut and paste the whole command line below to download the driver.
Now unpack it:
Unpack:
Now compile and install it. The INSTALL file contains more detailed instructions; please read it now.
Compile:
(Optional) Get extra files from the web, such as .ICM profiles for color
correction, and firmware:
Install driver, foomatic XML files, and extra files:
(Optional) Configure hotplug (USB; HP LJ 1000/1005/1020)
Now create printer entries for your spooler. Create at least one queue for monochrome, and another queue for color printing. Create the queues first, then edit them and set the device options as desired. See your operating system documentation for further details on creating a printer queue. Click any hyperlinks below for sample screenshots.
For Ubunto 5.10 users:
Click the link, or cut and paste the whole command line below to download the driver.
代码: 全选
$ wget http://foo2zjs.rkkda.com/foo2zjs.tar.gz
Unpack:
代码: 全选
$ tar zxf foo2zjs.tar.gz
$ cd foo2zjs
Compile:
代码: 全选
$ make
correction, and firmware:
代码: 全选
$ ./getweb 2300 # Get Minolta 2300 DL .ICM files
$ ./getweb 2200 # Get Minolta 2200 DL .ICM files
$ ./getweb cpwl # Get Minolta Color PageWorks/Pro L .ICM files
$ ./getweb all # Get all of the above
代码: 全选
$ sudo make install
代码: 全选
# make install-hotplug
For Ubunto 5.10 users:
代码: 全选
$ sudo gnome-cups-manager