这个
http://mb.zol.com.cn/61/617944.html
ubuntu6.10 i386 光盘启动正常
贴下dmesg
ubuntu@ubuntu:~$ dmesg
[17179569.184000] Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000003bef0000 (usable)
[17179569.184000] BIOS-e820: 000000003bef0000 - 000000003bef3000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000003bef3000 - 000000003bf00000 (ACPI data)
[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 62MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f39f0
[17179569.184000] On node 0 totalpages: 245488
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 225280 pages, LIFO batch:31
[17179569.184000] HighMem zone: 16112 pages, LIFO batch:3
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 P4M80P ) @ 0x000f7900
[17179569.184000] ACPI: RSDT (v001 P4M80P AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3bef3040
[17179569.184000] ACPI: FADT (v001 P4M80P AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3bef30c0
[17179569.184000] ACPI: MADT (v001 P4M80P AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3bef7f40
[17179569.184000] ACPI: DSDT (v001 P4M80P AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x408
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:10 APIC version 20
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 40000000 (gap: 3bf00000:c2d00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet splash -- locale=zh_CN
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 1496.480 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.208000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179569.208000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179569.260000] Memory: 963556k/981952k available (1910k kernel code, 17824k reserved, 1070k data, 308k init, 64448k highmem)
[17179569.260000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.340000] Calibrating delay using timer specific routine.. 2996.68 BogoMIPS (lpj=5993366)
[17179569.340000] Security Framework v1.0.0 initialized
[17179569.340000] SELinux: Disabled at boot.
[17179569.340000] Mount-cache hash table entries: 512
[17179569.340000] CPU: After generic identify, caps: a7c9bbff 00100000 00000000 00000000 00000001 00000000 00000000
[17179569.340000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179569.340000] CPU: L2 Cache: 128K (64 bytes/line)
[17179569.340000] CPU: After all inits, caps: 27c9bbff 00100000 00000000 00000000 00000001 00003fcc 00000000
[17179569.340000] Checking 'hlt' instruction... OK.
[17179569.356000] SMP alternatives: switching to UP code
[17179569.356000] Freeing SMP alternatives: 16k freed
[17179569.356000] checking if image is initramfs... it is
[17179570.524000] Freeing initrd memory: 5564k freed
[17179570.524000] ACPI: Core revision 20060707
[17179570.528000] ACPI: Looking for DSDT ... not found!
[17179570.536000] CPU0: Centaur VIA Esther processor 1500MHz stepping 09
[17179570.536000] Total of 1 processors activated (2996.68 BogoMIPS).
[17179570.536000] ENABLING IO-APIC IRQs
[17179570.536000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179570.680000] Brought up 1 CPUs
[17179570.680000] migration_cost=0
[17179570.680000] NET: Registered protocol family 16
[17179570.680000] EISA bus registered
[17179570.680000] ACPI: bus type pci registered
[17179570.684000] PCI: PCI BIOS revision 2.10 entry at 0xf9f30, last bus=1
[17179570.684000] PCI: Using configuration type 1
[17179570.684000] Setting up standard PCI resources
[17179570.700000] ACPI: Interpreter enabled
[17179570.700000] ACPI: Using IOAPIC for interrupt routing
[17179570.700000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.700000] PCI: Probing PCI hardware (bus 00)
[17179570.708000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
[17179570.708000] PCI: Quirk-MSI-K8T Soundcard On
[17179570.708000] PCI: Unexpected Value in PCI-Register: no Change!
[17179570.708000] Boot video device is 0000:01:00.0
[17179570.708000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.820000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[17179570.820000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[17179570.820000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
[17179570.820000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179570.820000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179570.820000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179570.824000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179570.824000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179570.824000] ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
[17179570.824000] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
[17179570.824000] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
[17179570.824000] ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
[17179570.832000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.832000] pnp: PnP ACPI init
[17179570.840000] pnp: PnP ACPI: found 13 devices
[17179570.840000] PnPBIOS: Disabled by ACPI PNP
[17179570.840000] PCI: Using ACPI for IRQ routing
[17179570.840000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179570.856000] pnp: 00:02: ioport range 0x400-0x47f could not be reserved
[17179570.856000] pnp: 00:02: ioport range 0x500-0x50f has been reserved
[17179570.856000] PCI: Bridge: 0000:00:01.0
[17179570.856000] IO window: d000-dfff
[17179570.856000] MEM window: fb000000-fcffffff
[17179570.856000] PREFETCH window: f4000000-f7ffffff
[17179570.856000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179570.856000] NET: Registered protocol family 2
[17179570.896000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179570.896000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[17179570.896000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[17179570.900000] TCP: Hash tables configured (established 131072 bind 65536)
[17179570.900000] TCP reno registered
[17179570.900000] audit: initializing netlink socket (disabled)
[17179570.900000] audit(1189259374.900:1): initialized
[17179570.900000] highmem bounce pool size: 64 pages
[17179570.900000] VFS: Disk quotas dquot_6.5.1
[17179570.900000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.900000] Initializing Cryptographic API
[17179570.900000] io scheduler noop registered
[17179570.900000] io scheduler anticipatory registered
[17179570.900000] io scheduler deadline registered
[17179570.900000] io scheduler cfq registered (default)
[17179570.900000] PCI: Bypassing VIA 8237 APIC De-Assert Message
[17179570.900000] isapnp: Scanning for PnP cards...
