哪位朋友 在盗版 vista sp1下 安装 ubuntu8.04成功了 ？
版面规则
我们都知道新人的确很菜，也喜欢抱怨，并且带有浓厚的Windows习惯，但既然在这里询问，我们就应该有责任帮助他们解决问题，而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享，以人为本，这正是Ubuntu的精神所在。
我们都知道新人的确很菜，也喜欢抱怨，并且带有浓厚的Windows习惯，但既然在这里询问，我们就应该有责任帮助他们解决问题，而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享，以人为本，这正是Ubuntu的精神所在。
-
bbdvd
- 帖子： 33
- 注册时间： 2007-04-06 16:22
哪位朋友 在盗版 vista sp1下 安装 ubuntu8.04成功了 ？
vista sp1我用的 模拟 bios的 方式 破解 ，很多人说 这样 无法 安装双 系统 ，现在 ubuntu 8.04的 win下 安装 很 吸引人 ，不知道 可不可以 双系统 呢 ？有没有 成功 安装的人来分享 一下 心得 ？谢谢
-
寂寞杀手
- 帖子： 335
- 注册时间： 2006-09-27 19:59
- 来自： 银川，宁夏
-
karron
- 帖子： 6226
- 注册时间： 2005-06-11 14:03
- 来自： 不明真相的群众
- 联系：
我安装的vista sp1 oem版本, 因为我本身是笔记本, 所以不需要额外破解. 安装kubuntu804没有任何问题. 也曾经尝试过arch和opensuse10.3都没有问题
我的blog,关于技术,软件,linux,vim <---- 所有博客均被河蟹.
-
amei000000
- 帖子： 4
- 注册时间： 2008-04-14 20:50
-
aaazjz
- 帖子： 444
- 注册时间： 2007-03-24 9:08
- 来自： 青岛
- 联系：
虽然看见 win就不爽吧，还是分享来一下看到的……
http://apcmag.com/vista_sp1_wont_instal ... rosoft.htm
Vista SP1 won't install on dual-boot systems: Microsoft
Are you currently running Windows and Linux in a dual-boot setup? You're going to have major headaches with Vista SP1, Microsoft has admitted.
If you’re dualbooting Windows Vista Enterprise or Ultimate alongside a Linux distro, and have installed the Linux bootloader into the MBR, then you’re guaranteed to run into problems when installing Vista Service Pack 1, Microsoft has admitted.
The service pack has a couple of prerequisite updates and one of them, KB935509, contains an update to the Windows Vista bootloader. However, this bootloader is often replaced by open source bootloaders like Grub when installing Linux onto a system.
Microsoft has excused itself by saying Vista SP1 contains an update to the BitLocker feature, and replacing the bootloader is a necessary prerequisite just in case the system being serviced contains a drive encrypted with BitLocker or worse, an encrypted boot partition.
However, the update performs a “chain of trust” integrity check on the system’s boot sequence, from the onboard TPM chip, through the MBR and into the operating system itself. In a dualbooting scenario where the Vista bootloader has been replaced (eg: with GRUB or LILO), the integrity check fails and the update aborts, halting the service pack installation.
Microsoft Technology Advisor Michael Kleef explained to APC that “…BitLocker isn’t just about encryption and system validation, but rather data integrity. When you enter your PIN, BitLocker checks it every step of the way from the TPM chip through the bootloader, and if it finds something that doesn’t match what it’s expecting, access is denied. Installing LILO or GRUB effectively breaks the chain of trust as these bootloaders take over the MBR, so on an encrypted boot partition, this means that the system won’t boot.
“However, it’s actually a very good thing that the update and the servicing fail in this scenario, because you can just imagine the implications if the update automatically reinstalled the Vista MBR to restore boot integrity – we’d be flooded with complaints.”
Microsoft hasn’t tested dualbooting scenarios - certainly not to the extent that they’re prepared to comment on them, at least – but there are a number of reports of successful workarounds in this situation.
If the Linux and Vista partitions are installed on the same hard drive, you have to restore the Vista MBR, either using the Vista recovery DVD or using the MBR reinstall feature contained within EasyBCD, before installing SP1.
If the operating systems are on different hard drives, simply change the drive boot order in the BIOS to point to the disk containing Vista first, thus bypassing the Linux bootloader on the primary disk.
Once SP1 has been installed, you can go back and either reinstall the non-Vista bootloader or change the hard drive boot order back to the way it was. But in either case, if Vista’s bootloader isn’t installed to the MBR, BitLocker won’t function and the MBR will need to be restored before it can be used.
The failure of KB935509 does not depend on whether BitLocker is active, but rather the host operating system’s capacity for using it. Therefore, although the bootloader is unified across all versions of Vista, only Vista Enterprise and Ultimate are affected – other versions do not feature BitLocker and so do not require KB935509 as an SP1 prerequisite. APC tested this with different versions of Vista and have verified that they are unaffected.
http://apcmag.com/vista_sp1_wont_instal ... rosoft.htm
Vista SP1 won't install on dual-boot systems: Microsoft
Are you currently running Windows and Linux in a dual-boot setup? You're going to have major headaches with Vista SP1, Microsoft has admitted.
If you’re dualbooting Windows Vista Enterprise or Ultimate alongside a Linux distro, and have installed the Linux bootloader into the MBR, then you’re guaranteed to run into problems when installing Vista Service Pack 1, Microsoft has admitted.
