会话登录界面刷新率太低怎么办?[已解决]
版面规则
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
-
- 帖子: 51
- 注册时间: 2006-10-30 9:29
会话登录界面刷新率太低怎么办?[已解决]
我装的7.10,进入桌面后刷新率很低,我在终端运行了
gtf 1024 768 80
然后出来结果:
# 1024x768 @ 80.00 Hz (GTF) hsync: 64.32 kHz; pclk: 88.50 MHz
Modeline "1024x768_80.00" 88.50 1024 1088 1200 1376 768 769 772 804 -HSync +Vsync
我把 Modeline "1024x768_80.00" 88.50 1024 1088 1200 1376 768 769 772 804 -HSync +Vsync 加入到/etc/X11/xorg.conf中的一节,重启X后,可以调到85HZ了,但是还有一个问题,不知怎么解决,而这个问题在7.04却没有:
就是在会话登录界面,即输入用户名和密码的那块,屏幕非常闪烁!
怎么解决?
gtf 1024 768 80
然后出来结果:
# 1024x768 @ 80.00 Hz (GTF) hsync: 64.32 kHz; pclk: 88.50 MHz
Modeline "1024x768_80.00" 88.50 1024 1088 1200 1376 768 769 772 804 -HSync +Vsync
我把 Modeline "1024x768_80.00" 88.50 1024 1088 1200 1376 768 769 772 804 -HSync +Vsync 加入到/etc/X11/xorg.conf中的一节,重启X后,可以调到85HZ了,但是还有一个问题,不知怎么解决,而这个问题在7.04却没有:
就是在会话登录界面,即输入用户名和密码的那块,屏幕非常闪烁!
怎么解决?
上次由 sambodhi 在 2007-11-08 10:27,总共编辑 1 次。
-
- 帖子: 299
- 注册时间: 2006-12-15 16:11
- 来自: KM
-
- 帖子: 198
- 注册时间: 2005-08-06 10:10
-
- 帖子: 17
- 注册时间: 2007-08-07 13:54
- yjsword
- 帖子: 524
- 注册时间: 2007-03-14 20:33
- 来自: 南京
- 联系:
-
- 帖子: 299
- 注册时间: 2006-12-15 16:11
- 来自: KM
- lovewine
- 帖子: 1233
- 注册时间: 2006-03-25 10:36
- 联系:
-
- 帖子: 51
- 注册时间: 2006-10-30 9:29
-
- 帖子: 51
- 注册时间: 2006-10-30 9:29
我的xorg.conf的文件如下,不知道要删除那些过高的分辨率?
请帮忙看一看:
请帮忙看一看:
代码: 全选
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies Inc RV370 [Sapphire X550 Silent]"
Driver "ati"
BusID "PCI:4:0:0"
EndSection
Section "Monitor"
Identifier "通用显示器"
Option "DPMS"
Modeline "1024x768_80.00" 88.50 1024 1088 1200 1376 768 769 772 804 -HSync +Vsync
HorizSync 30-80
VertRefresh 50-120
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc RV370 [Sapphire X550 Silent]"
Monitor "通用显示器"
DefaultDepth 24
SubSection "Display"
Modes "1024x768"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
EndSection
-
- 帖子: 19
- 注册时间: 2006-11-06 0:26