[问题]装了NV驱动以后遇到问题[新情况:低分辨率,见8楼]
- jimhu
- 帖子: 1322
- 注册时间: 2006-01-25 22:29
- 来自: 上海
- 联系:
[问题]装了NV驱动以后遇到问题[新情况:低分辨率,见8楼]
安装前一切正常,可以选择所有显示器支持的分辨率。但是一旦安装驱动(用受限驱动管理器)重启后就“超出显示范围”了,如果输入用户名和密码,可以正常听到登录声音。
以前6.04到7.10都正常的,7300GT显卡,请问如何在图形界面下修改分辨率?
以前6.04到7.10都正常的,7300GT显卡,请问如何在图形界面下修改分辨率?
上次由 jimhu 在 2008-04-20 21:00,总共编辑 1 次。
- jimhu
- 帖子: 1322
- 注册时间: 2006-01-25 22:29
- 来自: 上海
- 联系:
么人知道吗?自己顶一下。
* MACBOOK MB063CH/B
OS:Snow Leopard/XP
* AMD X2 3600+/2G RAM/160GB+500GB Seagate/7300GT
OS:Arch/Vista
Kubuntu User #18899
=================================
Full Circle中文杂志 | Ubuntu社区独立发行的电子月刊
http://www.freeearth.org.cn
OS:Snow Leopard/XP
* AMD X2 3600+/2G RAM/160GB+500GB Seagate/7300GT
OS:Arch/Vista
Kubuntu User #18899
=================================
Full Circle中文杂志 | Ubuntu社区独立发行的电子月刊
http://www.freeearth.org.cn
- syrano
- 帖子: 4313
- 注册时间: 2007-10-06 18:40
- jimhu
- 帖子: 1322
- 注册时间: 2006-01-25 22:29
- 来自: 上海
- 联系:
现在不能进入图形界面。。。
看看这个是我的文件
看看这个是我的文件
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
EndSection
* MACBOOK MB063CH/B
OS:Snow Leopard/XP
* AMD X2 3600+/2G RAM/160GB+500GB Seagate/7300GT
OS:Arch/Vista
Kubuntu User #18899
=================================
Full Circle中文杂志 | Ubuntu社区独立发行的电子月刊
http://www.freeearth.org.cn
OS:Snow Leopard/XP
* AMD X2 3600+/2G RAM/160GB+500GB Seagate/7300GT
OS:Arch/Vista
Kubuntu User #18899
=================================
Full Circle中文杂志 | Ubuntu社区独立发行的电子月刊
http://www.freeearth.org.cn
- ebok
- 帖子: 852
- 注册时间: 2008-02-15 0:09
- woainba15
- 帖子: 833
- 注册时间: 2006-11-11 17:14
- 来自: 浙江宁波
- 联系:
- jimhu
- 帖子: 1322
- 注册时间: 2006-01-25 22:29
- 来自: 上海
- 联系:
现在可以显示桌面了,不过分辨率最高就640*480.....
* MACBOOK MB063CH/B
OS:Snow Leopard/XP
* AMD X2 3600+/2G RAM/160GB+500GB Seagate/7300GT
OS:Arch/Vista
Kubuntu User #18899
=================================
Full Circle中文杂志 | Ubuntu社区独立发行的电子月刊
http://www.freeearth.org.cn
OS:Snow Leopard/XP
* AMD X2 3600+/2G RAM/160GB+500GB Seagate/7300GT
OS:Arch/Vista
Kubuntu User #18899
=================================
Full Circle中文杂志 | Ubuntu社区独立发行的电子月刊
http://www.freeearth.org.cn
-
- 帖子: 52
- 注册时间: 2007-09-06 16:42
运行完 之后的 xorg.conf如下,ctrl+Alt+Backspace,之后仍然是低分辨率,我的是800*600ebok 写了:sudo dpkg-reconfigure xserver-xorg
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Emulate3Buttons" "true"
EndSection
Section "Device"
Identifier "Configured Video Device"
Option "UseFBDev" "true"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
EndSection
-
- 帖子: 52
- 注册时间: 2007-09-06 16:42
终端显示sfbi 写了:运行nvidia-xconfig出来啥/etc/X11/xorg.conf文件啊?
Using X configuration file: "/etc/X11/xorg.conf".
VALIDATION ERROR: Data incomplete in file /etc/X11/xorg.conf.
Device section "Configured Video Device" must have a Driver
line.
Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup'
New X configuration file written to '/etc/X11/xorg.conf'
好象是说没有驱动,可是我的驱动是装了的啊,从新利得里面装的,nvidia-glx-new啊
xorg.conf如下: 重启x server之后,仍然无起色。。。。。。
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Thu Feb 14 18:20:37 PST 2008
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
- liangsuilong
- 帖子: 777
- 注册时间: 2007-08-11 20:54
- 来自: 广州
- 联系:
- jimhu
- 帖子: 1322
- 注册时间: 2006-01-25 22:29
- 来自: 上海
- 联系:
但是确实是按照7.10的方法装的恶。。。。
* MACBOOK MB063CH/B
OS:Snow Leopard/XP
* AMD X2 3600+/2G RAM/160GB+500GB Seagate/7300GT
OS:Arch/Vista
Kubuntu User #18899
=================================
Full Circle中文杂志 | Ubuntu社区独立发行的电子月刊
http://www.freeearth.org.cn
OS:Snow Leopard/XP
* AMD X2 3600+/2G RAM/160GB+500GB Seagate/7300GT
OS:Arch/Vista
Kubuntu User #18899
=================================
Full Circle中文杂志 | Ubuntu社区独立发行的电子月刊
http://www.freeearth.org.cn
-
- 帖子: 48
- 注册时间: 2007-11-10 17:31
- jimhu
- 帖子: 1322
- 注册时间: 2006-01-25 22:29
- 来自: 上海
- 联系:
尝试安装NV官网上面的RUN文件,安装完后仍然“超出显示范围”。
看了一下xorg.conf好象是因为刷新频率超出了。
晚上到家里把conf贴出来,大家再帮忙看看。
看了一下xorg.conf好象是因为刷新频率超出了。
晚上到家里把conf贴出来,大家再帮忙看看。
* MACBOOK MB063CH/B
OS:Snow Leopard/XP
* AMD X2 3600+/2G RAM/160GB+500GB Seagate/7300GT
OS:Arch/Vista
Kubuntu User #18899
=================================
Full Circle中文杂志 | Ubuntu社区独立发行的电子月刊
http://www.freeearth.org.cn
OS:Snow Leopard/XP
* AMD X2 3600+/2G RAM/160GB+500GB Seagate/7300GT
OS:Arch/Vista
Kubuntu User #18899
=================================
Full Circle中文杂志 | Ubuntu社区独立发行的电子月刊
http://www.freeearth.org.cn