[17179571.256000] isapnp: No Plug & Play device found
[17179571.316000] Real Time Clock Driver v1.12ac
[17179571.316000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179571.316000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.320000] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.320000] mice: PS/2 mouse device common for all mice
[17179571.320000] RAMDISK driver initialized: 16 RAM disks of 1048576K size 1024 blocksize
[17179571.320000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.320000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.320000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179571.320000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.320000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.320000] EISA: Probing bus 0 at eisa.0
[17179571.320000] EISA: Detected 0 cards.
[17179571.324000] TCP bic registered
[17179571.324000] NET: Registered protocol family 1
[17179571.324000] NET: Registered protocol family 8
[17179571.324000] NET: Registered protocol family 20
[17179571.324000] Using IPI No-Shortcut mode
[17179571.324000] ACPI: (supports S0 S3 S4 S5)
[17179571.324000] Freeing unused kernel memory: 308k freed
[17179571.348000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179572.572000] Capability LSM initialized
[17179572.656000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[17179572.656000] ACPI: Processor [CPU0] (supports 2 throttling states)
[17179572.660000] ACPI: Thermal Zone [THRM] (53 C)
[17179573.784000] SCSI subsystem initialized
[17179573.788000] libata version 1.20 loaded.
[17179573.788000] sata_via 0000:00:0f.0: version 1.1
[17179573.792000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[17179573.792000] ACPI: PCI Interrupt 0000:00:0f.0 -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169
[17179573.792000] PCI: Via IRQ fixup for 0000:00:0f.0, from 11 to 9
[17179573.792000] sata_via 0000:00:0f.0: routed to hard irq line 9
[17179573.792000] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[17179573.792000] ata1: SATA max UDMA/133 cmd 0xFF00 ctl 0xFE02 bmdma 0xFB00 irq 169
[17179573.792000] ata2: SATA max UDMA/133 cmd 0xFD00 ctl 0xFC02 bmdma 0xFB08 irq 169
[17179573.956000] scsi0 : sata_via
[17179574.120000] scsi1 : sata_via
[17179574.152000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[17179574.152000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169
[17179574.152000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 9
[17179574.152000] VP_IDE: chipset revision 6
[17179574.152000] VP_IDE: not 100% native mode: will probe irqs later
[17179574.152000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[17179574.152000] ide0: BM-DMA at 0xfa00-0xfa07, BIOS settings: hda:pio, hdb:DMA
[17179574.152000] ide1: BM-DMA at 0xfa08-0xfa0f, BIOS settings: hdc:pio, hdd:pio
[17179574.152000] Probing IDE interface ide0...
[17179575.296000] hdb: DVDR PX-751A, ATAPI CD/DVD-ROM drive
[17179575.352000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179575.356000] Probing IDE interface ide1...
[17179575.948000] hdb: ATAPI 126X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66)
[17179575.948000] Uniform CD-ROM driver Revision: 3.20
[17179576.056000] Probing IDE interface ide1...
[17179576.164000] usbcore: registered new driver usbfs
[17179576.164000] usbcore: registered new driver hub
[17179576.168000] USB Universal Host Controller Interface driver v3.0
[17179576.168000] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[17179576.168000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[17179576.168000] PCI: Via IRQ fixup for 0000:00:10.0, from 10 to 1
[17179576.168000] PCI: Setting latency timer of device 0000:00:10.0 to 64
[17179576.168000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[17179576.168000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[17179576.168000] uhci_hcd 0000:00:10.0: irq 177, io base 0x0000f900
[17179576.168000] usb usb1: configuration #1 chosen from 1 choice
[17179576.168000] hub 1-0:1.0: USB hub found
[17179576.168000] hub 1-0:1.0: 2 ports detected
[17179576.272000] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[17179576.272000] PCI: Via IRQ fixup for 0000:00:10.1, from 10 to 1
[17179576.272000] PCI: Setting latency timer of device 0000:00:10.1 to 64
[17179576.272000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[17179576.272000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[17179576.272000] uhci_hcd 0000:00:10.1: irq 177, io base 0x0000f800
[17179576.272000] usb usb2: configuration #1 chosen from 1 choice
[17179576.272000] hub 2-0:1.0: USB hub found
[17179576.272000] hub 2-0:1.0: 2 ports detected
[17179576.376000] ACPI: PCI Interrupt 0000:00:10.2 -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[17179576.376000] PCI: Via IRQ fixup for 0000:00:10.2, from 11 to 1
