触摸板设置问题!!!
版面规则
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
-
- 帖子: 65
- 注册时间: 2007-12-31 17:29
- 来自: 北京
- 联系:
- eexpress
- 帖子: 58428
- 注册时间: 2005-08-14 21:55
- 来自: 长沙
xorg.conf里面加这句。
代码: 全选
☎ grep -C 4 SHMConfig /etc/X11/xorg.conf
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "100"
# 开水平滚动
Option "SHMConfig" "on"
Option "TapButton1" "1"
Option "TapButton3" "3"
# 交换左右键,左手鼠标时候,单击才正常。
Option "TapButton2" "2"
● 鸣学
-
- 帖子: 65
- 注册时间: 2007-12-31 17:29
- 来自: 北京
- 联系:
eexpress 写了:xorg.conf里面加这句。代码: 全选
☎ grep -C 4 SHMConfig /etc/X11/xorg.conf Option "Device" "/dev/psaux" Option "Protocol" "auto-dev" Option "HorizScrollDelta" "100" # 开水平滚动 Option "SHMConfig" "on" Option "TapButton1" "1" Option "TapButton3" "3" # 交换左右键,左手鼠标时候,单击才正常。 Option "TapButton2" "2"
我加了这句,可是还是那样啊。。。不是需要重启吧?
-
- 帖子: 65
- 注册时间: 2007-12-31 17:29
- 来自: 北京
- 联系:
eexpress 写了:xorg.conf里面加这句。代码: 全选
☎ grep -C 4 SHMConfig /etc/X11/xorg.conf Option "Device" "/dev/psaux" Option "Protocol" "auto-dev" Option "HorizScrollDelta" "100" # 开水平滚动 Option "SHMConfig" "on" Option "TapButton1" "1" Option "TapButton3" "3" # 交换左右键,左手鼠标时候,单击才正常。 Option "TapButton2" "2"
晕了,我把这个加进去了。。。然后重启。。。就进不了桌面了。。。。
还是 用 sudo nano /etc/X11/xorg.conf 编辑,把那段删除后才能进登录界面。。。。
-
- 帖子: 65
- 注册时间: 2007-12-31 17:29
- 来自: 北京
- 联系:
哦 不好意思 这样啊 我是因为里面没那一段所以才加进去的eexpress 写了:你不会是加了这段吧。只要加一句啊。我这段是表示加在哪个位置。
你看我的 xorg.conf
代码: 全选
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Device"
Identifier "nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300]"
Driver "nvidia"
Busid "PCI:1:0:0"
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "True"
EndSection
Section "Monitor"
Identifier "通用显示器"
Option "DPMS"
Horizsync 28-64
Vertrefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300]"
Monitor "通用显示器"
Defaultdepth 24
SubSection "Display"
Modes "1280x800"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen "Default Screen"
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Module"
Load "glx"
EndSection
- eexpress
- 帖子: 58428
- 注册时间: 2005-08-14 21:55
- 来自: 长沙
完整段,是我自己加的。曾经内核取消了这段,引起麻烦。
Section "InputDevice"
# 左上角模拟1键,右上角模拟2键,右下角模拟3键。
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "100"
# 开水平滚动
Option "SHMConfig" "on"
Option "TapButton1" "1"
Option "TapButton3" "3"
# 交换左右键,左手鼠标时候,单击才正常。
Option "TapButton2" "2"
# 使用双指模拟中键,用于复制文字。
Option "LTCornerButton" "1"
# 左手鼠标时,系统把xmodmap -pp键值交换,但是同时也影响了触摸板的TapButton1/3事件。
EndSection
● 鸣学
-
- 帖子: 65
- 注册时间: 2007-12-31 17:29
- 来自: 北京
- 联系:
Re: 完整段,是我自己加的。曾经内核取消了这段,引起麻烦。
还是没太明白怎么用。。。。eexpress 写了:Section "InputDevice"
# 左上角模拟1键,右上角模拟2键,右下角模拟3键。
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "100"
# 开水平滚动
Option "SHMConfig" "on"
Option "TapButton1" "1"
Option "TapButton3" "3"
# 交换左右键,左手鼠标时候,单击才正常。
Option "TapButton2" "2"
# 使用双指模拟中键,用于复制文字。
Option "LTCornerButton" "1"
# 左手鼠标时,系统把xmodmap -pp键值交换,但是同时也影响了触摸板的TapButton1/3事件。
EndSection
把你这段加进去?
没反应啊?还是一楼那样
ps:电脑重启了
谢谢你啊。
- yaoms
- 帖子: 4952
- 注册时间: 2007-10-19 14:51
- 来自: 深圳
-
- 帖子: 65
- 注册时间: 2007-12-31 17:29
- 来自: 北京
- 联系: