[问题]MacBook的问题

[wudaown]

大家好阿..我是新手啦..在自己的台式安装了Ubuntu可是显卡安装不上..是ATI X300的显卡..经过5天我放弃了..参考了很多帖子..重装N多次...
结果在自己的MacBook安装了ubuntu 7.10很成功..调试了3天基本没问题..不过我的快捷键和TouchPad不能用..
我参考了很多帖子都不行还导致进入X..又是两天我实在是不行了才来发帖求助的..不想给各位天麻烦..现在实在是不行了..我参考了下面的帖子..我的Macbook型号是最新..我根据帖子里的方法弄了..结果导致系统崩溃,,..https://help.ubuntu.com/community/MacBook_Santa_Rosa

想清各位帮帮忙..我就像让touchpad能用就行
就是不能卷动..也不能右机..就是这个问题..快捷键我倒是无所谓..不过能弄好就更好了
先谢谢了..
在现等

[weive]

帖子里面不是写了吗？如果还不行……我也不懂。

[jimhu]

我的touchpad不能单击右键，不能向下或者向上卷动，其他都好。。。

[wudaown]

就是不能卷动..也不能右机..就是这个问题..快捷键我倒是无所谓..不过能弄好就更好了

[wudaown]

自己顶..不能沉阿..

[xiooli]

用鼠标！

[wudaown]

经常出门..带鼠标不方便..而且问题从要弄好把..顶

[jimhu]

不过我没有照着上面那个Wiki弄过，你弄过吗？
我就看了下无限网卡的部分，其他都么有参阅哈哈。

Backup and edit xorg.conf:
备份并且编辑xorg.conf:

代码： 全选

sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf.backup 
sudo gedit /etc/X11/xorg.conf

There is an "InputDevice" section with the following line:
找到“InputDevice”章节，里面有如下行：

代码： 全选

Identifier      "Synaptics Touchpad"

Replace that Section with this:
用下面的内容代替这一章节：

代码： 全选

Section "InputDevice"
        # updated 2007-12-07
        # use command "synclient -m 1" to see raw output
        # common stuff
        Identifier      "Synaptics Touchpad"
        Driver          "synaptics"
        Option          "SendCoreEvents"        "true"
        Option          "Device"                "/dev/psaux"
        Option          "Protocol"              "auto-dev"
        
        # not using edge scrolling
        Option          "HorizEdgeScroll"       "0"
        Option          "VertEdgeScroll"        "0"
        
        # use two finger scrolling
        Option          "VertTwoFingerScroll"   "1"
        Option          "HorizTwoFingerScroll"  "1" # set to 0 if you don't want horizontal scrolling
        
        # scroll speed, lower is faster
        Option          "HorizScrollDelta"      "10"
        Option          "VertScrollDelta"       "10"

        # minimum pressure motion factor
        Option          "PressureMotionMinZ"    "10"

        # touch and untouch thresholds, higher numbers if you like to push hard
        Option          "FingerLow"             "10"
        Option          "FingerHigh"            "20" # change to 30 or 40 if you like

        # borders based on output from synclient
        Option          "LeftEdge"              "20"
        Option          "RightEdge"             "1200"
        Option          "TopEdge"               "20"
        Option          "BottomEdge"            "370"

        # speeds, smaller number for a slower mouse
        Option          "MinSpeed"              "0.8" # 0.5 is very slow, 1.5 is very fast
        Option          "MaxSpeed"              "1.2" # up to 1.5 works ok
        Option          "AccelFactor"           "0.10"

        # tap times, change to suit your tapping habits
        Option          "MaxTapMove"            "100"
        Option          "MaxTapTime"            "100"
        Option          "MaxDoubleTapTime"      "200"
        
        # don't change these or two finger tap stops working
        Option          "TapButton2"            "3"
        Option          "TapButton3"            "2"

        # must be commented out or normal tapping wont work
        #Option         "TapButton1"            "0"

        # needed for disabled while typing fix  
        Option          "SHMConfig"             "on"
EndSection

This will give you a OS X like feel. You can right click by tapping two fingers. The two finger scroll also works.
这会给你OSX中的感觉。你现在可以通过两个手指点按来表示单击右键。两个手指拖动也同样奏效。

For the changes to take effect you need to log out and log in again by pressing control+alt+backspace (labeled "delete" on MacBook keyboard).
要使配置生效，你需要重新登录，这可以通过同时按control+alt+backspace来完成（就是MacBook键盘上的delete键）

差不多好像这样就好了。。。。。。

[wudaown]

谢谢LZ的朋友..
可是我就是按照上面的方法结果导致进入X的..
顶

[wudaown]

继续自己顶..不能沉

[james_xl]

ubuntu下默认三个手指同时点击就是右键的