[问题]8.04更新到了2.6.24-15进不了系统了！！！！！

[sxfbest]

不知道为什么，现在只好用回2.6.24-12的

[rabbit407]

我也是,只能用14了

[carbont]

我昨天更新的，好像没有什么问题的说。

[sxfbest]

还是不能启动哦

menu.lst内容：
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=4ebe6bd7-5f97-4d68-bef3-10185a817731 ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,8)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Ubuntu hardy (development branch), kernel 2.6.24-15-generic
root (hd0,8)
kernel /vmlinuz-2.6.24-15-generic root=UUID=4ebe6bd7-5f97-4d68-bef3-10185a817731 ro quiet splash
initrd /initrd.img-2.6.24-15-generic
quiet

title Ubuntu hardy (development branch), kernel 2.6.24-15-generic (recovery mode)
root (hd0,8)
kernel /vmlinuz-2.6.24-15-generic root=UUID=4ebe6bd7-5f97-4d68-bef3-10185a817731 ro single
initrd /initrd.img-2.6.24-15-generic

title Ubuntu hardy (development branch), kernel 2.6.24-12-generic
root (hd0,8)
kernel /vmlinuz-2.6.24-12-generic root=UUID=4ebe6bd7-5f97-4d68-bef3-10185a817731 ro quiet splash
initrd /initrd.img-2.6.24-12-generic
quiet

title Ubuntu hardy (development branch), kernel 2.6.24-12-generic (recovery mode)
root (hd0,8)
kernel /vmlinuz-2.6.24-12-generic root=UUID=4ebe6bd7-5f97-4d68-bef3-10185a817731 ro single
initrd /initrd.img-2.6.24-12-generic

title Ubuntu hardy (development branch), memtest86+
root (hd0,8)
kernel /memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Microsoft Windows XP Professional
root (hd0,0)
savedefault
makeactive
chainloader +1

[mikel_zhao]

没问题！

[笑笑]

有出现过

[seagle0128]

不知道为什么，现在只好用回2.6.24-12的

进不了系统是什么意思？如果是白屏或者黑屏的话，最好在恢复模式重新安装一下显卡驱动。

[jarod007]

不知道为什么，现在只好用回2.6.24-12的

进不了系统是什么意思？如果是白屏或者黑屏的话，最好在恢复模式重新安装一下显卡驱动。

14时候我自动恢复过,现在一直没问题

[janzx]

今天有人向我求助，说打印机无法使用。我问了一下，驱动什么的设置有没有改过？他说没有，昨天打印的还好好好的，今天就没打印出来东西，待打印的文档还在那个图表里，删也删不掉。我于是走过去看了一下，发现USB线松了，重新插上去，就又可以打印了。
他高兴的说，看样子真的多学习一下电脑知识。
于是，我很郁闷。

[carbont]

今天有人向我求助，说打印机无法使用。我问了一下，驱动什么的设置有没有改过？他说没有，昨天打印的还好好好的，今天就没打印出来东西，待打印的文档还在那个图表里，删也删不掉。我于是走过去看了一下，发现USB线松了，重新插上去，就又可以打印了。
他高兴的说，看样子真的多学习一下电脑知识。
于是，我很郁闷。

我听人说，有一次别人打电话给他，说她的电脑不能开机等等等等，前一天还能开机的。最后才知道是没有插电……

[mikel_zhao]

9楼10楼明显是得了便宜还卖乖。

那明摆是mm主动要求帮忙"修机器"么！

[hyfyz]

我也遇到这个问题,用generic的进不去,后来用386的可以进

[daf3707]

2.26.24-15我安装就不成功.