升级后声卡失效

CPU/显卡/打印机/USB设备等硬件问题
回复
duzc2
帖子: 31
注册时间: 2008-04-28 16:32

升级后声卡失效

#1

帖子 duzc2 » 2008-04-28 16:57

我是新手,什么都不懂阿。


我昨天夜里从7.10升级到8.04,重启之后可以放音乐。
再重启就没有声卡了。。。大家帮忙阿

dmesg:

[ 0.000000] Linux version 2.6.24-16-386 (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 Thu Apr 10 12:50:06 UTC 2008 (Ubuntu 2.6.24-16.30-386)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7f0000 (usable)
[ 0.000000] BIOS-e820: 000000003f7f0000 - 000000003f7f3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f7f3000 - 000000003f800000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 119MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f4c70
[ 0.000000] Entering add_active_range(0, 0, 260080) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 260080
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 260080
[ 0.000000] On node 0 totalpages: 260080
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 239 pages used for memmap
[ 0.000000] HighMem zone: 30465 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F65B0 checksum 0
[ 0.000000] ACPI: RSDP 000F65B0, 0014 (r0 GBT )
[ 0.000000] ACPI: RSDT 3F7F3000, 002C (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: FACP 3F7F3040, 0074 (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: DSDT 3F7F30C0, 3821 (r1 GBT AWRDACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS 3F7F0000, 0040
[ 0.000000] ACPI: APIC 3F7F6900, 0068 (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:2 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3f800000:bf400000)
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258049
[ 0.000000] Kernel command line: root=UUID=d29a9e8b-70b5-4f70-96f7-1528c44f76b1 ro quiet splash locale=zh_CN
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2411.640 MHz processor.
[ 16.689934] Console: colour VGA+ 80x25
[ 16.689940] console [tty0] enabled
[ 16.690784] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 16.691613] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 16.719241] Memory: 1019588k/1040320k available (2067k kernel code, 20104k reserved, 968k data, 360k init, 122816k highmem)
[ 16.719252] virtual kernel memory layout:
[ 16.719253] fixmap : 0xfffa6000 - 0xfffff000 ( 356 kB)
[ 16.719255] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 16.719256] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 16.719257] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 16.719258] .init : 0xc03fa000 - 0xc0454000 ( 360 kB)
[ 16.719259] .data : 0xc0304fb4 - 0xc03f73a4 ( 968 kB)
[ 16.719260] .text : 0xc0100000 - 0xc0304fb4 (2067 kB)
[ 16.719263] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 16.719331] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 16.799245] Calibrating delay using timer specific routine.. 4827.00 BogoMIPS (lpj=9654002)
[ 16.799286] Security Framework initialized
[ 16.799300] SELinux: Disabled at boot.
[ 16.799315] AppArmor: AppArmor initialized
[ 16.799321] Failure registering capabilities with primary security module.
[ 16.799329] Mount-cache hash table entries: 512
[ 16.799496] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 16.799508] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 16.799510] CPU: L2 cache: 512K
[ 16.799514] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00000000 00000000 00000000 00000000
[ 16.799525] Compat vDSO mapped to ffffe000.
[ 16.799541] CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
[ 16.799549] Checking 'hlt' instruction... OK.
[ 16.816936] Freeing SMP alternatives: 0k freed
[ 16.817085] Early unpacking initramfs... done
[ 17.163404] ACPI: Core revision 20070126
[ 17.163467] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 17.167129] ENABLING IO-APIC IRQs
[ 17.167300] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 17.314692] net_namespace: 64 bytes
[ 17.314700] Booting paravirtualized kernel on bare hardware
[ 17.315294] Time: 6:03:33 Date: 04/28/08
[ 17.315322] NET: Registered protocol family 16
[ 17.315544] EISA bus registered
[ 17.315569] ACPI: bus type pci registered
[ 17.341089] PCI: PCI BIOS revision 2.10 entry at 0xf9fb0, last bus=1
[ 17.341091] PCI: Using configuration type 1
[ 17.341093] Setting up standard PCI resources
[ 17.343211] ACPI: EC: Look up EC in DSDT
[ 17.346739] ACPI: Interpreter enabled
[ 17.346743] ACPI: (supports S0 S1 S4 S5)
[ 17.346757] ACPI: Using IOAPIC for interrupt routing
[ 17.351365] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 17.351779] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[ 17.351781] * this clock source is slow. If you are sure your timer does not have
[ 17.351782] * this bug, please use "acpi_pm_good" to disable the workaround
[ 17.351825] PCI quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO
[ 17.351828] PCI quirk: region 4080-40bf claimed by ICH4 GPIO
[ 17.352155] PCI: Transparent bridge - 0000:00:1e.0
[ 17.352178] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 17.352335] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 17.357610] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 17.357711] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 17.357810] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 17.357909] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 17.358008] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 17.358108] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 17.358209] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 17.358308] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 17.358423] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 17.358460] pnp: PnP ACPI init
[ 17.358469] ACPI: bus type pnp registered
[ 17.361635] pnp: PnP ACPI: found 13 devices
[ 17.361638] ACPI: ACPI bus type pnp unregistered
[ 17.361644] PnPBIOS: Disabled by ACPI PNP
[ 17.361893] PCI: Using ACPI for IRQ routing
[ 17.361897] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 17.418403] NET: Registered protocol family 8
[ 17.418406] NET: Registered protocol family 20
[ 17.418483] AppArmor: AppArmor Filesystem Enabled
[ 17.422390] Time: tsc clocksource has been installed.
[ 17.430424] system 00:00: iomem range 0xcba00-0xcbfff has been reserved
[ 17.430428] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 17.430432] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 17.430434] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 17.430437] system 00:00: iomem range 0x3f7f0000-0x3f7fffff could not be reserved
[ 17.430440] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 17.430443] system 00:00: iomem range 0x100000-0x3f7effff could not be reserved
[ 17.430446] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 17.430449] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 17.430451] system 00:00: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 17.430454] system 00:00: iomem range 0xfff00000-0xffffffff could not be reserved
[ 17.430457] system 00:00: iomem range 0xe0000-0xeffff has been reserved
[ 17.430465] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 17.430468] system 00:02: ioport range 0x290-0x29f has been reserved
[ 17.430471] system 00:02: ioport range 0x800-0x805 has been reserved
[ 17.460898] PCI: Bridge: 0000:00:1e.0
[ 17.460902] IO window: c000-cfff
[ 17.460907] MEM window: e0000000-e1ffffff
[ 17.460911] PREFETCH window: disabled.
[ 17.460925] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 17.460937] NET: Registered protocol family 2
[ 17.498350] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 17.498737] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 17.499917] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 17.500297] TCP: Hash tables configured (established 131072 bind 65536)
[ 17.500300] TCP reno registered
[ 17.510481] checking if image is initramfs... it is
[ 17.961646] Switched to high resolution mode on CPU 0
[ 18.193511] Freeing initrd memory: 7355k freed
[ 18.194116] audit: initializing netlink socket (disabled)
[ 18.194135] audit(1209362613.372:1): initialized
[ 18.194320] highmem bounce pool size: 64 pages
[ 18.196177] VFS: Disk quotas dquot_6.5.1
[ 18.196209] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 18.196374] io scheduler noop registered
[ 18.196377] io scheduler anticipatory registered
[ 18.196379] io scheduler deadline registered
[ 18.196392] io scheduler cfq registered (default)
[ 18.196408] Boot video device is 0000:00:02.0
[ 18.196741] isapnp: Scanning for PnP cards...
[ 18.550399] isapnp: No Plug & Play device found
[ 18.583056] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 18.583179] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.583326] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 18.584123] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.584506] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 18.585386] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 18.585459] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 18.585571] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 18.585575] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 18.586083] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 18.592771] mice: PS/2 mouse device common for all mice
[ 18.592896] EISA: Probing bus 0 at eisa.0
[ 18.592915] Cannot allocate resource for EISA slot 4
[ 18.592917] Cannot allocate resource for EISA slot 5
[ 18.592930] EISA: Detected 0 cards.
[ 18.592934] cpuidle: using governor ladder
[ 18.593032] NET: Registered protocol family 1
[ 18.593063] Using IPI Shortcut mode
[ 18.593094] registered taskstats version 1
[ 18.593204] Magic number: 4:239:65
[ 18.593318] hash matches device 0000:00:1e.0
[ 18.593332] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 18.593334] EDD information not available.
[ 18.593783] Freeing unused kernel memory: 360k freed
[ 18.620607] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 19.860053] fuse init (API version 7.9)
[ 20.262848] usbcore: registered new interface driver usbfs
[ 20.262876] usbcore: registered new interface driver hub
[ 20.271191] usbcore: registered new device driver usb
[ 20.272544] USB Universal Host Controller Interface driver v3.0
[ 20.272610] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 20.272622] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 20.272626] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 20.272925] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 20.272953] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d800
[ 20.273109] usb usb1: configuration #1 chosen from 1 choice
[ 20.273136] hub 1-0:1.0: USB hub found
[ 20.273143] hub 1-0:1.0: 2 ports detected
[ 20.374091] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
[ 20.374106] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 20.374110] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 20.374136] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 20.374163] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000d000
[ 20.374286] usb usb2: configuration #1 chosen from 1 choice
[ 20.374313] hub 2-0:1.0: USB hub found
[ 20.374320] hub 2-0:1.0: 2 ports detected
[ 20.477958] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 20.477974] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 20.477978] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 20.478008] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 20.478036] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
[ 20.478165] usb usb3: configuration #1 chosen from 1 choice
[ 20.478193] hub 3-0:1.0: USB hub found
[ 20.478200] hub 3-0:1.0: 2 ports detected
[ 20.544326] Linux Tulip driver version 1.1.15 (Feb 27, 2007)
[ 20.581863] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
[ 20.581882] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 20.581886] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 20.581913] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 20.585812] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 20.585822] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xe2080000
[ 20.602754] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 20.602920] usb usb4: configuration #1 chosen from 1 choice
[ 20.602953] hub 4-0:1.0: USB hub found
[ 20.602962] hub 4-0:1.0: 6 ports detected
[ 20.633896] SCSI subsystem initialized
[ 20.678313] libata version 3.00 loaded.
[ 20.705718] ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 22 (level, low) -> IRQ 20
[ 20.706326] tulip0: MII transceiver #1 config 1000 status 786d advertising 05e1.
[ 20.713038] eth0: ADMtek Comet rev 17 at Port 0xc000, 00:03:0f:f7:52:dc, IRQ 20.
[ 20.713333] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 20.763083] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[e1004000-e10047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 20.822047] ata_piix 0000:00:1f.1: version 2.12
[ 20.822070] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 20.822130] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 20.833294] scsi0 : ata_piix
[ 20.838983] scsi1 : ata_piix
[ 20.839690] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 20.839693] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 20.845442] Floppy drive(s): fd0 is 1.44M
[ 20.865009] FDC 0 is a post-1991 82077
[ 21.057448] ata1.00: ATA-6: ST380011A, 3.06, max UDMA/100
[ 21.057453] ata1.00: 156301488 sectors, multi 16: LBA48
[ 21.073446] ata1.00: configured for UDMA/100
[ 21.392771] ata2.00: ATAPI: TSSTcorpCD/DVDW TS-H652M, CM02, max UDMA/33
[ 21.552235] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 21.564459] ata2.00: configured for UDMA/33
[ 21.564607] scsi 0:0:0:0: Direct-Access ATA ST380011A 3.06 PQ: 0 ANSI: 5
[ 21.565637] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H652M CM02 PQ: 0 ANSI: 5
[ 21.599274] Driver 'sd' needs updating - please use bus_type methods
[ 21.610507] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 21.610524] sd 0:0:0:0: [sda] Write Protect is off
[ 21.610528] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 21.610548] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.610611] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 21.610623] sd 0:0:0:0: [sda] Write Protect is off
[ 21.610626] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 21.610644] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.610649] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 21.631392] sda1 sda2 < sda5 > sda3 sda4
[ 21.665222] sd 0:0:0:0: [sda] Attached SCSI disk
[ 21.673422] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 21.673447] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 21.680114] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 21.680121] Uniform CD-ROM driver Revision: 3.20
