[问题]安装ATI受限驱动后，启动分辨率变成1600X1200怎么解决？

寂寞杀手 · #1

我的机器，还是HP的DC5750，显卡为X1150，安装了受限驱动后，启动的默认分辨率变成了1600X1200，可是我的是17寸的液晶，只支持1280X1024的最大分辨率，所以在登录界面的时候，会出现一个白色的提示框（是显示器的），提示我分辨率超过最大分辨率，自动调整为1280X1024，但是这个提示框正好堵在登录输入窗口上，导致我每次登录都盲打……但是登录进来以后，分辨率就自己调整为1280X1024了……这个怎么解决？我想在登录窗口也能看到是1280X1024的分辨率，而不是个白色的提示框……

ffsxsy · #2

我的也是，登录分辨率1280*1024和进入系统的分辨率1024*769不一致！求答案！

nospeeder · #3

修改/etc/X11/xorg.conf:
将Section "Screen"里面多余的的分辨率删除掉，注销再进入试下。

hongan · #4

这还算好的，上次我装了安装了受限驱动直接640*480的分辨率，打开终端都显示不全 ${L_SMILIES_CONFUSED}$

寂寞杀手 · #5

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "vmmouse"
EndSection

Section "Device"
Identifier "Configured Video Device"
Driver "fglrx"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
Defaultdepth 24
EndSection

Section "ServerLayout"
Identifier "Default Layout"
screen "Default Screen"
EndSection
Section "Module"
Load "glx"
EndSection
这是我xorg.conf的全部内容，我不知道哪里修改啊！郁闷的！

qiang_liu8183 · #6

液晶显示器把最佳分辨率以外的所有分辨率删除即可

寂寞杀手 · #7

qiang_liu8183 写了：液晶显示器把最佳分辨率以外的所有分辨率删除即可

拜托！我是问怎么删除……郁闷死了……

archsatan · #8

如题！

weive · #9

start up manager 能解决吗？

archsatan · #10

Start up manager在哪？
请指点！

qiang_liu8183 · #11

寂寞杀手写了：
qiang_liu8183 写了：液晶显示器把最佳分辨率以外的所有分辨率删除即可
拜托！我是问怎么删除……郁闷死了……

代码：全选

sudo vim /etc/X11/xorg.conf

zhongsanakang · #12

寂寞杀手写了：..........
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
Defaultdepth 24
EndSection ..........
这是我xorg.conf的全部内容，我不知道哪里修改啊！郁闷的！

把这一改成如以下的内容重启便可

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
Defaultdepth 24
SubSection "Display"
Depth 24
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection

[问题]安装ATI受限驱动后，启动分辨率变成1600X1200怎么解决？

[问题]安装ATI受限驱动后，启动分辨率变成1600X1200怎么解决？

同样的问题，请求解答