升级后，屏幕中间出现5厘米宽的黑色横条（问题解决，谢谢）

[yinliang108]

整个屏幕中间出现5厘米宽的黑色横条，不知道为什么。

[bones7456]

？？这个奇怪了~

[feiy]

是不是分辨率没有配置对啊，记得之前在Suse有过这样的问题，分辨率该对了就不出现了。

[skyx]

配制？

[yinliang108]

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
Identifier "Intel Corporation 82810E DC-133 CGC [Chipset Graphics Controller]"
Driver "i810"
BusID "PCI:0:1:0"
EndSection

Section "Monitor"
Identifier "通用显示器"
Option "DPMS"
HorizSync 28-51
VertRefresh 43-60
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation 82810E DC-133 CGC [Chipset Graphics Controller]"
Monitor "通用显示器"
DefaultDepth 24
SubSection "Display"
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection

[skyx]

Section "Device"
Identifier "Intel Corporation 82810E DC-133 CGC [Chipset Graphics Controller]"

Device "Intel Corporation 82810E DC-133 CGC [Chipset Graphics Controller]"

810整合芯片组？差不多用六年了？　要是82810的芯片组，xp用起来都会吃力的。

[yinliang108]

xp下一切正常，而且早几天升级后还正常，就是昨天升级后就不行了。

[skyx]

xp下一切正常，而且早几天升级后还正常，就是昨天升级后就不行了。

如果是内核的问题，可以开机用老内核启动解决。

[yinliang108]

我用老内核也是这个问题，一样的。

[skyx]

难道和xorg 有关？

　老电脑选择一个合适的状态可能最好，至少要到这个状态做个备份

开发人员用的电脑都比较新，他们对老电脑不太感兴趣的，所以有可能老电脑越升级越没前途。

最新的机器，如果你用的和开发人员的相近似，那是越升级越激动。

[youchina]

老兄，我的问题和你一样，你解决没有？
我打算重装

[momova]

代码： 全选

HorizSync 28-51 
VertRefresh 43-60 

[momova]

这个地方有问题。看看你显示器的文明书。把这个地方改改看看行不行。

[yinliang108]

我的官方的是30-60 56-75，我已经改过来了，但是问题还是一样的！！！我现在都只好在windows下呆着了，不知道要改成多少了。

[momova]

降低版本试试。
56-75，我的是LG的775ft，这里是5X -160.