The service pack has a couple of prerequisite updates and one of them, KB935509, contains an update to the Windows Vista bootloader. However, this bootloader is often replaced by open source bootloaders like Grub when installing Linux onto a system.
Microsoft has excused itself by saying Vista SP1 contains an update to the BitLocker feature, and replacing the bootloader is a necessary prerequisite just in case the system being serviced contains a drive encrypted with BitLocker or worse, an encrypted boot partition.
However, the update performs a “chain of trust” integrity check on the system’s boot sequence, from the onboard TPM chip, through the MBR and into the operating system itself. In a dualbooting scenario where the Vista bootloader has been replaced (eg: with GRUB or LILO), the integrity check fails and the update aborts, halting the service pack installation.
Microsoft Technology Advisor Michael Kleef explained to APC that “…BitLocker isn’t just about encryption and system validation, but rather data integrity. When you enter your PIN, BitLocker checks it every step of the way from the TPM chip through the bootloader, and if it finds something that doesn’t match what it’s expecting, access is denied. Installing LILO or GRUB effectively breaks the chain of trust as these bootloaders take over the MBR, so on an encrypted boot partition, this means that the system won’t boot.
“However, it’s actually a very good thing that the update and the servicing fail in this scenario, because you can just imagine the implications if the update automatically reinstalled the Vista MBR to restore boot integrity – we’d be flooded with complaints.”
Microsoft hasn’t tested dualbooting scenarios - certainly not to the extent that they’re prepared to comment on them, at least – but there are a number of reports of successful workarounds in this situation.
If the Linux and Vista partitions are installed on the same hard drive, you have to restore the Vista MBR, either using the Vista recovery DVD or using the MBR reinstall feature contained within EasyBCD, before installing SP1.
If the operating systems are on different hard drives, simply change the drive boot order in the BIOS to point to the disk containing Vista first, thus bypassing the Linux bootloader on the primary disk.
Once SP1 has been installed, you can go back and either reinstall the non-Vista bootloader or change the hard drive boot order back to the way it was. But in either case, if Vista’s bootloader isn’t installed to the MBR, BitLocker won’t function and the MBR will need to be restored before it can be used.
The failure of KB935509 does not depend on whether BitLocker is active, but rather the host operating system’s capacity for using it. Therefore, although the bootloader is unified across all versions of Vista, only Vista Enterprise and Ultimate are affected – other versions do not feature BitLocker and so do not require KB935509 as an SP1 prerequisite. APC tested this with different versions of Vista and have verified that they are unaffected.
-
sevk
- 帖子： 2060
- 注册时间： 2007-05-08 16:26
- 系统： arch
- 来自： 火星内核某分子内某原子核内
- 联系：
模拟 bios其实也是grub的原理.
softmod和vistaloader都是把自己安装到mbr的,利用grub,模拟BIOS,再载入vista引导.
解决办法:安装UBUNTU时,不要把GRUB安装到MBR,而且是保留MBR内容.
然后至少有这样2个办法:
1,利用第三方引导程序加引导UBUNTU和VISTA,看这个文章: http://www.linuxidc.com/Linux/2007-12/10061p4.htm
2, 装完UB马上备份引导程序: http://hi.baidu.com/sevk/blog/item/769b ... 3fa44.html .
vistaloader是包含grub的,而且只要在根目录自己写一个Menu.lst,编辑这个menu.lst就可以自己加载需要的内容,比如放一个ntldr和boot.ini.
也就是说,可以利用这个VISTA破解程序中的grub,来引导备份的UB引导程序.
或者研究一下vista自带的bootmgr,想办法用VISTA引导这个刚备份的引导程序.
softmod和vistaloader都是把自己安装到mbr的,利用grub,模拟BIOS,再载入vista引导.
解决办法:安装UBUNTU时,不要把GRUB安装到MBR,而且是保留MBR内容.
然后至少有这样2个办法:
1,利用第三方引导程序加引导UBUNTU和VISTA,看这个文章: http://www.linuxidc.com/Linux/2007-12/10061p4.htm
2, 装完UB马上备份引导程序: http://hi.baidu.com/sevk/blog/item/769b ... 3fa44.html .
vistaloader是包含grub的,而且只要在根目录自己写一个Menu.lst,编辑这个menu.lst就可以自己加载需要的内容,比如放一个ntldr和boot.ini.
也就是说,可以利用这个VISTA破解程序中的grub,来引导备份的UB引导程序.
或者研究一下vista自带的bootmgr,想办法用VISTA引导这个刚备份的引导程序.
笔记本 :
F208S : gentoo
A460P i3G D6 : UBUNTU + WIN7
UN43D1 : UBUNTU + WIN7
1000人超级QQ群 LINUX + WIN : 31465544 或 18210387
F208S : gentoo
A460P i3G D6 : UBUNTU + WIN7
UN43D1 : UBUNTU + WIN7
1000人超级QQ群 LINUX + WIN : 31465544 或 18210387
-
zoidss
- 帖子： 8
- 注册时间： 2008-01-17 8:40
-
anandayang
- 帖子： 138
- 注册时间： 2008-01-24 16:24
-
sfree
- 帖子： 603
- 注册时间： 2007-03-17 1:24
- 来自： 湖南长沙
-
karron
- 帖子： 6226
- 注册时间： 2005-06-11 14:03
- 来自： 不明真相的群众
- 联系：
