单位发了个HP 2510P, 但是无法安装 Ubuntu 7.10.
光盘引导后出现安装界面, 选择安装后机器就一直钉着不动了, 请问哪个遇到个这种问题?
难道不支持2510p?
HP 2510P 无法安装 Ubuntu 7.10
-
- 帖子: 4
- 注册时间: 2007-12-26 23:26
- 内存不足
- 论坛版主
- 帖子: 3277
- 注册时间: 2005-08-18 18:43
- 联系:
- cash cow
- 帖子: 34
- 注册时间: 2007-05-18 10:05
- carbont
- 帖子: 3406
- 注册时间: 2007-11-22 10:20
- 来自: 北京
-
- 帖子: 4
- 注册时间: 2007-12-26 23:26
-
- 帖子: 4
- 注册时间: 2007-12-26 23:26
I just installed 7.10 on a HP 2510p today.
Before the installation I pressed F6 and added noacpi nolacpi pci=noacpi
generic.all_generic_ide=1 to the boot command.
However it seems that all that was needed was the generic.all_generic_ide=1 option,
atleast that is all I use now that I boot from the HD
If modprobing ata_piix or ide-generic didn't work for me. ata_piix didn't affect the
harddrive and ide-generic did work, but there where some irq problems that made it
impossible to install (took 1 hour to mkfs.ext3 a 200MB partition).
So my bet would be:
1) Get the 7.10 tribe 4 install disk.
2) Press F6 at the boot menu and add generic.all_generic_ide=1
3) Reboot and use the generic option again, then add it to you permanent boot options in
/boot/grub/menu.lst
这是在Ubuntu官网论坛中看到的, 但还是不行~~~~
Before the installation I pressed F6 and added noacpi nolacpi pci=noacpi
generic.all_generic_ide=1 to the boot command.
However it seems that all that was needed was the generic.all_generic_ide=1 option,
atleast that is all I use now that I boot from the HD
If modprobing ata_piix or ide-generic didn't work for me. ata_piix didn't affect the
harddrive and ide-generic did work, but there where some irq problems that made it
impossible to install (took 1 hour to mkfs.ext3 a 200MB partition).
So my bet would be:
1) Get the 7.10 tribe 4 install disk.
2) Press F6 at the boot menu and add generic.all_generic_ide=1
3) Reboot and use the generic option again, then add it to you permanent boot options in
/boot/grub/menu.lst
这是在Ubuntu官网论坛中看到的, 但还是不行~~~~