[ 21.680187] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 21.722700] usb 3-1: configuration #1 chosen from 1 choice
[ 21.963681] usb 3-2: new full speed USB device using uhci_hcd and address 3
[ 22.091540] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00308d0120c0958d]
[ 22.117538] usb 3-2: configuration #1 chosen from 1 choice
[ 22.120481] hub 3-2:1.0: USB hub found
[ 22.122448] hub 3-2:1.0: 4 ports detected
[ 22.217456] Attempting manual resume
[ 22.217461] swsusp: Resume From Partition 8:1
[ 22.217463] PM: Checking swsusp image.
[ 22.217677] PM: Resume from disk failed.
[ 22.242427] kjournald starting. Commit interval 5 seconds
[ 22.242445] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.452890] usb 3-2.1: new full speed USB device using uhci_hcd and address 4
[ 22.619731] usb 3-2.1: configuration #1 chosen from 1 choice
[ 22.628616] usbcore: registered new interface driver hiddev
[ 22.641841] input: USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/input/input2
[ 22.650612] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:1d.2-1
[ 22.650631] usbcore: registered new interface driver usbhid
[ 22.650635] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 29.940414] Real Time Clock Driver v1.12ac
[ 29.980036] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 30.677233] Linux agpgart interface v0.102
[ 30.693328] intel_rng: FWH not detected
[ 30.742314] agpgart: Detected an Intel 830M Chipset.
[ 30.742432] agpgart: Detected 8060K stolen memory.
[ 30.762631] agpgart: AGP aperture is 128M @ 0xd8000000
[ 30.780766] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 30.799098] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 30.809245] parport_pc 00:0a: reported by Plug and Play ACPI
[ 30.809288] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 30.840856] iTCO_vendor_support: vendor-support=0
[ 30.842221] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 30.851265] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x4060)
[ 30.851317] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 30.863237] i810_smbus 0000:00:02.0: i810/i815 i2c device found.
[ 31.065668] input: Power Button (FF) as /devices/virtual/input/input4
[ 31.090173] ACPI: Power Button (FF) [PWRF]
[ 31.090260] input: Power Button (CM) as /devices/virtual/input/input5
[ 31.118069] ACPI: Power Button (CM) [PWRB]
[ 31.118177] input: Sleep Button (CM) as /devices/virtual/input/input6
[ 31.150005] ACPI: Sleep Button (CM) [SLPB]
[ 32.654468] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x0E7C pid 0x133C
[ 32.654487] usbcore: registered new interface driver usblp
[ 32.965503] NET: Registered protocol family 10
[ 32.965732] lo: Disabled Privacy Extensions
[ 35.453602] 0000:01:02.0: tulip_stop_rxtx() failed (CSR5 0xfc664010 CSR6 0xff972113)
[ 35.453614] eth0: Setting full-duplex based on MII#1 link partner capability of 41e1.
[ 36.202262] lp0: using parport0 (interrupt-driven).
[ 36.313529] Adding 1951856k swap on /dev/sda1. Priority:-1 extents:1 across:1951856k
[ 38.662403] EXT3 FS on sda3, internal journal
[ 38.803886] device-mapper: uevent: version 1.0.3
[ 38.803921] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[ 43.392517] eth0: no IPv6 routers present
[ 55.208765] kjournald starting. Commit interval 5 seconds
[ 55.208972] EXT3 FS on sda4, internal journal
[ 55.208977] EXT3-fs: mounted filesystem with ordered data mode.
[ 55.813868] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 56.163052] PPP generic driver version 2.4.2
[ 56.181798] NET: Registered protocol family 17
[ 56.387848] NET: Registered protocol family 24
[ 56.941836] No dock devices found.
[ 59.669730] capifs: Rev 1.1.2.3
[ 60.362159] ppdev: user-space parallel port driver
[ 60.812952] audit(1209362656.758:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5429 profile="/usr/sbin/cupsd" namespace="default"
[ 60.919619] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 60.919625] apm: overridden by ACPI.
[ 61.642219] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 61.642228] vboxdrv: Successfully done.
[ 61.643681] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 61.643684] vboxdrv: Successfully loaded version 1.5.6_OSE (interface 0x00050002).
[ 62.182898] Bluetooth: Core ver 2.11
[ 62.185707] NET: Registered protocol family 31
[ 62.185713] Bluetooth: HCI device and connection manager initialized
[ 62.185717] Bluetooth: HCI socket layer initialized
[ 62.200747] Bluetooth: L2CAP ver 2.9
[ 62.200756] Bluetooth: L2CAP socket layer initialized
[ 62.277156] Bluetooth: RFCOMM socket layer initialized
[ 62.277179] Bluetooth: RFCOMM TTY layer initialized
[ 62.277182] Bluetooth: RFCOMM ver 1.8
[ 64.496893] [drm] Initialized drm 1.1.0 20060810
[ 64.501075] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 64.501087] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 64.501148] [drm] Initialized i915 1.6.0 20060119 on minor 0
回复