[17179576.376000] PCI: Setting latency timer of device 0000:00:10.2 to 64
[17179576.376000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[17179576.376000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[17179576.376000] uhci_hcd 0000:00:10.2: irq 177, io base 0x0000f700
[17179576.376000] usb usb3: configuration #1 chosen from 1 choice
[17179576.376000] hub 3-0:1.0: USB hub found
[17179576.376000] hub 3-0:1.0: 2 ports detected
[17179576.480000] ACPI: PCI Interrupt 0000:00:10.3 -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[17179576.480000] PCI: Via IRQ fixup for 0000:00:10.3, from 11 to 1
[17179576.480000] PCI: Setting latency timer of device 0000:00:10.3 to 64
[17179576.480000] uhci_hcd 0000:00:10.3: UHCI Host Controller
[17179576.480000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[17179576.480000] uhci_hcd 0000:00:10.3: irq 177, io base 0x0000f600
[17179576.480000] usb usb4: configuration #1 chosen from 1 choice
[17179576.480000] hub 4-0:1.0: USB hub found
[17179576.480000] hub 4-0:1.0: 2 ports detected
[17179576.584000] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[17179576.584000] PCI: Via IRQ fixup for 0000:00:10.4, from 5 to 1
[17179576.584000] PCI: Setting latency timer of device 0000:00:10.4 to 64
[17179576.584000] ehci_hcd 0000:00:10.4: EHCI Host Controller
[17179576.584000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[17179576.584000] ehci_hcd 0000:00:10.4: irq 177, io mem 0xfdfff000
[17179576.584000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179576.584000] usb usb5: configuration #1 chosen from 1 choice
[17179576.584000] hub 5-0:1.0: USB hub found
[17179576.584000] hub 5-0:1.0: 8 ports detected
[17179577.560000] ISO 9660 Extensions: Microsoft Joliet Level 3
[17179577.700000] ISO 9660 Extensions: RRIP_1991A
[17179577.772000] Registering unionfs 1.1.4
[17179577.796000] loop: loaded (max 8 devices)
[17179577.920000] squashfs: version 3.0 (2006/03/15) Phillip Lougher
[17179620.768000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[17179620.772000] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[17179620.772000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 185
[17179620.772000] PCI: Via IRQ fixup for 0000:00:12.0, from 10 to 9
[17179620.772000] PCI: Setting latency timer of device 0000:00:12.0 to 64
[17179620.776000] eth0: VIA Rhine II at 0x1ee00, 00:1b:b9:8a:31:db, IRQ 185.
[17179620.776000] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
[17179638.220000] FDC 0 is a post-1991 82077
[17179638.756000] input: PC Speaker as /class/input/input1
[17179638.908000] parport: PnPBIOS parport detected.
[17179638.908000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[17179639.032000] Linux agpgart interface v0.101 (c) Dave Jones
[17179639.156000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[17179639.280000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179639.344000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179640.336000] agpgart: Detected VIA P4M800CE chipset
[17179640.344000] agpgart: AGP aperture is 128M @ 0xe8000000
[17179640.652000] ts: Compaq touchscreen protocol output
[17179640.700000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[17179640.700000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 193
[17179640.700000] PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 1
[17179640.700000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[17179641.600000] eth0: link down
[17179642.692000] NET: Registered protocol family 17
[17179655.024000] ACPI: Power Button (FF) [PWRF]
[17179655.024000] ACPI: Power Button (CM) [PWRB]
[17179655.024000] ACPI: Sleep Button (CM) [SLPB]
[17179655.364000] ibm_acpi: ec object not found
[17179655.468000] pcc_acpi: loading...
[17179661.528000] lp0: using parport0 (interrupt-driven).
[17179662.328000] ppdev: user-space parallel port driver
[17179674.440000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179674.440000] apm: overridden by ACPI.
[17179694.292000] NET: Registered protocol family 10
[17179694.292000] lo: Disabled Privacy Extensions
[17179694.292000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[17179694.292000] IPv6 over IPv4 tunneling driver
[17179694.576000] Bluetooth: Core ver 2.8
[17179694.576000] NET: Registered protocol family 31
[17179694.576000] Bluetooth: HCI device and connection manager initialized
[17179694.576000] Bluetooth: HCI socket layer initialized
[17179694.860000] Bluetooth: L2CAP ver 2.8
[17179694.860000] Bluetooth: L2CAP socket layer initialized
[17179695.288000] Bluetooth: RFCOMM socket layer initialized
[17179695.288000] Bluetooth: RFCOMM TTY layer initialized
[17179695.288000] Bluetooth: RFCOMM ver 1.7
u
[原创][新闻] haha ubuntu on VIA 2500 (+) chipboard :)
-
hamaburg
- 帖子： 284
- 注册时间： 2006-06-30 12:52
-
dogal
- 帖子： 900
- 注册时间： 2006-11-23 13:04
