Nvidia Geforce 4 420GO 不能启用compiz效果

[chenzhouc]

我电脑的基本配置：

Pentium 4-M 2.4G
768M Mem

Nvidia geforce4 420GO显卡，成功安装受限驱动，Nvidia的LOGO也出现了，可是

之前7.04和6.10都可以开启berly的特效，到了7.10外观选项-视觉效果里默认选NONE，NORMAL选中之后提示桌面效果不可用...

难道真是太老了...请高手指点

附上我的xorg.conf


chenzhouc@SISU:~$ cat /etc/X11/xorg.conf

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
Identifier "nVidia Corporation NV17 [GeForce4 420 Go]"
Driver "nvidia"
Busid "PCI:1:0:0"
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "False"
EndSection

Section "Monitor"
Identifier "通用显示器"
Option "DPMS"
Horizsync 28-51
Vertrefresh 43-60
EndSection

Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation NV17 [GeForce4 420 Go]"
Monitor "通用显示器"
Defaultdepth 16
Option "UseDisplayDevice" "DFP"
SubSection "Display"
Modes "1024x768"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
screen "Default Screen"
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"

# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
Inputdevice "Synaptics Touchpad"
EndSection
Section "Module"
Load "glx"
EndSection

[chenzhouc]

没有人顶。。。

[percy11]

关注，我也是这个显卡。。

[aynes]

一样，我也是这个显卡，BENQ JOY3000C06 的本子，我是安装后直接黑屏，只能换成开源驱动，“NV”
如果一改用“NVIDIA”就黑，晕的不行了。

[luojie-dune]

再升级试试

~~~~~