求助,ubuntu上网问题

OOo,TeX,KO,ABI,GIMP,Picasa,ProE,QCAD,Inkscape,Kicad,Eagle
之殇
帖子: 18
注册时间: 2005-06-12 11:46

求助,ubuntu上网问题

#1

帖子 之殇 » 2005-06-14 13:24

今天刚装好ubuntu,感觉非常不错。硬件支持很好,风格也是我喜欢的那种 :shock:
但还是出现了问题,求助各位兄弟们。
我们学校windows下是用锐捷认证的,linux下用xrgsu。可是今天装好了ubuntu,安装了xrgsu和libpcap,输入用户和密码之后会出现如下的错误:
warnin:Iint NIC eth0 does not exit (3)
Get parameter error!

可是在网络连接设置里面显示eth0已经激活了,但是没有地址。原来是安装了几个版本的linux都没有这样的情况。现在这是什么出了问题?
另外,我在安装时是选的手动配置网络。 上面的错误是什么意思?要怎么解决呢?
yongyi
帖子: 3025
注册时间: 2005-05-07 23:57
联系:

#2

帖子 yongyi » 2005-06-14 14:03

这个比较难搞,我还没机会用这个东东。

http://linuxfans.org/nuke/modules.php?n ... o&did=3539

这对你也许有帮助。
独自看一看大海
总想起身边走在路上的朋友
Lenovo E290-420[Celeron-M420/256M/60G/Intel GMA950]
笑行者
帖子: 26
注册时间: 2005-06-13 11:55
来自: 路上
联系:

#3

帖子 笑行者 » 2005-06-14 14:05

eth0 选 DHCP 试试
图片
之殇
帖子: 18
注册时间: 2005-06-12 11:46

#4

帖子 之殇 » 2005-06-14 17:55

试了,还是一样。奇怪的是显示eth0已经激活,可是上面却没有网卡的地址。不知道是哪的问题
头像
oneleaf
论坛管理员
帖子: 10441
注册时间: 2005-03-27 0:06
系统: Ubuntu 12.04

#5

帖子 oneleaf » 2005-06-14 18:22

没有抓到dhcp服务器分配的IP,建议自己设置一个IP。
当净其意如虚空,远离妄想及诸取,令心所向皆无碍
之殇
帖子: 18
注册时间: 2005-06-12 11:46

#6

帖子 之殇 » 2005-06-14 23:36

我试着用自己设置的ip,然后运行xrgsu输入用户名和密码后会出现如下错误:
Use default auth parameter, 0-use 1-unuse(default:0):
(继续运行会出现:)
IintNIC:Init socket error(1)
searching server...
connecting server...
socket:operation not permitted
If systerm work in DHCP mode, Please resume IP address!
xrgsu exit!

我不懂的是,设置网络时它没有显示网卡的物理地址,也没有默认网关设备。手动填写后,点击确定。可是再次启动网络配置,它的网卡物理地址和网关设备还是没有显示。
这有可能是哪方面的问题呢?把你认为可能的情况都说一下吧,不胜感激。谢谢谢谢! :shock:
头像
oneleaf
论坛管理员
帖子: 10441
注册时间: 2005-03-27 0:06
系统: Ubuntu 12.04

#7

帖子 oneleaf » 2005-06-14 23:43

设置的IP不在同一个网段。连接不了服务器。

检查windows下的IP,在回来设置为一样试试。
当净其意如虚空,远离妄想及诸取,令心所向皆无碍
之殇
帖子: 18
注册时间: 2005-06-12 11:46

#8

帖子 之殇 » 2005-06-14 23:58

谢谢oneleaf兄 :D ,我用的就是切到ubuntu之前windows下的ip,而且我们学校如果认证成功可以保持2个小时,现在我重新回到windows认证得到的IP还是之前和设置 ubuntu时完全一样的。应该不是这个的问题吧,主要是网卡的问题很奇怪。为什么会没有物理地址呢,我是用windows下的网卡地址填写的,可是一直有上面的问题
头像
firehare
帖子: 2625
注册时间: 2005-04-10 16:54
来自: 温州大学
联系:

Re: 求助,ubuntu上网问题

#9

帖子 firehare » 2005-06-15 2:50

之殇 写了:今天刚装好ubuntu,感觉非常不错。硬件支持很好,风格也是我喜欢的那种 :shock:
但还是出现了问题,求助各位兄弟们。
我们学校windows下是用锐捷认证的,linux下用xrgsu。可是今天装好了ubuntu,安装了xrgsu和libpcap,输入用户和密码之后会出现如下的错误:
warnin:Iint NIC eth0 does not exit (3)
Get parameter error!

可是在网络连接设置里面显示eth0已经激活了,但是没有地址。原来是安装了几个版本的linux都没有这样的情况。现在这是什么出了问题?
另外,我在安装时是选的手动配置网络。 上面的错误是什么意思?要怎么解决呢?
你用的是IEEE 802.1X论证吗?在安装xrgsu之前,网卡是否正常??
我心无畏,源自于我心无知。
图片
之殇
帖子: 18
注册时间: 2005-06-12 11:46

#10

帖子 之殇 » 2005-06-15 9:57

我们用的是802.1认证,网卡安装xrgsu之前没有检查,但我想应该是有问题的。可能是设置的问题,如果是这样,那怎样解决呢?非常感激,谢谢 :D
之殇
帖子: 18
注册时间: 2005-06-12 11:46

#11

帖子 之殇 » 2005-06-15 10:23

还有就是启动进行configuring network interface一步的时候要好久,最后失败
linux for human beings
头像
firehare
帖子: 2625
注册时间: 2005-04-10 16:54
来自: 温州大学
联系:

#12

帖子 firehare » 2005-06-15 10:52

能把你的/etc/network/interfaces文件贴出来看看吗?
我心无畏,源自于我心无知。
图片
之殇
帖子: 18
注册时间: 2005-06-12 11:46

#13

帖子 之殇 » 2005-06-15 11:32

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# This is a list of hotpluggable network interfaces.
# They will be activated automatically by the hotplug subsystem.
mapping hotplug
script grep
map eth0

# The primary network interface
iface eth0 inet dhcp
network 219.229.123.128
broadcast 219.229.123.255
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 219.229.123.129

auto eth0
linux for human beings
之殇
帖子: 18
注册时间: 2005-06-12 11:46

#14

帖子 之殇 » 2005-06-15 11:39

打开网络设置时是这样的。没有地址,也没有默认设备[/img]
附件
Screenshot 拷贝.jpg
Screenshot 拷贝.jpg (44.73 KiB) 查看 1224 次
linux for human beings
头像
firehare
帖子: 2625
注册时间: 2005-04-10 16:54
来自: 温州大学
联系:

#15

帖子 firehare » 2005-06-15 12:59

之殇 写了:# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# This is a list of hotpluggable network interfaces.
# They will be activated automatically by the hotplug subsystem.
mapping hotplug
script grep
map eth0

# The primary network interface
iface eth0 inet dhcp
network 219.229.123.128
broadcast 219.229.123.255
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 219.229.123.129

auto eth0
其中的# The primary network interface
iface eth0 inet dhcp
------------以下内容不要-------------
network 219.229.123.128
broadcast 219.229.123.255
------------以上内容不要-------------

再试试!
我心无畏,源自于我心无知。
图片
回复